Characterization of ceramic bricks incorporated with textile laundry sludge
Source abstract
Abstract
Abstract Solidification/stabilization (S/S) treatment of wastes is a suitable alternative to immobilize contaminants within a chosen material. This work proposes the mixing of textile laundry wastewater sludge with clay in order to produce bricks for civil construction. The applied sludge and clay were previously characterized in terms of their composition, microstructure and thermal behavior. Ceramic bricks were fabricated with different quantities of textile laundry sludge and they were evaluated in terms of their mechanical characteristics, besides environmental issues verified through leaching and solubilization tests. The obtained results showed that sludge can be incorporate until a concentration of 20% (mass basis) producing suitable bricks in terms of its mechanical properties. Besides, the produced brick are safe and inert according to the applied leaching and solubilization tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Hygrothermal properties of building materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ceramic membrane behavior in textile wastewater ultrafiltration10.1016/j.desal.2009.09.037 ↗
2. ABNT, NBR 10004/04, Classification of Solid Wastes, Rio de Janeiro, 2004.
3. A review of solidification stabilization technology10.1016/0304-3894(87)87002-4 ↗
4. Sintering behaviour of ceramic bodies from contaminated marine sediments10.1016/j.ceramint.2007.07.002 ↗
5. Incorporation of solid wastes in red ceramics—an updated review
6. Recycling of industrial and urban wastes in brick production: a review
7. Synthesis and characterization of ceramics from coal fly ash and incinerated paper mill sludge10.1016/j.ceramint.2007.08.002 ↗
8. ABNT, NBR 7181-84, Soil: Granulometric Analysis, Rio de Janeiro, 1984.
9. ABNT, NBR 6459-84, Soil: Determination of Liquidity Limit, Rio de Janeiro, 1984.
10. ABNT, NBR 7180-84, Soil: Determination of Plastic Limit, Rio de Janeiro, 1984.
11. ABNT, NBR 10005, Solid Wastes—Leaching, Rio de Janeiro, 2004.
12. ABNT, NBR 10006, Solid Wastes—Solubilization, Rio de Janeiro, 2004.
13. ABNT, NBR 15270-3/05 (Appendix C): Flexural rupture Strength Measurement of Ceramic Bricks, Rio de Janeiro, 2005.
14. ABNT, NBR 15270-3/05 (Appendix B): Water adsorption Measurements of Ceramic Bricks, Rio de Janeiro, 2005.
15. The Makoro kaolin deposit, southeastern Botswana: its genesis and possible industrial applications10.1016/S0169-1317(99)00059-9 ↗
16. Ceramic properties of clay from the Asseiceira quarry at Tomar, Portugal10.3989/mc.2005.v55.i279.193 ↗
17. The use of a calcium carbonate residue from the stone industry in manufacturing of ceramic tile bodies10.1016/j.clay.2008.08.003 ↗
18. Processing of red ceramics incorporated with encapsulated petroleum waste10.1016/j.jmatprotec.2009.05.018 ↗
19. Characterization of waste clay from the Sardes (Salihli) placer gold mine and its utilization in floor-tile manufacture10.1016/j.clay.2009.08.021 ↗
20. Effect of sintering temperature on the characteristics of sludge ceramsite10.1016/j.jhazmat.2007.04.121 ↗
21. Use of life cycle assessment as decision-support tool for water reuse and handling of residues at a Danish industrial laundry10.1177/0734242X04046489 ↗
22. Environmental and technical aspects of the utilisation of tannery sludge as a raw material for clay products10.1016/S0955-2219(02)00024-9 ↗
23. Characteristics of bricks made from waste steel slag10.1016/j.wasman.2004.08.006 ↗