Effect of notch depth on fracture toughness of zirconia ceramics tested by SEVNB method
Source abstract
Abstract
Abstract Ultra sharp V-notches with different depth to width ratio (a/w) were prefabricated on test bars by diamond wheel and femtosecond laser to measure the fracture toughness of 1.5Y/3Ca/6.5Al/1.5Si-PSZ, 2.5Y-TZP, 3Y-TZP and 8Y-FSZ ceramics by single-edge V-notched beam (SEVNB) method. For comparison, the fracture toughness of Al2O3 ceramics was also determined. Based on the analyses of SEM and XRD, the different microstructures and phase transformability led the plateau fracture toughness values of the investigated samples to vary from 1.6 to 9.4 MPa m1/2. The relationship between the a/w value and the plateau fracture toughness has been established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Influence of a finite notch root radius on fracture toughness10.1016/j.jeurceramsoc.2004.01.010 ↗
2. Notch effects in determination of fracture toughness and compliance10.1007/BF00042831 ↗
3. Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results10.1016/j.dental.2007.06.021 ↗
4. Effect of notch-root radius on the fracture toughness of a fine-grained alumina10.1111/j.1151-2916.1994.tb07038.x ↗
5. A new method for the preparation of ultra-sharp V-notches to measure fracture toughness in ceramics10.1016/j.jeurceramsoc.2014.05.021 ↗
6. Fracture toughness of zirconia from a shallow notch produced by ultra-short pulsed laser ablation10.1016/j.jeurceramsoc.2014.05.009 ↗
7. Assessment in Si3N4 of a new method for determining the fracture toughness from a surface notch micro-machined by ultra-short pulsed laser ablation10.1016/j.jeurceramsoc.2014.12.024 ↗
8. Effect of molten zone ablated by femtosecond lasers on fracture toughness of Si3N4 measured by SEVNB method10.1016/j.jeurceramsoc.2017.10.007 ↗
9. Effect of molten zone ablated by femtosecond laser on fracture toughness of oxide ceramics10.1016/j.jeurceramsoc.2017.12.049 ↗
10. Mechanical properties of 12Ce–ZrO2/3Y–ZrO2 composites10.1016/j.ceramint.2015.08.044 ↗
11. The influence of unshielded small cracks in the fracture toughness of yttria and of ceria stabilised zirconia10.1016/j.jeurceramsoc.2015.09.017 ↗
12. Accurate measurement of fracture toughness in structural ceramics10.1016/j.jeurceramsoc.2017.05.027 ↗
13. Effect of notch depth on fracture toughness of Y-TZP and determination of its actual value10.1016/j.ceramint.2014.08.130 ↗
14. Determination of fracture toughness of Y-TZP ceramics10.1016/j.ceramint.2017.09.004 ↗
15. Determination of fracture toughness of zirconia ceramics with different yttria concentrations by SEVNB method10.1016/j.ceramint.2017.04.064 ↗
16. Load-deflection behavior of fracture toughness testing of ceramics by SEVNB method
17. Wide range stress intensity factor expressions for ASTM E 399 standard fracture toughness specimens10.1007/BF00032844 ↗
18. Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by X-Ray diffraction10.1111/j.1151-2916.1984.tb19614.x ↗
19. Mechanics of transformation-toughening in brittle materials10.1111/j.1151-2916.1982.tb10426.x ↗
20. X-Ray determination of transformation depths in ceramics containing tetragonal ZrO210.1111/j.1151-2916.1981.tb10285.x ↗
21. Crack-interface grain bridging as a fracture resistance I, Mechanism in ceramics: I, Experimental study on alumina10.1111/j.1151-2916.1987.tb04982.x ↗
22. Crack-interface grain bridging as a fracture resistance mechanism in ceramics: II, Theoretical fracture mechanics model10.1111/j.1151-2916.1987.tb04983.x ↗
23. Evaluation of fracture toughness for ceramic materials by a single-edge-precracked-beam method10.1111/j.1151-2916.1988.tb05049.x ↗