Mechanical and dielectric properties of Si3N4/β-SiAlON composite ceramics fabricated by vat photopolymerization 3D printing technology
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced ceramic materials synthesis · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Fibre-reinforced multifunctional SiC matrix composite materials10.1080/09506608.2016.1213939 ↗
2. Resilient Si3N4 Nanobelt Aerogel as Fire-Resistant and electromagnetic wave-transparent thermal Insulator10.1021/acsami.9b02869 ↗
3. Design of bi-modal pore structure polyarylene ether nitrile/SiO2 foams with ultralow-k dielectric and wave transparent properties by supercritical carbon dioxide10.1016/j.compositesb.2019.106915 ↗
4. In situ growth of single crystal Si3N4 nanowire foam with good wave transparency and heat insulation performance10.1016/j.compositesb.2021.109129 ↗
5. Fabrication and properties of Si2N2O-Si3N4 ceramics via direct ink writing and low-temperature sintering10.1016/j.ceramint.2021.08.088 ↗
6. Materials selection for ceramic components in automobiles
7. Hot-pressed silicon nitride ceramics with Lu2O3 additives: elastic moduli and fracture toughness10.1016/S0955-2219(02)00091-2 ↗
8. Radio-transparent ceramics: Yesterday, Today, Tomorrow10.1007/s11148-015-9731-6 ↗
9. Polymer matrix wave-transparent composites: a review10.1016/j.jmst.2020.09.017 ↗
10. Progress on high temperature nitride based ceramic wave-transparent materials
11. Nitride high temperature random material and its application progress
12. Development of silicon nitride-based ceramic radomes-A review10.1111/ijac.12305 ↗
13. Development of β-SiAlON based ceramics for radome applications10.2298/PAC1103113G ↗
14. Effect of β-SiAlON content on the sintering and bacteriostatic properties of β-SiAlON–Si3N4 composite ceramics10.1016/j.ceramint.2022.07.316 ↗
15. Porous β-SiAlON/Si3N4 ceramics prepared by reactive sintering
16. Study on porous Si3N4 ceramics prepared by pressureless sintering progress
17. Effect of BN content on the mechanical and dielectric properties of porous BNp/Si3N4 ceramics10.1016/j.ceramint.2015.08.162 ↗
18. Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting10.1016/j.ceramint.2012.11.005 ↗
19. Properties of porous Si3N4 ceramic electromagnetic wave transparent materials prepared by a technique combining freeze drying and oxidation sintering10.1007/s10854-014-1827-0 ↗
20. Precursor synthesis and mechanical properties of silicon oxynitride
21. Preparation of porous Si3N4 ceramics via tailoring solid loading of Si3N4 slurry and Si3N4 poly-hollow microsphere content10.1007/s40145-015-0158-9 ↗
22. Phase evolution and properties of novel Al2O3-based poly-hollow microsphere (PHM) ceramics10.1007/s40145-016-0187-z ↗
23. An aqueous Gelcasting route to dense β-Si4Al2O2N6–0.5SiO2 ceramics10.1111/j.1551-2916.2008.02316.x ↗
24. Near-net shape β-Si19.4Al2O2N6 parts by hydrolysis induced aqueous gel casting process”10.1111/j.1744-7402.2008.02258.x ↗
25. Absorption properties of twinned SiC nanowires reinforced Si3N4 composites fabricated by 3D -printing10.1016/j.matlet.2015.06.106 ↗
26. Si3N4-SiC composite ceramics prepared by three-dimensional printing and chemical vapor infiltration
27. Effect of chemical vapor infiltration of Si3N4 on the mechanical and dielectric properties of porous Si3N4 ceramic fabricated by a technique combining 3-D printing and pressureless sintering10.1016/j.scriptamat.2012.05.030 ↗
28. Electromagnetic interference shielding and mechanical properties of Si3N4-SiOC composites fabricated by 3D-printing combined with polymer infiltration and pyrolysis10.1557/jmr.2017.150 ↗
29. Porous (SiCw-Si3N4w)/(Si3N4-SiC) composite with enhanced mechanical performance fabricated by 3D printing10.1016/j.ceramint.2018.05.011 ↗
30. Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration10.1007/s40145-019-0322-8 ↗
31. Original Fabrication strategy of complicated Al2O3-Si3N4 functionally graded materials by stereolithography 3D printing10.1016/j.jeurceramsoc.2020.05.022 ↗
