Microstructural evolution and mechanical performances of SiC/SiC composites by polymer impregnation/microwave pyrolysis (PIMP) process

SiC/SiC composites were prepared by polymer impregnation/microwave pyrolysis (PIMP) process, and their microstructural evolution and the mechanical performances were characterized. Using non-coated Tyranno SA fiber preforms as reinforcement and impregnation with only allylperhydropolycarbosilane (AHPCS) into the preforms, Tyranno SA/SiC composite (TSA/SiC) with higher density was obtained. While using carbon-coated Tyranno SA fiber preforms, Tyranno SA/C/SiC composite (TSA/C/SiC) with lower density were also fabricated. In this composite, SiC particulate was loaded with polymer precursor (AHPCS) in the first cycle impregnation. Microstructural observation revealed that pore and crack formation was affected by processing conditions. Bending strength was also dependent on the microstructural evolution of the samples. In TSA/SiC composite, relatively strong interfaces contribute to effective load transfer so that higher bending strength could be reached. In the TSA/C/SiC composite, weak interfaces provide a relatively lower strength. Meanwhile, different microstructural evolution and interfacial properties of the composites lead to the variation of the fracture behaviors.