journal article·2024-12Open access

Properties of foam glass produced with the use of soot from a cement factory as a foaming agent: A study based on Taguchi design of experiments

Masoud Osfouri, Jamal-Eldin F.M. Ibrahim, Andrea Simon

Ceramics International· Volume 50· Issue 24

Abstract

Cellular glass is a lightweight, porous medium with excellent heat transfer resistance that can be used in a variety of industries. This study investigated the use of soot from cement plants as a new foaming agent for producing foam glass. The experiments were designed using the Taguchi Design of Experiments (DOE) method. By applying this approach, instead of creating and testing 27 different groups of samples, only 9 groups were produced. The properties of the remaining 18 sample groups were then predicted based on Taguchi analysis. Soot and silicon carbide were used simultaneously (at weight ratios of 2 % and 3 %) as foaming agents in the samples. Alumina was also used as a modifier with weight ratios of 4 %, and 8 %. Mechanical strength, water absorption, density, and thermal resistance were evaluated. The findings indicated a direct correlation between elevated soot content and increased water absorption (open porosity), coupled with a reduction in compressive strength and overall density of the foam glass. Electron microscopy observations revealed a wide range of crystallite morphologies in the resulting foam glass, which results in diverse properties in the material. The developed glass foams exhibit a density spanning from 125 to 700 kg/m 3 , with compressive strength varying between 1.2 and 6.7 MPa, and thermal conductivity in the range of 0.08–0.5 W/m·K. The samples with 3 % soot, 0 % alumina, and 3 % SiC exhibited exceptional thermal insulation properties. In contrast, the samples containing 1 % soot, 8 % alumina, and 1 % SiC demonstrated the highest compressive strength. Overall, this study found that soot from cement plants is a viable foaming agent for producing foam glass with desirable properties. The use of soot from cement plants can not only reduce the dispersion of pollution in the environment but also produce a wide range of foam glass with different properties at a lower cost.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. Kitaigorodskii · 1953
2. Lightweight concrete based on crushed foam glass aggregate
3. Preparation and characterization of foam glass from waste container glasses and water glass for application in thermal insulations10.1016/j.ceramint.2020.01.211 ↗
4. Dynamic properties of lightweight foamed glass and their effect on railway vibration10.1016/j.trgeo.2019.100276 ↗
5. Corrosion under insulation examination to prevent failures in equipment at a petrochemical plant10.1007/s11668-021-01135-5 ↗
6. The detection of porous media volume using the modified Archimedes method10.14382/epitoanyag-jsbcm.2023.07 ↗
7. Foam glass with low apparent density and thermal conductivity produced by microwave heating
8. Effect of high titanium blast furnace slag on preparing foam glass–ceramics for sound absorption10.1007/s10934-019-00722-0 ↗
9. On the application of foam glass in interior design
10. Utilizing multi-solid waste to prepare and characterize foam glass ceramics10.1016/j.ceramint.2023.08.232 ↗
11. Utilization and study of lightweight concrete properties with foam glass-based aggregate in the field of civil engineering10.1063/5.0136923 ↗
12. Study on the thermal conductivity and density of foam glass
13. Impact of compaction ratio and loading period on compressional behavior of foam glass aggregates
14. Formation of closed pore structure in CaO-MgO-Al2O3-SiO2 (CMAS) porous glass-ceramics via Fe2O3 modified foaming for thermal insulation10.1016/j.jeurceramsoc.2022.11.053 ↗
15. An investigation of foaming additives and usage rates in the production of ultra-light foam glass10.1007/s10973-021-10781-8 ↗
16. Dust cleaning of working areas in the production of granulated foam glass ceramics10.1063/5.0072038 ↗