32. Preparation of Si3N4 ceramic based on digital light processing 3D printing and precursor infiltration and pyrolysis10.1111/ijac.14229 ↗
33. Photosensitive Si3N4 slurry with combined benefits of low viscosity and large cured depth for digital light processing 3D printing10.1016/j.jeurceramsoc.2022.10.056 ↗
34. Rheology and Curability characterization of photosensitive Slurries for 3D printing of Si3N4 ceramics
35. Stereolithography 3D printing of Si3N4 cellular ceramics with ultrahigh strength by using highly viscous paste10.1016/j.ceramint.2022.10.137 ↗
36. Additive Manufacturing of SiOC, SiC, and Si3N4 ceramic 3D microstructures10.1002/adem.202300639 ↗
37. Preparation of broadband transparent Si3N4-SiO2 ceramics by digital light processing (DLP) 3D printing technology10.1016/j.jeurceramsoc.2021.04.045 ↗
38. Fabrication of Si3N4-SiC/SiO2 composites using 3D printing and infiltration processing10.1016/j.ceramint.2021.06.235 ↗
39. Effect of annealing treatment on the microstructure and EMW-absorbing properties of SiCw/Si3N4 ceramics fabricated by 3D printing10.1016/j.ceramint.2022.09.084 ↗
40. Protein adsorption and in vitro behavior of additively manufactured 3D-silicon nitride scaffolds intended for bone tissue engineering10.1016/j.msec.2020.110734 ↗
41. Fused deposition modeling of Si3N4 ceramics: a cost-effective 3D-printing route for dense and high performance non-oxide ceramic materials10.1016/j.jeurceramsoc.2022.08.041 ↗
42. Direct inkjet printing of Si3N4: characterization of ink, green bodies and microstructure10.1016/j.jeurceramsoc.2008.03.004 ↗
43. Rheological properties of aqueous Si3N4 and MoSi2 suspensions Tailor-made for direct inkjet printing10.1111/j.1551-2916.2010.04052.x ↗
44. Polymer materials reinforced with silicon nitride particles for 3D printing10.1007/s11106-021-00189-2 ↗
45. Effects of particle size and color on photocuring performance of Si3N4 ceramic slurry by stereolithography10.1016/j.jeurceramsoc.2020.11.032 ↗
46. Surface modification of Si3N4 powder and its effect on digital light processing
47. Effect of solid loading of slurry on properties of Si3N4 ceramics formed by digital light processing10.15541/jim20210609 ↗
48. Fabrication of complex-shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing-based stereolithography method10.1016/j.ceramint.2018.11.116 ↗
49. Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP)10.1016/j.ceramint.2021.10.146 ↗
50. Digital light processing 3D printing of surface-oxidized Si3N4 coated by silane coupling agent10.1080/21870764.2021.2009096 ↗
51. Fabrication of broadband wave-transparent Si3N4 ceramics with octet-truss lattice structure by vat photopolymerization 3D printing technology10.1016/j.jeurceramsoc.2023.11.035 ↗
52. Oxidation mechanism study of silicon nitride
53. Analyzing the oxidation behavior of porous Si3N4 at high temperature
54. Oxidation behavior of silicon nitride powder
55. Dispersion of nano-sized γ-alumina powder in non-polar solvents10.1111/j.1551-2916.2005.00858.x ↗
56. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography10.1016/j.jeurceramsoc.2018.10.024 ↗
57. Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior10.1016/j.jeurceramsoc.2020.12.004 ↗
58. A novel synthesis approach of Si2N2O based wave-transparent ceramics combined with a gel-casting process10.1007/s10971-023-06089-8 ↗
59. High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives10.1111/ijac.13220 ↗
60. A study on the effects of liquid phase formation temperature and the content of sintering aids on the sintering of silicon nitride ceramics10.3390/cryst13071099 ↗
61. Microstructure characterization of hot-pressed β-silicon nitride containing β-Si3N4 seeds10.1016/j.matchar.2009.02.009 ↗
62. Sintering and microstructure of silicon nitride with magnesia and cerium additive10.1016/S0924-0136(01)00822-6 ↗
63. Colors in metal glasses and metallic films10.1098/rsta.1904.0024 ↗