Enhanced properties in Si3N4/Cu AMB joints through regulating interfacial reaction modes induced by Mo-particle additives
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Comparative analysis based on thermal models and device losses for the SiC-based ANPC Topologies
2. High-temperature electro-ceramics and their application to SiC power modules10.1016/j.ceramint.2017.11.140 ↗
3. Integrated common-mode filter for GaN power module with improved high-frequency EMI performance10.1109/TPEL.2023.3248092 ↗
4. Effects of metallization thickness of ceramic substrates on the reliability of power assemblies under high temperature cycling10.1016/j.microrel.2006.07.057 ↗
5. Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity10.1016/j.ceramint.2018.02.072 ↗
6. Effects of extreme temperature swings (-55 degrees c to 250 degrees c) on silicon nitride active metal brazing substrates10.1109/TDMR.2014.2320057 ↗
7. A tough silicon nitride ceramic with high thermal conductivity10.1002/adma.201102462 ↗
8. Effect of the ratio of Y2O3 and MgSiN2 sintering additives on the microstructure, thermal and mechanical properties of Si3N4 ceramics10.1016/j.ceramint.2023.08.332 ↗
9. Thermal fatigue failure mechanism in the joint of nano Cu/Ti–Si3N4 ceramic substrates after thermal fatigue test10.1016/j.ceramint.2024.01.285 ↗
10. Low-temperature bonding of Cu on Si3N4 substrate by using Ti/Cu thin films10.1016/j.matlet.2022.132330 ↗
11. Copper bonding silicon nitride substrate using atmosphere plasma spray10.1016/j.jeurceramsoc.2023.03.009 ↗
12. Direct bonding of silicon nitride to copper via laser surface modification10.1016/j.apsusc.2022.154354 ↗
13. Quasi-direct Cu-Si3N4 bonding using multi-layered active metal deposition for power-module substrate10.1016/j.matdes.2024.112637 ↗
14. Thermal-cycling-induced surface roughening and structural change of a metal layer bonded to silicon nitride by active metal brazing
15. Effect of high temperature cycling on both crack formation in ceramics and delamination of copper layers in silicon nitride active metal brazing substrates10.1016/j.ceramint.2017.01.020 ↗
16. Cyclic Thermal stress-induced degradation of Cu metallization on Si3N4 substrate at -40 degrees C to 300 degrees C10.1007/s11664-014-3357-1 ↗
17. Microstructural evolution and phase-dependent corrosion of Si3N4/316L joints using AgCuTi/Ag composite foils10.1016/j.matchar.2022.112270 ↗
18. Microstructural evolution of Si3N4/Ti6Al4V joints brazed with nano- Si3N4 reinforced AgCuTi composite filler10.1016/j.vacuum.2017.05.005 ↗
19. Nanosecond laser-induced surface modification to strengthen Cu/Si3N4 AMB joints10.1016/j.msea.2022.143573 ↗
20. Microstructure and mechanical properties of the joint between Si3N4 and Mo brazed by near-eutectic Ag-Cu-In-Ti filler alloy10.1002/adem.202300964 ↗
21. Brazing TC4 alloy to Si3N4 ceramic using nano- Si3N4 reinforced AgCu composite filler10.1016/j.matdes.2015.03.046 ↗
22. Microstructures and properties of high melting point intermetallic Ti5Si3 and TiSi2 compounds10.1016/0921-5093(92)90081-B ↗
23. Lattice parameters and thermal expansion of Ti(CxN1-x), Zr(CxN1-x), Hf(CxN1-x) and TiN1-x from 298 to 1473 K as investigated by high-temperature X-ray diffraction10.1016/0925-8388(94)90828-1 ↗
24. Microstructure and mechanical properties of Ti5Si3 fabricated by spark plasma sintering10.1016/j.jallcom.2018.11.319 ↗
25. Hardness of covalent and ionic crystals: first-principle calculations10.1103/PhysRevLett.96.085501 ↗
26. Effect of interfacial microstructure evolution on the peeling strength and fracture of silicon nitride/oxygen-free copper foil joints brazed with Ag-Cu-TiH2 filler10.1016/j.jeurceramsoc.2023.03.038 ↗
