Properties of lanthanum doped BaTiO3 produced from nanopowders
Source abstract
Abstract
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 °C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Advanced in sintered electronic materials
2. Influence of foreign ions on the crystal structure of BaTiO310.1016/S0955-2219(00)00076-5 ↗
3. Doping mechanisms and electrical properties of La-doped BaTiO3 ceramics10.1016/S1466-6049(01)00128-3 ↗
4. Effect of lanthanum doping on electrical and electromechanical properties of Ba1−xLaxTiO310.1007/BF02706721 ↗
5. Influence of liquid phase on grain growth of Ba0.998Ti0.002TiO3 ceramics10.1016/S1002-0721(07)60549-3 ↗
6. Electrical and structural characteristics of lanthanum-doped barium titanate ceramics10.1063/1.371698 ↗
7. Synthesis of barium titanate nanopowder using polymeric precursor method10.1016/j.ceramint.2004.12.012 ↗
8. Microstructure of doped barium titanate prepared from polymeric precursors
9. Characterization of barium titanate prepared by polymeric precursors method
10. Preparation and characterization on nano-sized barium titanate powder doped with lanthanum by sol–gel process10.1016/S1002-0721(07)60329-9 ↗
11. Effect of powder synthesis method on BaTiO3 ceramics10.2298/PAC0801027V ↗
12. Dielectric properties of porous Ba0.997La0.003Ti1.0045O3 ceramics10.1016/S0955-2219(98)00377-X ↗
13. Subsolidus grain growth in donor doped barium titanate10.1007/BF00354575 ↗
14. Size effect on dielectric properties of fine-grained BaTiO3 ceramics10.1016/S0272-8842(99)00009-7 ↗
15. Structure and properties of donor doped barium titanate prepared by citrate process10.1080/00150190211238 ↗
16. Sintering of nanocrystalline BaTiO310.1016/j.ceramint.2003.12.141 ↗
17. Shift of the curie point of barium titanate ceramics with sintering temperature10.1111/j.1151-2916.1997.tb03161.x ↗
18. Dielectric properties and aging of fast-fired barium titanate
19. Dielectric properties of barium titanate ceramics with different materials powder size10.1016/j.ceramint.2008.04.030 ↗