Preparation of 99.6 % alumina ceramic substrates with high thermal conductivity by tape casting and warm pressing process
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Spatial atomic layer deposition of nitrogen-doped alumina thin films for high-performance perovskite solar cell encapsulation10.1016/j.nanoen.2024.109782 ↗
2. pH-dependent growth of alumina nanorods with a high aspect ratio for enhanced propane dehydrogenation performance10.1016/j.cej.2024.153039 ↗
3. Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores10.1007/s40145-020-0362-0 ↗
4. Wettability and mechanical properties of red mud–Al2O3 composites10.3390/ma17051095 ↗
5. One-step synthesis and low-temperature rapid sintering of alumina-zirconia ceramics by flash sintering combined with phase transformation10.1016/j.matchar.2024.113771 ↗
6. Sintering behavior and properties of lithium stabilized sodium β'' - alumina ceramics with YSZ addition10.1016/j.ceramint.2018.12.165 ↗
7. Coupling additive manufacturing and microwave sintering: a fast processing route of alumina ceramics10.1016/j.jeurceramsoc.2019.11.009 ↗
8. Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping10.1016/j.jeurceramsoc.2011.07.004 ↗
9. Enhanced properties of pure alumina ceramics by oscillatory pressure sintering10.1016/j.ceramint.2017.12.133 ↗
10. Densification and grain growth of Gd2Zr2O7 nanoceramics during pressureless sintering10.1016/j.jeurceramsoc.2016.09.019 ↗
11. Slip casting and pressureless sintering of Ti3AlC210.1007/s40145-019-0318-4 ↗
12. Densification process of a 95% alumina ceramic during the intermediate stage of sintering in air, and O210.1016/j.ceramint.2023.07.223 ↗
13. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology10.1016/j.ceramint.2016.03.079 ↗
14. Sintering kinetics of α-Al2O3 powder10.1016/S0272-8842(99)00008-5 ↗
15. Hot-press sintering of aluminum nitride nanoceramics
16. Fabrication of fine-grained undoped Y2O3 transparent ceramic using nitrate pyrogenation synthesized nanopowders10.1016/j.ceramint.2018.11.232 ↗
17. Additive manufacturing of ceramic nanopowder by direct coagulation printing
18. Effect of initial particle size on grain microstructure of textured ferroelectric ceramics: a phase-field method and brush technique10.1016/j.jeurceramsoc.2022.05.050 ↗
19. Role of immiscible and miscible second phases on the sintering kinetics and microstructural development of nano-crystalline α-Al2O3-based materials10.1016/j.ceramint.2011.06.011 ↗
20. Pushing the grain size limit of pressureless-sintered alumina nanocrystalline ceramics by non-oxidizing atmospheres10.1016/j.actamat.2024.120166 ↗
21. Grain growth during capsule-free hot isostatic pressing10.1016/j.ceramint.2022.05.248 ↗
22. Weakly agglomerated α-Al2O3 nanopowders prepared by a novel spray precipitation method10.1016/j.ceramint.2018.03.188 ↗
23. A review on aqueous gelcasting: a versatile and low-toxic technique to shape ceramics10.1016/j.ceramint.2018.12.079 ↗
24. Densification, microstructure and optical properties of YAG transparent ceramics prepared by dry-pressing and gelcasting10.1016/j.optmat.2021.111509 ↗
25. Impact of lamination conditions on microtubular solid oxide fuel cells fabricated by tape casting coupled with isostatic pressing10.1016/j.jpowsour.2022.231369 ↗
26. Low-pressure injection molding and SHS-HIP without envelope of AlN–TiB2 ceramic slender tube with blind hole10.1016/j.matdes.2004.07.011 ↗
27. Manufacturing of ceramic cores: from hot injection to 3D printing10.1016/j.jmst.2022.06.033 ↗
28. Influence of slurry characteristics on the morphology of spray-dried alumina powders10.1016/S0955-2219(02)00171-1 ↗
29. Manufacturing technologies for nanocomposite ceramic structural materials and coatings10.1016/j.mseb.2007.09.066 ↗
30. Preparation of high-density Si3N4 by a gas-pressure sintering process10.1111/j.1151-2916.1981.tb15895.x ↗
31. Thermo-mechanical and high-temperature dielectric properties of cordierite-mullite-alumina ceramics10.1016/j.ceramint.2016.07.188 ↗
32. Fabrication of thin ceramic sheets for capacitors10.1111/j.1151-2916.1947.tb18889.x ↗
33. Effects of tape thickness on the fabrication and performance of microtubular solid oxide fuel cells manufactured by tape casting10.1016/j.ijhydene.2024.02.071 ↗
34. Al2O3 dielectric ceramic tapes containing hBN for applications on high-frequency substrates10.1016/j.ceramint.2023.11.011 ↗
35. Improved non-linear behaviour of ZnO-based varistor thick films prepared by tape casting and screen printing10.1016/j.jeurceramsoc.2007.02.057 ↗
36. Surface modification of alumina nanoparticles and its application in tape casting of micro-nano green tape10.1016/j.apsusc.2023.156963 ↗
37. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
38. D03-ordered Fe3Al magnetic nanopowders synthesized by low oxygen induction thermal plasma10.1016/j.jallcom.2023.173277 ↗
39. Dynamic compaction of nickel nanopowders: experiment and MD simulation using the laser shock method, Powder
40. Superhydrophobic surfaces fabricated by surface modification of alumina particles10.1016/j.apsusc.2012.07.009 ↗
41. Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism10.1016/j.ceramint.2021.05.091 ↗
42. Pressureless sintering of highly transparent aluminum oxynitride ceramic by precipitation-coating with sintering aid10.1016/j.jeurceramsoc.2022.11.055 ↗
43. Tape casting of alumina in water with an acrylic latex binder10.1016/S0955-2219(96)00143-4 ↗
44. Lamination and sintering behavior of tape cast, transparent Mg-Al-spinel ceramics10.1016/j.ceramint.2014.11.063 ↗
45. Densification and grain growth of porous alumina compacts10.1111/j.1151-2916.1994.tb04561.x ↗
46. Densification and grain growth in pulse electric current sintering of alumina10.1016/j.jeurceramsoc.2003.10.013 ↗
47. Pore growth during initial and intermediate stages of sintering in ZrO2–3 mol% Y2O3 compact: a small-angle neutron scattering investigation10.1016/S0925-8388(03)00440-7 ↗
48. Two-stage master sintering curve applied to two-step sintering of oxide ceramics10.1016/j.jeurceramsoc.2013.01.020 ↗
49. Zero sintering-induced shrinkage of porous oxide ceramics10.1016/j.jmst.2023.02.048 ↗
50. Effects of HfN content and metallic additives on the microstructure and mechanical properties of TiC0.7N0.3-based ceramic tool materials10.1016/j.jallcom.2018.04.213 ↗
51. Unveiling exceptional sinterability of ultrafine α-Al2O3 nanopowders10.1016/j.jmat.2020.12.011 ↗
52. Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3 thin films grown on super smooth glazed-Al2O3 ceramics substrate10.1016/j.apsusc.2011.09.117 ↗
53. Analysis of the heat transfer and anti-corrosion performance of an aluminum nitride porous ceramic skeleton with controllable preparation10.1016/j.applthermaleng.2024.122687 ↗