Biomimetic synthesis of spherical nano-hydroxyapatite in the presence of polyethylene glycol
Source abstract
Abstract
Abstract Spherical nano-hydroxyapatite (nano-HA) was synthesized successfully by a biomimetic method using Ca(NO 3 ) 2 ·4H 2 O and (NH 4 ) 3 PO 4 ·3H 2 O as reagents in the presence of polyethylene glycol (PEG). The crystalline phase, microstructure, chemical composition, and morphology of the obtained samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). The results show that spherical nano-HA with diameter of 30–50 nm can be synthesized in the presence of a certain concentration (2–6%) of PEG. The crystallinity of HA powder synthesized in the presence of PEG was higher than that synthesized in the absence of PEG, but the crystallinity of HA reduced with increasing the concentration of PEG. The electrical conductivity (EC) of the solution revealed that PEG reduced the transfer rate of Ca 2+ in the process of HA crystallization, indicating the interaction between PEG and HA. The possible mechanism of formation spherical nano-HA was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Calcium phosphate ceramic as hard tissue prosthetics10.1097/00003086-198106000-00037 ↗
2. Tissue, cellular and subcellular events at a bone–ceramic hydroxylapatite interface
3. Effect of Ca/P coating resorption and surgical fit on the bone/implant interface10.1002/jbm.820281109 ↗
4. HA synthesis and characterisation in dense poly-crystalline form10.1007/BF02403350 ↗
5. Comparison of hydroxyapatite ceramics and hydroxyapatite/borosilicate glass composites prepared by slip casting10.1016/j.ceramint.2003.12.119 ↗
6. Mechanical properties of sintered hydroxyapatite for prosthetic applications10.1007/BF02402799 ↗
7. The bone–biomaterial interface for load-bearing implants10.1557/S0883769400056074 ↗
8. Improvement of the mechanical properties of chitosan films by the addition of poly(ethylene oxide)10.1002/pen.11248 ↗
9. Eutectic mixtures for pharmaceutical applications: a thermodynamic and kinetic study10.1016/S0040-6031(96)03077-8 ↗
10. Preparation and characterization of thermally stable nanohydroxyapatite10.1023/A:1018586128257 ↗
11. Oxidation of polyethylene glycols by alcohol dehydrogenase10.1016/0006-2952(89)90151-2 ↗
12. Preparation of needle-like hydroxyapatite by homogeneous precipitation under hydrothermal conditions10.1002/jctb.280570409 ↗
13. Effect of chain density on inhibition of protein adsorption by poly(ethylene glycol) based coatings10.1006/jcis.1998.5513 ↗
14. Controlling nonspecific pProtein interactions in silicon biomicrosystems with nanostructured poly(ethylene glycol) films10.1021/la026097f ↗
15. PEG-assisted synthesis of ZnO nanotubes10.1016/j.matlet.2005.12.052 ↗
16. Structural characterization of silicon-substituted hydroxyapatite synthesized by a hydrothermal method10.1016/j.matlet.2005.06.060 ↗
17. Synthesis of ZnO nanowhiskers by a simple method10.1016/S0167-577X(03)00269-6 ↗
18. Molecular weight dependence of calcification of polyethylene glycol hydrogels10.1016/0142-9612(94)90118-X ↗