Role of RE2O3-MgO in microstructure regulation and thermal-mechanical properties of Si3N4 ceramics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Effect of silicon nitride coating thickness on silicon wafer substrates for signal enhancement in laser-induced breakdown spectroscopic analysis of liquids10.1016/j.sab.2022.106472 ↗
2. Kane · 2014 · 79
3. Effects of rare-earth oxides on microstructure, thermal conductivity, and mechanical properties of silicon nitride10.1111/jace.70028 ↗
4. The effect of annealing temperature on flexural strength, dielectric loss and thermal conductivity of Si3N4 ceramics10.1016/j.jallcom.2019.152203 ↗
5. Improved thermal conductivity of β-Si3N4 ceramics by lowering SiO2/Y2O3 ratio using YH2 as sintering additive10.1111/jace.17271 ↗
6. Preparation of Si3N4 ceramics with high thermal conductivity and mechanical properties using novel Gd3Si2C2 as a sintering aid10.1016/j.ceramint.2024.12.425 ↗
7. Role of graphene surface coating of DBC substrate on sintering motion behavior of copper nanoparticles for silicon carbide power devices
8. Fabrication of Si3N4 ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering10.1016/j.jeurceramsoc.2022.04.049 ↗
9. High performance and dense Si3N4 ceramic prepared by gelcasting combined with reaction re-sintering method10.1016/j.ceramint.2024.05.384 ↗
10. Tape casting technique in the fabrication of ceramic membranes: a review of influential factors and applications in water and wastewater treatment10.1016/j.seppur.2025.131871 ↗
11. Limiting the lattice oxygen impurities to obtain high thermal conductivity aluminum nitride ceramics10.1016/j.ceramint.2024.06.164 ↗
12. Densification, microstructure, thermal and mechanical properties of Si3N4 ceramics: effect of Y2Si4N6C and MgSiN2 content10.1016/j.ceramint.2024.07.215 ↗
13. Opportunities for enhancing the thermal conductivities of SiC and Si3N4 ceramics through improved processing
14. Effect of microstructure on the thermal conductivity of hot-pressed silicon nitride materials10.1111/j.1151-2916.2002.tb00066.x ↗
15. Microstructure tailoring for high thermal conductivity of β-Si3N4 ceramics10.1111/j.1151-2916.2003.tb03305.x ↗
16. Spark plasma sintered silicon nitride ceramics with high thermal conductivity using MgSiN2 as additives10.1111/j.1551-2916.2009.03139.x ↗
17. Influence of α-Si3N4 coarse powder on densification, microstructure, mechanical properties, and thermal behavior of silicon nitride ceramics10.1016/j.ceramint.2023.04.003 ↗
18. Rapid preparation of Si3N4 ceramics with high thermal conductivity and low dielectric loss by fast hot-pressing (FHP) sintering10.1016/j.ceramint.2024.07.223 ↗
19. Fabrication of Si3N4 ceramics with improved thermal conductivity by carbothermal reduction and two-step sintering10.1111/jace.20023 ↗
20. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides10.1111/jace.16015 ↗
21. A tough silicon nitride ceramic with high thermal conductivity10.1002/adma.201102462 ↗
22. Effect of sintering additive composition on the processing and thermal conductivity of sintered reaction-bonded Si3N410.1111/j.1151-2916.2004.tb07747.x ↗
23. Low-temperature fabrication of Si3N4 ceramics with high thermal conductivities using a single Mg2Si sintering additive10.1016/j.ceramint.2023.09.293 ↗
24. Fabrication and properties of pressure-sintered reaction-bonded Si3N4 ceramics with addition of Eu2O3–MgO–Y2O310.1016/j.ceramint.2020.08.205 ↗
25. Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties10.1016/j.jeurceramsoc.2019.10.003 ↗
26. Effects of different types of rare Earth oxide additives on the properties of silicon nitride ceramic substrates10.1016/j.ceramint.2019.03.176 ↗
27. Investigation on thermal conductivity and mechanical properties of Si3N4 ceramics via one-step sintering10.1016/j.ceramint.2021.08.238 ↗
28. Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives10.1016/j.ceramint.2016.07.024 ↗
29. Effect of sintering aids content and powder characteristics on gas pressure sintered Si3N4 ceramics10.1016/j.ceramint.2023.12.159 ↗
30. Effects of Y2O3/MgO ratio on mechanical properties and thermal conductivity of silicon nitride ceramics
31. Effect of the ratio of Y2O3 and MgSiN2 sintering additives on the microstructure, thermal and mechanical properties of Si3N4 ceramics10.1016/j.ceramint.2023.08.332 ↗
32. The effects of silicon additive content on thermal conductivity and mechanical properties of Si3N4 ceramics
33. Improved thermal conductivity of β-Si3N4 ceramics through the modification of the liquid phase by using GdH2 as a sintering additive10.1016/j.ceramint.2020.10.148 ↗
34. Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics10.1016/j.jeurceramsoc.2020.06.005 ↗
35. Thermal conductivity of β-Si3N4: III, effect of rare-earth (RE = La, Nd, Gd, Y, Yb, and Sc) oxide additives10.1111/j.1151-2916.2001.tb00662.x ↗
36. Effect of rare Earth oxide additives on the phase transformation rates of Si3N410.1111/j.1551-2916.2006.01106.x ↗
37. Microstructure and thermal conductivity of gas-pressure-sintered Si3N4 ceramic: the effects of Y2O3 additive content10.1016/j.jeurceramsoc.2020.08.035 ↗
38. Sintering of Si3N4 with the addition of rare-earth oxides
39. Effects of MgSiN2 addition and post-annealing on mechanical and thermal properties of Si3N4 ceramics10.1016/j.ceramint.2020.03.097 ↗
40. Effects of sintering temperature and holding time on sintering behavior, mechanical properties and thermal conductivity of silicon nitride ceramics10.1016/j.ceramint.2025.03.356 ↗
41. Preparation and performance study of silicon nitride ceramic substrate with high thermal conductivity
42. 3D gel printing of alumina ceramics followed by efficient multi-step liquid desiccant drying10.1016/j.jeurceramsoc.2021.05.034 ↗
43. Mechanical properties and contact damage behavior in aligned silicon nitride materials10.1111/j.1551-2916.2007.01620.x ↗
44. Effect of a new nonoxide additive, Y3Si2C2, on the thermal conductivity and mechanical properties of Si3N4 ceramics10.1111/ijac.14132 ↗