27. High resolution electron microscopy of silicon nitride-metal bonded interfaces
28. Interface nanostructure of brazed silicon nitride10.1111/j.1151-2916.1998.tb02342.x ↗
29. Nanostructure of wetting triple line in a Ag-Cu-Ti/Si3N4 reactive system10.1016/S1359-6454(98)00375-9 ↗
30. Interfacial characterization of silicon nitride/silicon nitride joints brazed using Cu-base active metal interlayers10.1016/j.ceramint.2011.11.050 ↗
31. Microstructure and strengthening mechanism of Si3N4/Invar joint brazed with TiNp-doped filler10.1016/j.msea.2015.10.038 ↗
32. The thermodynamic assessment of the Ti-Si-N system and the interfacial reaction analysis10.1016/j.jallcom.2004.09.027 ↗
33. Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu-Ti composite fillers: interfacial microstructure and formation mechanism10.1016/j.ceramint.2017.04.133 ↗
34. Microstructure, residual stress and mechanical properties of Al2O3/Nb joints vacuum-brazed with two Ag-based active fillers10.1016/j.vacuum.2018.09.028 ↗
35. Microstructural and mechanical evaluation of a Cu-based active braze alloy to join silicon nitride ceramics10.1016/j.jeurceramsoc.2010.07.022 ↗
36. Phase chemistry in the Ti-Si-N system: thermochemical review with phase stability diagrams10.1557/JMR.1994.2362 ↗
37. Influence of Ti on the mechanical properties of AgCuInTi active brazing fillers10.1002/adem.200800310 ↗
38. Brazing copper to alumina using reactive CuAgTi alloys10.1016/j.actamat.2009.10.029 ↗
39. Microstructure and mechanical properties of GH4169 superalloy and Si3N4 ceramic joints brazed with AgCuTi/Cu foam/AgCuTi composited filler10.3390/coatings12101496 ↗
40. Strength optimization of two-step-bonded Ti-6Al-4V/Si3N4 joint with Nb interlayer via transient-liquid-phase bonding and active-metal brazing10.1016/j.jeurceramsoc.2022.01.039 ↗
41. Brazing of Si3N4 ceramic to copper10.1016/S0924-0136(97)00427-5 ↗
42. Titanium metallization of Si3N4 ceramics by molten salt reaction: coating microstructure and brazing property10.1016/S0040-6090(02)00950-1 ↗
43. Interfacial microstructure and joining properties of TiAl/Si3N4 brazed joints10.1016/j.msea.2011.05.079 ↗
44. Effect of Si3N4-particles addition in Ag-Cu-Ti filler alloy on Si3N4/TiAl brazed joint10.1016/j.msea.2011.03.032 ↗
45. Relief of the residual stresses in Si3N4/Invar joints by multi-layered braze structure - experiments and simulation10.1016/j.ceramint.2016.01.096 ↗
46. Microstructure and shear strength of brazing TiAl/Si3N4 joints with Ag-Cu binary alloy as filler metal10.3390/met8110896 ↗
47. Reactive brazing of silicon nitride to Invar alloy using Ni foam and AgCuTi intermediate layers10.1016/j.ceramint.2019.04.097 ↗
48. Microstructure and mechanical properties of Si3N4 ceramic and (TiB + Y2O3)/Ti matrix composite joints brazed with AgCu/Cu foam/AgCu multilayered filler10.1016/j.jmapro.2021.04.025 ↗
49. Microstructure and shear strength of brazing high entropy TiZrHfNbMo alloy and Si3N4 ceramics joints10.3390/cryst11050472 ↗
50. Brazing Si3N4 ceramic to molybdenum using an Ag-Cu-Ti filler10.29391/2021.100.017 ↗
51. Improvements in brazed-joint properties of silicon nitride and titanium alloys using laser-induced microscale rice leaf structures10.3390/ma15196750 ↗
52. Joining Si3N4 ceramic to Invar using Mo mesh and Cu foil interlayer10.1016/j.matchemphys.2023.128732 ↗
53. Interfacial microstructure and mechanical properties of Si3N4/Invar joints using Ag-Cu-In-Ti with Cu foil as an interlayer10.1515/mt-2023-0221 ↗
54. Effects of residual stress on fracture strength of Si3N4/stainless steel joints with a Cu-interlayer10.1361/105994902770343638 ↗
55. Bonding mechanisms in silicon nitride brazing10.1111/j.1151-2916.1990.tb06552.x ↗