Formation of eutectic structure in dense Al2O3-YAG composite by electric field treatment
Source abstract
Abstract
Abstract The microstructural evolution of dense Al2O3–Y3Al5O12 (YAG) composites exposed to an electric field treatment has been investigated. In particular, the transformation of the initially homogenous composite structure into three different regions has been observed, including (1) the composite structure region, (2) the eutectic region, and (3) the segregation region. In addition, pores and holes have been introduced into a dense structure of the sample after the electric field treatment. The observed phenomena have been interpreted in terms of the electromigration mechanism induced by the high electric field, rather than the melting caused by the Joule heating of the composites. The results indicate the potential of electric field treatment as a new post-processing method to optimize microstructure and properties during ceramic manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Manipulation of matter by electric and magnetic fields: toward novel synthesis and processing routes of inorganic materials10.1016/j.mattod.2018.03.026 ↗
2. Flash sintering of yttria-stabilized zirconia: Fundamental understanding and applications10.1016/j.scriptamat.2020.06.040 ↗
3. A review of electromagnetic processing of materials (EPM): heating, sintering, joining and forming10.1016/j.jmst.2020.06.049 ↗
4. Flash sintering of nanograin zirconia in < 5 s at 850 oC10.1111/j.1551-2916.2010.04089.x ↗
5. Ultrafast synthesis of entropy-stabilized oxide at room temperature10.1016/j.jeurceramsoc.2020.01.018 ↗
6. Ultrafast synthesis and sintering of materials in a single running experiment approach by using electric fields10.1007/s40145-018-0313-1 ↗
7. Fabrication and electrical characteristics of flash-sintered SiO2-doped ZnO-Bi2O3-MnO2 varistors10.1007/s40145-020-0404-7 ↗
8. Reversible flash-bonding of zirconia and nickel alloys10.1016/j.scriptamat.2018.04.047 ↗
9. Low temperature and high strain rate superplastic flow in structural ceramics induced by strong electric-field10.1016/j.scriptamat.2017.11.042 ↗
10. The effects of external fields in ceramic sintering10.1111/jace.16061 ↗
11. The microstructural origin of rapid densification in 3YSZ during ultra-fast firing with or without an electric field10.1016/j.jeurceramsoc.2020.07.027 ↗
12. Joule heating during flash-sintering10.1016/j.jeurceramsoc.2012.02.030 ↗
13. Incubation time for flash sintering as caused by internal reactions, exemplified for yttria stabilized zirconia10.1016/j.actamat.2019.06.030 ↗
14. Investigation of electrochemical, optical and thermal effects during flash sintering of 8YSZ10.3390/ma11071214 ↗
15. Asymmetric temperature distribution during steady stage of flash sintering dense zirconia10.1016/j.jeurceramsoc.2018.02.012 ↗
16. Enhanced grain boundary mobility in yttria-stabilized cubic zirconia under an electric current10.1111/j.1551-2916.2011.04800.x ↗
17. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO-Bi2O3 under direct currents10.1016/j.actamat.2015.04.018 ↗
18. Grain growth in weak electric fields in strontium titanate: grain growth acceleration by defect redistribution10.1016/j.jeurceramsoc.2016.04.033 ↗
19. Electrical and hydrogen reduction enhances kinetics in doped zirconia and ceria: I. grain growth study10.1111/jace.14615 ↗
20. The effect of electric fields on grain growth in MgAl2O4 spinel10.1016/j.jeurceramsoc.2018.08.030 ↗
21. Current-induced abnormal and oriented grain growth in corundum upon flash sintering10.1016/j.scriptamat.2018.03.004 ↗
22. Inhomogeneous reduction and its relation to grain growth of titania during flash sintering10.1016/j.scriptamat.2018.06.017 ↗
23. In situ measurement of temperature and reduction of rutile titania using energy dispersive x-ray diffraction10.1016/j.jeurceramsoc.2018.08.032 ↗
24. In-situ measurements of lattice expansion related to defect generation during flash sintering10.1111/jace.15071 ↗
25. Electric field induced texture in titania during experiments related to flash sintering10.1016/j.jeurceramsoc.2015.09.002 ↗
26. Blue photo luminescence from 3 mol%Y2O3-doped ZrO2 polycrystals sintered by flash sintering under an alternating current electric field10.1016/j.jeurceramsoc.2019.12.060 ↗
27. The role of point defects and defect gradients in flash sintering of perovskite oxides10.1016/j.actamat.2018.12.007 ↗
28. Key microstructural characteristics in flash sintered 3YSZ critical for enhanced sintering process10.1016/j.ceramint.2018.10.007 ↗
29. Comparison of the grain growth behavior and defect structures of flash sintered ZnO with and without controlled current ramp10.1016/j.scriptamat.2018.11.009 ↗
30. Correlations of grain boundary segregation to sintering techniques in a three-phase ceramic10.1016/j.mtla.2020.100890 ↗
