journal article·2023-07Open access

Enhancement in electrochemical properties of boron-doped LiNi0.815Co0.15Al0.035O2 cathode

Jiatai Wang, Yuanyuan Li, Shishi Wei, Shunli Hou, Geng Zhou, Xiaocen Yan, Ruheng Xi, Xiaoyi Hou

Ceramics International· Volume 49· Issue 14

Abstract

The lattice of the cathode material LiNi 0.815 Co 0.15 Al 0.035 O 2 cathode (NCA) was doped with B 3+ using a high-temperature solid-phase method, considerably improving the electrochemical properties of the NCA. Results of X-ray diffraction analysis and Rietveld refinement show that B 3+ can enhance lattice ordering by minimising Li + /Ni 2+ mixing. The scaning electron microscopy observations indicated that the B 3+ doped changes the particle morphology . The specific discharge capacities of 1.5%B-NCA were 178.31 and 123.74 mAhg −1 at 0.2 and 5C, respectively. After 100 cycles, the specific discharge capacity was 176.29 mAhg −1 at 0.2C with a capacity retention of 98.87%. Boron doping significantly improves the structural stability of nickel-rich cathode materials by suppressing the detrimental H2→H3 phase transition, thus improving the electrochemical performance of nickel-rich ternary lithium-ion batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. LiNi0.8Co0.15Al0.05O2 cathodes exhibiting improved capacity retention and thermal stability due to a lithium iron phosphate coating10.1016/j.electacta.2019.04.153 ↗
2. TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries10.1007/s12598-020-01483-5 ↗
3. Enhancing the electrochemical performances of LiNi0.8Co0.15Al0.05O2 cathode material by anion/cation co-doping10.1007/s11581-021-03947-9 ↗
4. Significance of gallium doping for high Ni, low Co/Mn layered oxide cathode material10.1016/j.cej.2022.135821 ↗
5. The correlation between particle hardness and cycle performance of layered cathode materials for lithium-ion batteries10.1016/j.jpowsour.2020.229359 ↗
6. Degradation mechanism of Ni-enriched NCA cathode for lithium batteries: are microcracks really critical?10.1021/acsenergylett.9b00733 ↗
7. Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries10.1016/j.nanoen.2021.105854 ↗
8. Hydrothermal preparing agglomerate LiNi0.8Co0.1Mn0.1O2 cathode material with submicron primary particle for alleviating microcracks10.1016/j.jpowsour.2020.228701 ↗
9. Comparative studies of zirconium doping and coating on LiNi0.6Co0.2Mn0.2O2 cathode material at elevated temperatures10.1016/j.jpowsour.2018.06.052 ↗
10. Improved cycling performance of LiNi0.8Co0.15Al0.05O2/Al2O3 with core-shell structure synthesized by a heterogeneous nucleation-and-growth process10.1007/s11581-016-1750-x ↗
11. In situ growth of Co3O4 coating layer derived from MOFs on LiNi0.8Co0.15Al0.05O2 cathode materials10.1007/s11581-018-2726-9 ↗
12. Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2 lithium battery electrode with improved cycling performance at 55°C10.1016/j.jpowsour.2011.04.007 ↗
13. Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coating10.1016/j.jpowsour.2013.01.045 ↗
14. FeF3-coated LiNi0.8Co0.15Al0.05O2 cathode materials with improved electrochemical properties10.1016/j.matlet.2016.08.112 ↗
15. Improving the stability of LiNi0.80Co0.15Al0.05O2 by AlPO4 nanocoating for lithium-ion batteries10.1007/s11426-017-9050-6 ↗
16. The structural and electrochemical performance of Mg-doped LiNi0.85Co0.10Al0.05O2 prepared by a solid state method10.1016/j.jelechem.2019.113771 ↗
17. Enhancing the structural stability and capacity retention of Ni-rich LiNi0.7Co0.3O2 cathode materials via Ti doping for rechargeable Li-ion batteries: experimental and computational approaches10.1016/j.jallcom.2021.161559 ↗
18. Na-doped LiNi0.8Co0.15Al0.05O2 with excellent stability of both capacity and potential as cathode materials for Li-ion batteries10.1021/acsaem.8b00630 ↗
19. Enhancing the electrochemical performance of Ni-rich LiNi0.88Co0.09Al0.03O2 cathodes through tungsten-doping for lithium-ion batteries10.3390/nano12050729 ↗
20. Structure and electrochemical properties of boron-doped LiCoO210.1006/jssc.1997.7552 ↗
21. Boron doped Ni-rich LiNi0.85Co0.10Mn0.05O2 cathode materials studied by structural analysis, solid state NMR, computational modeling, and electrochemical performance10.1016/j.ensm.2021.08.005 ↗
22. Enhancing high rate performance and cyclability of LiFePO4 cathode materials for lithium ion batteries by boron doping10.1016/j.jallcom.2021.160560 ↗
23. Enhancing electrochemical performance and structural stability of LiNi0.5Mn1.5O4 cathode material for rechargeable lithium-ion batteries by boron doping10.1016/j.ceramint.2020.08.125 ↗
24. Communication—improvement of structural stability during high-voltage cycling in high-nickel cathode materials with B2O3Addition10.1149/2.1011605jes ↗
25. Boron-doped Li1.2Mn0.6Ni0.2O2 as a cathode active material for lithium ion battery10.1016/j.ssi.2015.09.008 ↗
26. Structure and electrochemical performance modulation of a LiNi0.8Co0.1Mn0.1O2 cathode material by anion and cation co-doping for lithium ion batteries10.1039/C9RA07873H ↗
27. Characteristics of LiMO2 (M=Co, Ni, Ni0.2Co0.8, Ni0.8Co0.2) powders prepared from solution of their acetates10.1016/j.jallcom.2005.12.129 ↗
28. LiNi0.8Co0.15Al0.05O2: enhanced electrochemical performance from reduced cationic disordering in Li slab10.1038/s41598-017-01657-9 ↗
29. New insights into improving rate performance of lithium-rich cathode material10.1002/adma.201500956 ↗
30. Structure and electrochemistry of B doped Li(Li0.2Ni0.13Co0.13Mn0.54)1-xBxO2 as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2016.07.064 ↗
31. Improved rate capability of Li-rich cathode materials by building a Li+-Conductive LixBPO4+x/2 nanolayer from residual Li2CO3 on the surface10.1002/celc.201700157 ↗
32. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
33. The role of a MnO2 functional layer on the surface of Ni-rich cathode materials: towards enhanced chemical stability on exposure to air10.1016/j.ceramint.2018.04.166 ↗
34. Enhanced electrochemical properties of a LiNiO2-based cathode material by removing lithium residues with (NH4)2HPO410.1039/C4TA01282H ↗
35. Ultrathin ZrO2 on LiNi0.5Mn0.3Co0.2O2 electrode surface via atomic layer deposition for high-voltage operation in lithium-ion batteries10.1016/j.apsusc.2019.04.123 ↗
36. A novel method for preparation of macroposous lithium nickel manganese oxygen as cathode material for lithium ion batteries10.1016/j.electacta.2010.12.108 ↗