journal article·2013-05

Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting

Shengjin Wang, Dechang Jia, Zhihua Yang, Xiaoming Duan, Zhuo Tian, Yu Zhou

Ceramics International· Volume 39· Issue 4
Publisher page

Abstract

Abstract Porous BN/Si 3 N 4 composite ceramics with different BN contents have been fabricated by gel casting. The rheological behaviors of the suspensions, microstructure, mechanical properties, dielectric properties and critical temperature difference of thermal shock (Δ T C ) of porous BN/Si 3 N 4 composite ceramics with different BN contents were investigated. With BN contents increasing, the mechanical properties of the porous BN/Si 3 N 4 composite ceramics were partially declined, but the dielectric properties and thermal shock resistances were enhanced at the same time. For the porous Si 3 N 4 ceramic without BN addition, the porosity, flexural strength, dielectric constant and critical temperature difference were 48.1%, 128 MPa, 4.1 and 395 °C, while for the 10 vol% BN/Si 3 N 4 porous composite ceramics, they were 49.4%, 106.6 MPa, 3.8, and 445 °C, respectively. The overall performance of the obtained porous BN/Si 3 N 4 composite ceramics indicated that it could be one of the ideal candidates for high-temperature wave-transparent applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
2. Si3N4 and Si2N2O for high performance radomes10.1016/0025-5416(85)90236-8 ↗
3. Mechanical and dielectric properties of porous Si3N4–SiOe composite ceramics10.1016/j.msea.2008.09.066 ↗
4. High performance porous Si3N4 ceramics prepared by coated pore-forming agent method10.1016/j.ceramint.2009.05.007 ↗
5. Dielectric and mechanical properties of porous Si3N4 ceramics prepared via low temperature sintering10.1016/j.ceramint.2008.09.010 ↗
6. Study on high properties and microwave-transmitting Si3N4–BN based ceramic composites
7. Effects of weak boundary phases (WBP) on the microstructure and mechanical properties of pressureless sintered Al2O3/h-BN machinable composites10.1016/j.msea.2008.03.004 ↗
8. Effect of porosity and microstructure on the strength of Si3N4: designed microstructure for high strength, high thermal shock resistance, and facile machining10.1111/j.1151-2916.1997.tb03179.x ↗
9. Fabrication and microstructure of silicon nitride/boron nitride nanocomposites10.1111/j.1151-2916.2002.tb00514.x ↗
10. Fabrication of machinable silicon carbide–boron nitride ceramic nanocomposites10.1111/j.1551-2916.2004.00565.x ↗
11. Fracture behavior of multilayer silicon nitride/boron nitride ceramics10.1111/j.1151-2916.1996.tb08996.x ↗
12. Boron nitride effect on the thermal shock resistance of an alumina-based ceramic composite10.1007/BF01729282 ↗
13. Machinability of silicon nitride/boron nitride nanocomposites10.1111/j.1151-2916.2002.tb00515.x ↗
14. BN/Si3N4 nanocomposite with high strength and good machinability10.1016/j.msea.2005.09.085 ↗
15. Enhanced mechanical properties of machinable Si3N4/BN composites by spark plasma sintering10.1016/j.msea.2006.09.158 ↗
16. A new direct coagulation casting process for alumina slurries prepared using poly(acrylate) dispersant10.1016/j.ceramint.2008.04.004 ↗
17. Gelcasting of zirconia using agarose10.1111/j.1551-2916.2006.01040.x ↗
18. Powder processing science and technology for increased reliability10.1111/j.1151-2916.1989.tb05945.x ↗
19. Rapid coagulation of silicon carbide slurry via direct coagulation casting10.1016/S0272-8842(03)00125-1 ↗
20. Application of monosaccharides derivatives in colloidal processing of aluminum oxide10.1016/j.jeurceramsoc.2010.03.003 ↗
21. Novel method for fabrication of silicon nitride/silicon oxynitride composite ceramic foams using fly ash cenosphere as a pore-forming agent10.1111/j.1551-2916.2008.02702.x ↗
22. Alumina bodies with near-to-theoretical density by aqueous gelcasting using concentrated agarose solutions10.1016/j.ceramint.2004.06.007 ↗
23. Optimizing the rheological behavior of silicon nitride aqueous suspensions
24. Effect of acid cleaning and calcination on rheological properties of concentrated aqueous suspensions of silicon nitride powder10.1111/j.1151-2916.2002.tb00087.x ↗
25. Silicon nitride ceramics with celsian as an additive10.1007/BF00355139 ↗
26. Kinetics of β-Si3N4 grain growth in Si3N4 ceramics sintered under high nitrogen pressure10.1111/j.1151-2916.1993.tb03693.x ↗
27. Factors affecting thermal stress resistance of ceramic materials10.1111/j.1151-2916.1955.tb14545.x ↗
28. Thermal shock resistance of porous silicon nitride ceramics10.1023/A:1022678606160 ↗
29. Thermal shock resistance of in situ formed Si2N2O–Si3N4 composites by gel casting10.1016/j.ceramint.2009.05.037 ↗