Sintering of nanocrystalline BaTiO3
Source abstract
Abstract
Abstract Two-step sintering method was employed to consolidate nano-size BaTiO 3 powders. The two-step sintering method comprises the initial heating at relatively higher temperatures and the following low-temperature sintering for a long period of heating. Pressed green bodies of BaTiO 3 were first heated to 1300 °C to achieve an intermediate density (>75% of theoretical density), then cooled down and held at 1100 °C for 0–20 h until they became fairly dense. Slight grain growth progressed during the second step, whereas the density significantly increased. The average grain size of dense ceramics was around 1 μm. The dielectric constant of BaTiO 3 was much greater than that of the normal sintering method. Furthermore, Dy-doped BaTiO 3 showed much smaller grain sizes than the undoped BaTiO 3 , which is comparable with the conventional sintering behavior of BaTiO 3 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. BaTiO3 properties and powder characteristics for ceramic capacitors
2. Grain-size effects on dielectric properties in barium titanate ceramics10.1063/1.322330 ↗
3. Preparation, characterization, and properties of Dy-doped small-grained BaTiO3 ceramics10.1111/j.1151-2916.1977.tb15479.x ↗
4. Preparation of small-grained and large-grained ceramics from Nb-doped BaTiO310.1111/j.1151-2916.1971.tb12383.x ↗
5. Structure and properties of (Ba, Ca)TiO3 ceramics prepared using (Ba, Ca)CO3 precursors: 1. Crystallographic and microstructural studies10.1111/j.1151-2916.1994.tb07055.x ↗
6. Nanosintering10.1016/S0965-9773(99)00284-6 ↗
7. High pressure/low temperature sintering of nanocrystalline alumina10.1016/S0965-9773(98)00125-1 ↗
8. M.J. Mayo, Nanocrystalline ceramics for structural application: processing and properties, in: Nanostructure Materials, Kluwer Academic Publishers, The Netherlands, 1998, pp. 361–385.10.1007/978-94-011-5002-6_18 ↗
9. Sintering dense nanocrystalline ceramics without final-stage grain growth10.1038/35004548 ↗
10. Sintering of fine oxide powder: I. Microstructural evolution10.1111/j.1151-2916.1996.tb08087.x ↗
11. Sintering of fine oxide powder: II10.1111/j.1151-2916.1997.tb02879.x ↗
12. M. Pechini, Barium titanium citrate, barium titanate and processes for producing the same, US Patent 3,330,697 (1967).
13. Solubility of TiO2 in BaTiO310.1111/j.1151-2916.1981.tb09894.x ↗
14. B.D. Cullity, Diffraction under nonideal conditions, in: Elements of X-Ray Diffraction, second ed., Addison-Wesley Publishing Company, Inc., USA, 1978, pp. 99–106.
15. Grain-growth transition during sintering of colloidally prepared alumina powder compacts10.1111/j.1151-2916.1988.tb05787.x ↗
16. V.V. Skorokhod, A.V. Ragulya, Features of nanocrystalline structure formation on sintering of ultra-fine powders, in: Nanostructure Materials, Kluwer Academic Publishers, The Netherlands, 1998, pp. 387–404.10.1007/978-94-011-5002-6_19 ↗
17. J. Nowotny, Nonstoichiometry and related properties of ceramics interfaces, in: Science of Ceramic Interfaces II, Elsevier, Amsterdam, 1994, pp. 1–31.10.1016/S0166-6010(06)80003-2 ↗
18. Preparation of uniformly small-grained BaTiO3
19. Phenomenological theory of high permittivity in fine-grained barium titanate10.1111/j.1151-2916.1966.tb13144.x ↗
20. Effect of two-dimensional pressure on the permittivity of fine and coarse-grained barium titanate10.1111/j.1151-2916.1992.tb04363.x ↗
21. Dielectric properties of fine-grained barium titanate ceramics10.1063/1.336051 ↗