17. Peculiarities of foam glass synthesis from natural silica-containing raw materials10.1007/s10973-020-10015-3 ↗
18. Impact of pore structure on the thermal conductivity of glass foams10.1016/j.matlet.2019.04.106 ↗
19. Effect of porosity on physical properties of lightweight cement composite with foamed glass aggregate
20. Characterisation of porous glasses prepared from cathode ray tube (CRT)10.1016/j.powtec.2005.12.003 ↗
21. Synthesis and properties of open-and closed-porous foamed glass with a low density10.1016/j.conbuildmat.2020.118574 ↗
22. Manufacture and uses of foam glass
23. Scarinci
24. Electrophysical characteristics of a foam glass crystal material10.1007/s11182-014-0130-0 ↗
25. Effect of alkali phosphate content on foaming of CRT panel glass using Mn3O4 and carbon as foaming agents10.1016/j.jnoncrysol.2017.12.041 ↗
26. Innovative glass-ceramic foams prepared by alkali activation and reactive sintering of clay containing zeolite (zeolite-poor rock) and sawdust for thermal insulation
27. Glass-ceramic foams produced from zeolite-poor rock (Tokaj)
28. Dynamics of foam glass structure formation using glass waste and liquid foaming mixture10.1016/j.jclepro.2023.138994 ↗
29. Customizing the properties of borosilicate foam glasses via additions under low sintering temperatures with insights from molecular dynamics simulations10.1016/j.jnoncrysol.2021.121273 ↗
30. Study on factors affecting properties of foam glass made from waste glass10.32604/jrm.2021.012228 ↗
31. Formation of pale foam glass from colored glass cullet10.2109/jcersj2.19191 ↗
32. An investigation of foaming additives and usage rates in the production of ultra-light foam glass
33. Synthesis and properties of foam glass-ceramics from granite tailings by using SiC and MnO2 as the mixed foaming agent10.1016/j.ceramint.2023.08.120 ↗
34. Application of foaming agent–oxidizing agent couples to foamed-glass formation10.1016/j.jnoncrysol.2020.120469 ↗
35. Novel glass foam with microwave absorption properties obtained from waste glass, C and Fe2O310.1016/j.jnoncrysol.2022.122069 ↗
36. Formation of closed pore structure in CaO-MgO-Al2O3-SiO2 (CMAS) porous glass-ceramics via Fe2O3 modified foaming for thermal insulation10.1016/j.jeurceramsoc.2022.11.053 ↗
37. Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface
38. The use of egg shells to produce Cathode Ray Tube (CRT) glass foams10.1016/j.ceramint.2013.05.002 ↗
39. Glass foams produced from glass bottles and eggshell wastes10.1016/j.psep.2017.06.011 ↗
40. Eggshells as agro‐industrial waste substitute for CaCO3 in glass foams: a study on obtaining lower thermal conductivity10.1111/ijac.13690 ↗
41. Preparation, characterization, and physicomechanical properties of glass-ceramic foams based on alkali-activation and sintering of zeolite-poor rock and eggshell10.1016/j.ceramint.2022.05.267 ↗
42. Tian, G., ANALYSIS OF POLLUTION CHARACTERISTICS OF ORGANIC AIR POLLUTANTS IN NEW DRY PROCESS CEMENT PRODUCING.
43. Optimization of the technology for the production of foam glass aggregate
44. Foam glass lightweight aggregate: the new approach
45. The glassy state of matter: its definition and ultimate fate10.1016/j.jnoncrysol.2017.05.019 ↗
46. Effect of foaming temperature and holding time on foam glass
47. Effect of sintering temperatures and foaming agent content to the physical and structural properties of wollastonite based foam glass-ceramics10.2298/SOS2003269J ↗
48. A state-of-the-art review on high temperature resistance of lightweight aggregate high-strength concrete10.1016/j.jobe.2023.106267 ↗
49. Effect of carbon as foaming agent on pore structure of foam glass
50. Investigation of the influence of foaming agents' type and ratio on the foaming and reactionary abilities of foamed slag glass10.13005/bbra/2242 ↗
51. Analysis of influence of foaming mixture components on structure and properties of foam glass
