Silica-based geopolymers admixture of borosilicate waste glasses: A green material for gamma radiation shielding applications

The gamma shielding parameters of an admixture of waste borosilicate glass (BS) and geopolymer (GP) made from activated metakaolin are presented in the present study. The influence of the BS quantity on the density and different gamma shielding quantities is investigated over a wide gamma energy range. Four batches of the G-BS composite were prepared using the solid-state diffusion method, containing 0 (G), 10 % (G-10BS), 20 % (G20BS), and 30 % (G-30BS) by weight of BS, respectively. The chemical compositions of the G-xBS samples were determined through X-ray fluorescence spectrometry. In addition, the density of the BS-doped geopolymers was determined using the liquid displacement method using deionized water as the displacement fluid. The theoretical determination of estimating shielding parameters began by estimating the mass (μ/ρ) and linear (μ) attenuation coefficients of the geopolymers for photon energies in the range of 15 keV to 15 MeV using the XCOM data library. The B and Si content and density of the geopolymer samples increased as the BS weight proportion increased in the geopolymer. The values of the attenuation coefficients (ACs) decreased with energy. For μ, the decrease was from 9.1533 to 0.0355 cm− 1 , 6.7486 to 0.0374 cm− 1 , 10.2964 to 0.0396 cm− 1 , and 10.7722 to 0.0414 cm− 1, while for μ/ρ, it was 5.3217 to 0.0206 cm2 g-1, 5.3860 to 0.0206 cm2 g-1, 5.3627 to 0.0206 cm2 g-1, and 5.3594 to 0.0206 cm2 g-1, for G, G-10BS, G-20BS, and G-30BS, respectively. There are no significant differences between the photon energy absorption capacity of the geopolymers, especially at energies greater than 1 MeV. The photon buildup factors of the G-xBS samples have very close relative values with no clear order. The introduction of waste borosilicate glass is therefore a way of improving the photon attenuation capacity of geopolymer and, therefore, the potential of shielding applications of geopolymer-based concrete.