Influence of strain rate effect on material removal and deformation mechanism based on ductile nanoscratch tests of Lu2O3 single crystal
Source abstract
Abstract
Nanoscratch tests of LuO single crystal under different scratch velocities were performed using Berkovich and spherical indenters. The experimental results indicated that shallower penetration depth and lager continuous chips were generated during the scratching process when a higher scratch velocity was used. Moreover, two types of plastic flow lines were formed on the crystal surface after testing. A theoretical model on the penetration depth of scratching LuO single crystal was developed by considering the elastic recovery and strain rate effect. The predicted results were found to agree well with the experimental results, and the deviation was within 10%. The transmission electron microscopy (TEM) analysis results of the crack-free subsurface generated during the nanoscratch tests revealed that the ductile removal mechanism dominated by nanocrystalline and amorphous phases. Pressure-induced defects, such as dislocations, stacking faults, and nano twins were observed inside the nanocrystalline phase. High-angle annular dark-field (HAADF) images of the subsurface indicated that a higher scratch velocity could effectively reduce the subsurface damage depth when the normal force was maintained constant.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. An 11.5 W Yb: YAG planar waveguide laser fabricated via pulsed laser deposition10.1364/OME.6.000091 ↗
2. Optimizing Cr3+ concentration and evaluating energy transfer from Cr3+ to Nd3+ in Cr, Nd: GGG nanocrystals prepared by sol-gel method10.1016/S1002-0721(16)60137-0 ↗
3. Single crystal lutetium oxide thin film scintillators for X-ray imaging10.1088/1748-0221/11/10/C10010 ↗
4. Influence of air annealing temperature and time on the optical properties of Yb: YAG single crystal grown by HDS method10.1016/j.optmat.2015.04.019 ↗
5. A 670 W Yb: Lu2O3 thin-disk laser10.1002/lapl.201110104 ↗
6. Control of interface shape during high melting sesquioxide crystal growth by HEM technique10.1016/j.jcrysgro.2017.11.026 ↗
7. Hydrothermal single-crystal growth of Lu2O3 and lanthanide-doped Lu2O310.1021/cg2005166 ↗
8. Generation of 35-fs pulses from a Kerr lens mode-locked Yb: Lu2 O3 thin-disk laser10.1364/OE.25.014918 ↗
9. Crystal growth by the heat exchanger method, spectroscopic characterization and laser operation of high-purity Yb: Lu2O310.1016/j.jcrysgro.2007.10.078 ↗
10. Nanogrinding induced surface and deformation mechanism of single crystal β-Ga2O310.1016/j.mssp.2017.12.017 ↗
11. The influence of grain geometry and wear conditions on the material removal mechanism in silicon carbide grinding with single grain10.1016/j.ceramint.2017.06.047 ↗
12. Fractal analysis of surface topography in ground monocrystal sapphire10.1016/j.apsusc.2014.11.093 ↗
13. Surface integrity and removal mechanism of silicon wafers in chemo-mechanical grinding using a newly developed soft abrasive grinding wheel10.1016/j.mssp.2017.02.001 ↗
14. Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire10.1016/j.actamat.2011.04.054 ↗
15. Material removal mechanism of 6H-SiC studied by nano-scratching with Berkovich indenter10.1007/s00339-016-9802-7 ↗
16. Nanotwinning in monocrystalline silicon upon nanoscratching10.1016/j.scriptamat.2011.04.012 ↗
17. Research of material removal and deformation mechanism for single crystal GGG (Gd3Ga5O12) based on varied-depth nanoscratch testing10.1016/j.matdes.2017.04.018 ↗
18. Lattice bending in monocrystalline GaAs induced by nanoscratching10.1016/j.matlet.2012.04.057 ↗
19. Effect of scratch velocity on deformation features of C-plane Sapphire during nanoscratching10.5545/sv-jme.2012.679 ↗
20. Time and temperature dependence of the scratch properties of poly (methylmethacrylate) surfaces10.1023/A:1004798019914 ↗
21. On the combined use of scratch tests and CLA profilometry for the characterization of polyester powder coatings: influence of scratch load and speed10.1016/j.apsusc.2008.05.315 ↗
22. Modelling the strain rate sensitivity on the subsurface damages of scratched glass ceramics10.1016/j.ceramint.2017.06.191 ↗
23. Plastic deformation modes of gallium arsenide in nanoindentation and nanoscratching10.1063/1.2431763 ↗
24. Zur plastischen verformung von Germanium und InSb
25. Study on the machined depth when nanoscratching on 6H-SiC using Berkovich indenter: modelling and experimental study10.1016/j.apsusc.2016.02.032 ↗
26. Repeated nanoscratch and double nanoscratch tests of Lu2O3 transparent ceramics: material removal and deformation mechanism, and theoretical model of penetration depth10.1016/j.jeurceramsoc.2017.09.028 ↗
27. Liu · 2009
28. Evolution of shear bands in bulk metallic glasses under dynamic loading10.1016/j.jmps.2008.01.008 ↗
29. Effects of the friction coefficient on the minimum cutting thickness in micro cutting10.1016/j.ijmachtools.2004.09.001 ↗
30. Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining10.1016/S0924-0136(96)02429-6 ↗
31. Bhushan · 2013
32. Examples of Nanoindentation Testing
33. Indentation plasticity and the ensuing fracture of glass10.1088/0022-3727/9/15/011 ↗
34. Friction effect on contact pressure during indentation and scratch into amorphous polymers10.1016/j.matlet.2009.05.015 ↗
35. Elastic recovery of a scratch in a polymeric surface: experiments and analysis10.1016/S0301-679X(01)00043-3 ↗
36. Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design10.1016/j.enbuild.2014.11.063 ↗
37. Direct dynamic atomic mechanisms of strain-induced grain rotation in nanocrystalline, textured, columnar-structured thin gold films10.1016/j.scriptamat.2010.10.029 ↗
38. Grain rotation mediated by grain boundary dislocations in nanocrystalline platinum10.1038/ncomms5402 ↗
39. In situ measurement of grain rotation during deformation of polycrystals10.1126/science.1057956 ↗
40. A unified approach to motion of grain boundaries, relative tangential translation along grain boundaries, and grain rotation10.1016/j.actamat.2004.02.048 ↗
41. In situ observation of stress induced grain boundary migration in nanocrystalline gold10.1016/j.scriptamat.2017.03.003 ↗
42. Grain boundary migration during room temperature deformation of nanocrystalline Ni10.1016/j.scriptamat.2006.06.032 ↗
43. Y. Zhao, L.S. Toth, R. Massion, W. Skrotzki, Role of grain boundary sliding in texture evolution for nanoplasticity, Adv. Eng. Mater.
44. High-quality image formation by nonlocal means applied to high-angle annular dark-field scanning transmission electron microscopy (HAADF–STEM)
45. Damage behavior and atomic migration in MgAl2O4 under an 80 keV scanning focused probe in a STEM10.1016/j.micron.2014.05.010 ↗