31. Effect of holding time on the microstructure and properties of flash-sintered Y2O3-doped ZrO210.1016/j.ceramint.2016.08.048 ↗
32. Phase transformation in the alumina-titania system during flash sintering experiments10.1016/j.jeurceramsoc.2015.10.006 ↗
33. Reactive flash sintering: MgO and alpha-Al2O3 transform and sinter into single-phase polycrystals of MgAl2O410.1111/jace.15974 ↗
34. α-Alumina and spinel react into single-phase high-alumina spinel in < 3 seconds during flash sintering10.1111/jace.15927 ↗
35. Ultrafast formation of Al2O3-Y3Al5O12 eutectic ceramic by flash sintering10.1111/jace.17109 ↗
36. Impedance spectroscopy and dielectric properties of flash versus conventionally sintered yttria-doped zirconia electroceramics viewed at the microstructural level10.1111/jace.12567 ↗
37. Electromechanical properties of flash sintered BNT-based piezoelectric ceramic10.1016/j.jeurceramsoc.2019.03.050 ↗
38. Microstructure and dielectric property of flash sintered SiO2-coated BaTiO3 ceramics10.1016/j.scriptamat.2019.05.019 ↗
39. Electronic conductivity in yttria-stabilized zirconia under a small dc bias10.1021/cm503957x ↗
40. Correlations between conductivity, electroluminescence and flash sintering10.1016/j.scriptamat.2016.03.001 ↗
41. Influence of flash sintering on the ionic conductivity of 8 mol% yttria stabilized zirconia10.1016/j.jeurceramsoc.2018.12.048 ↗
42. On the synchronicity of flash sintering and phase transformation10.1111/jace.16335 ↗
43. Effect of oscillatory pressure on the sintering behavior of ZrO2 ceramic10.1016/j.ceramint.2020.02.100 ↗
44. Preparation of Al2O3-Y3Al5O12-ZrO2 eutectic ceramic by flash sintering10.1016/j.scriptamat.2015.12.002 ↗
45. Reaction assisted flash sintering of Al2O3-YAG ceramic composites with eutectic composition10.1016/j.ceramint.2019.03.196 ↗
46. Sintering densification and microstructure formation of bulk Al2O3/YAG eutectic ceramics by hot pressing based on fine eutectic structure10.1016/j.matdes.2015.12.017 ↗
47. Directionally solidified eutectic ceramic oxides10.1016/j.pmatsci.2005.10.002 ↗
48. Temperature gradient and microstructure evolution in AC flash sintering of 3 mol% yttria-stabilized zirconia10.1080/10426914.2016.1232814 ↗
49. Electroluminescence and the measurement of temperature during Stage III of flash sintering experiments10.1016/j.jeurceramsoc.2015.03.040 ↗
50. Broadening of diffraction peak widths and temperature nonuniformity during flash experiments10.1111/jace.14326 ↗
51. Effect of boundary conditions on reduction during early stage flash sintering of YSZ10.1016/j.actamat.2019.05.001 ↗
52. Field assisted sintering of ceramic constituted by alumina and yttria stabilized zirconia10.1016/j.jeurceramsoc.2014.02.042 ↗
53. Flash sintering incubation in Al2O3/TZP composites10.1016/j.jeurceramsoc.2015.02.033 ↗
54. Field assisted sintering of nanostructured zirconia-alumina ceramics for demanding applications10.1080/0371750X.2016.1172981 ↗
55. Flash sintering of 3YSZ/Al2O3-platelet composites10.1111/jace.16929 ↗
56. Flash sintering in well-dispersed insulator-ionic conductor composites: the case of diphasic alumina-zirconia (Al2O3-3YSZ) system10.1016/j.scriptamat.2019.09.004 ↗
57. Microstructural analysis of ZrO2/Al2O3 composite: flash and conventional sintering10.1016/j.ceramint.2019.09.241 ↗
58. In-situ observation of oxygen mobility and abnormal lattice expansion in ceria during flash sintering10.1016/j.ceramint.2018.05.186 ↗
59. Measurement of O and Ti atom displacements in TiO2 during flash sintering experiments10.1111/jace.15375 ↗
60. Fabrication of high-entropy perovskite oxide by reactive flash sintering10.1016/j.ceramint.2020.04.060 ↗
61. Electromigration effect in Fe-Al diffusion couples with field-assisted sintering10.1016/j.actamat.2020.01.008 ↗
62. From conventional ac flash-sintering of YSZ to hyper-flash and double flash10.1016/j.jeurceramsoc.2013.03.019 ↗
63. Field-assisted sintering of undoped BaTiO3: microstructure evolution and dielectric permittivity10.1016/j.jeurceramsoc.2014.04.041 ↗
64. Enhancement of sintering rates in BaTiO3 by controlling of DC electric current10.2109/jcersj2.123.465 ↗
65. Flash sintering of ceramics10.1016/j.jeurceramsoc.2018.08.048 ↗
66. Nanovoids in dense hydroxyapatite ceramics after electric field assisted sintering10.1080/17436753.2018.1452662 ↗
67. Ionomigration of pores and gas bubbles in yttria-stabilized cubic zirconia10.1111/jace.12233 ↗
68. Flash sintering of yttria-stabilized zirconia/graphene nano-platelets composite10.1016/j.ceramint.2020.06.008 ↗
69. Ambient flash sintering of reduced graphene oxide/zirconia composites: role of reduced graphene oxide10.1016/j.jmst.2020.04.051 ↗
70. Electric current activated sintering (ECAS) of undoped and titanium-doped BiFeO3 bulk ceramics with homogeneous microstructure10.1016/j.jeurceramsoc.2019.01.045 ↗
71. Flash sintering using controlled current ramp10.1016/j.jeurceramsoc.2018.04.003 ↗