Preparation and characterization of TiO2–SiO2 nano-composite thin films
Source abstract
Abstract
Abstract TiO2 nanocrystalline particles dispersed in SiO2 have been prepared by the sol-gel method using titanium- and silicon-alkoxides as precursors. Nano-composite thin films were formed on the glass substrates by dip-coating technique and heat treated at temperatures up to 500 °C for 1 h. The size of the TiO2 nanocrystalline particles in the TiO2–SiO2 solution ranged from 5 to 8 nm. The crystalline structure of TiO2 powders was identified as the anatase phase. As the content of SiO2 increased, the anatase phase tended to be stabilized to higher temperature. TEM results revealed the presence of spherical TiO2 particles dispersed in a disk-shaped glassy matrix. Photocatalytic activity of the TiO2–SiO2 (1:1) thin films showed decomposition of ∼95% of methylene blue solution in 2 h and a contact angle of ∼10°. The photocatalytic decomposition of methylene blue increased and the contact angle decreased with the content of TiO2 phase. TiO2–SiO2 with the molar ratio of 1:1 showed a reasonable combination of adhesion, film strength, and the photocatalytic activity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Anatase-to-rutile transition of titania films prepared by MOCVD10.1016/S0025-5408(96)00203-6 ↗
2. Structural characterization of TiO2 thin films obtained by pulsed laser deposition10.1016/S0169-4332(98)00486-3 ↗
3. Structural and optical properties of TiO2 thin films and TiO2+2wt% ZnFe2O4 composite film prepared by r.f. sputtering10.1016/S0040-6090(00)00725-2 ↗
4. Investigations of titanium oxide films deposited by d.c. reactive magnetron sputtering in different sputtering pressures10.1016/0040-6090(93)90200-9 ↗
5. Synthesis of high surface area titania powders via basic hydrolysis of titanium (IV) isopropoxide10.1016/S0032-5910(97)03250-6 ↗
6. Characterization of titania/silica gel by means of low-pressure nitrogen adsorption10.1006/jcis.2000.7047 ↗
7. Structure of chemical vapor deposition titania/silica gel10.1006/jcis.1999.6411 ↗
8. Burch · 1988
9. Catalytic performance of Al2O3/SiO2/TiO2 loaded with V2O5 for the selective catalytic reduction of NOx with ammonia10.1016/S0920-5861(97)00116-8 ↗
10. Lewis acid and base sites at the surface of microcrystalline TiO2 anatase10.1016/S0926-860X(00)00641-4 ↗
11. FT-IR assessment through pyridine adsorption of the surface acidity of alkali-doped MoO3/TiO210.1006/jcat.1994.1079 ↗
12. The influence of preparation chemistry on the phase distribution of silica-supported titania10.1016/S0166-9834(00)80634-X ↗
13. Enhanced photocatalytic activity of supported TiO210.1016/S1010-6030(98)00470-5 ↗
14. Brinker · 1990
15. Sol–gel synthesis and hydrothermal processing of anatase and rutile titania nonacrystals10.1021/cm990180f ↗
16. Study of TiO2 nanocrystallites in TiO2–SiO2 composites10.1016/S0927-7757(97)00111-8 ↗
17. Crystallization of SiO2–TiO2 glassy films studied by atomic force microscopy10.1016/S0022-3093(00)00212-X ↗
18. Phase transformation in sol–gel titania containing silica10.1016/S0167-577X(98)00152-9 ↗