52. An investigation of foaming additives and usage rates in the production of ultra-light foam glass
53. Produce foam glass aggregate utilizing waste glass from cathode-ray tubes
54. Scheffler · 2006
55. Microstructure and properties of LZSA glass-ceramic foams10.1016/j.msea.2007.05.098 ↗
56. Processing, structures and compressive properties of porous glass-ceramic composites prepared from secondary by-product materials10.1016/j.ceramint.2013.02.048 ↗
57. Structure characterization and optimization of process parameters on compressive properties of glass‐based foam composites10.1002/ep.11842 ↗
58. Synthesis of foam glass-ceramic from CRT panel glass using one-step powder sintering
59. Powder sintering and gel casting methods in making glass foam using waste glass: a review on parameters, performance, and challenges10.1016/j.ceramint.2021.10.066 ↗
60. Evaluation of the contributions to the effective thermal conductivity of an open-porous-type foamed glass10.1016/j.conbuildmat.2019.04.109 ↗
61. An overview on Taguchi method
62. Osfouri, M. and A. Simon, Effect of glass particle size and foaming agent ratio on thermal and density properties of foam glass. Doktorandusz Almanach PhD Students Almanach: p. 15,.
63. A EFFECT OF DIFFERENT ADDITIVES ON METALLIC LEAD RECOVERY FROM CRT FUNNEL GLASS USING THERMAL METHOD: abstract, introduction, mathematical and experimental models, results and discussion, conclusions10.32852/iqjfmme.v20i1.453 ↗
64. Experiment on preparation of porous glass-ceramics by inorganic gel casting from coal-based slag10.1016/j.conbuildmat.2023.132222 ↗
65. Influence of the glass particle size on the foaming process and physical characteristics of foam glasses10.1016/j.jnoncrysol.2016.05.021 ↗
66. Alumina‐silica relationship in glass10.1111/j.1151-2916.1947.tb19556.x ↗
67. Effect of alumina source on the rate of melting demonstrated with nuclear waste glass batch10.1111/j.2041-1294.2012.00079.x ↗
68. Analysis of influence of foaming mixture components on structure and properties of foam glass
69. Paunescu, L., et al., The use of calcium carbonate as a foaming agent of glass waste for unconventional manufacture of a light glass foam with adequate mechanical strength. The Bulletin of the Polytechnic Institute of Iasi, Chemistry and Chemical Engineering Section. 68(72): p. 93-106,.
70. Al-Qasem · 2009
71. Influence of the glass–calcium carbonate mixture's characteristics on the foaming process and the properties of the foam glass10.1016/j.jeurceramsoc.2013.12.020 ↗
72. Mechanical properties of calcium silicate hydrates10.1617/s11527-010-9605-9 ↗
73. Study on factors affecting properties of foam glass made from waste glass10.32604/jrm.2021.012228 ↗
74. Biomineralization of calcium carbonates and their engineered applications: a review10.3389/fmicb.2013.00314 ↗
75. Controlled crystallization of hierarchical and porous calcium carbonate crystals using polypeptide type block copolymer as crystal growth modifier in a mixed solution10.1039/c0ce00202j ↗
76. The influence of process parameters on the properties of glass foam produced from industrial waste glass using SiC as the foaming agent
77. Foaming process of waste glass using CaCO3, MnO2 and water-glass as foaming agents
78. Glass foams containing fly ash sheet glass by adding calcite as foaming agent
79. Effect of carbon as foaming agent on pore structure of foam glass10.4028/www.scientific.net/AMR.105-106.765 ↗
80. Prediction of foaming temperature of glass in the presence of various oxidizers via thermodynamics route10.1016/j.ceramint.2020.07.037 ↗
81. Foam glass production from waste bottle glass using silicon cutting waste of loose abrasive slurry sawing as foaming agent10.1016/j.conbuildmat.2023.131344 ↗
82. Effect of KNO3 on the microstruture and physical properties of glass foam from solid waste glass and SiC powder10.1016/j.matlet.2015.12.076 ↗
83. Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent10.21608/ijmti.2022.97130.1038 ↗