Effect of alkaline oxides (CaO and MgO) on the mechanical properties of SiC-based foam ceramics
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Fabrication and characterization of a mullite-foamed ceramic reinforced by in-situ SiC whiskers10.1016/j.ceramint.2019.10.016 ↗
2. Micromechanical properties of vapour-exposed SiCf/BN/SiC ceramic-matrix composites10.1016/j.jeurceramsoc.2022.02.022 ↗
3. Oxidation of SiC/BN/SiC ceramic matrix composites in dry and wet oxygen at intermediate temperatures10.1016/j.jeurceramsoc.2022.04.003 ↗
4. Design of three-layered struts in SiC reticulated porous ceramics for porous burner10.1016/j.ceramint.2019.01.175 ↗
5. Effect of Al4SiC4 additive on the fabrication and characterization of recrystallized SiC honeycomb ceramics10.1016/j.ceramint.2019.05.201 ↗
6. Effect of impregnated phenolic resin on the properties of Si–SiC ceramic matrix composites fabricated by SLS-RMI10.1016/j.ceramint.2022.06.324 ↗
7. Accelerated formation of methane hydrates in the porous SiC foam ceramic packed reactor10.1016/j.fuel.2019.115858 ↗
8. Crystallization behavior of polymer-derived Si-O-C for ceramic matrix composite processing10.1016/j.actamat.2018.01.052 ↗
9. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
10. Development and evaluation of sub-element testing of SiC/SiC ceramic matrix composites at elevated temperatures10.1016/j.jeurceramsoc.2020.07.038 ↗
11. Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology10.1016/j.jeurceramsoc.2019.04.043 ↗
12. Development of a silicon carbide ceramic based counter-flow heat exchanger by binder jetting and liquid silicon infiltration for concentrating solar power10.1016/j.ceramint.2022.04.269 ↗
13. Realizing high ceramic yield and low shrinkage of in-situ formed lightweight 3D-SiC(rGO)px polymer-derived ceramics with excellent fracture toughness10.1016/j.ceramint.2020.07.229 ↗
14. Recent advances and challenges in silicon carbide (SiC) ceramic nanoarchitectures and their applications, Mater
15. Synthesis of dense silicon-based ceramics at low temperatures10.1038/355714a0 ↗
16. Effect of SiO2, Al2O3 and CaO on characteristics of lightweight aggregates produced from MSWI bottom ash sludge (MSWI-BAS)10.1016/j.conbuildmat.2019.01.104 ↗
17. Bauxite residue (red mud) as a pulverised fuel ash substitute in the manufacture of lightweight aggregate10.1016/j.jclepro.2015.09.024 ↗
18. Low-temperature sintering of a porous SiC ceramic filter using water glass and zirconia as sintering aids10.1016/j.ceramint.2021.06.020 ↗
19. Reaction-bonded robust SiC ceramic membranes sintered at low temperature with coal gangue10.1016/j.ceramint.2023.03.097 ↗
20. Lower-temperature preparation of SiC ceramic membrane using zeolite residue as sintering aid for oil-in-water separation10.1016/j.memsci.2020.118238 ↗
21. Creating hierarchies promptly: microwave-accelerated synthesis of ZSM-5 zeolites on macrocellular silicon carbide (SiC) foams10.1016/j.cej.2016.11.116 ↗
22. Fabrication of SiC foam ceramics at a low sintering temperature by adding fly ash10.1016/j.ceramint.2022.06.326 ↗
23. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate10.1016/j.conbuildmat.2009.08.008 ↗
24. High strength fiber reinforced one-part alkali activated slag/fly ash binders with ceramic aggregates: microscopic analysis, mechanical properties, drying shrinkage, and freeze-thaw resistance10.1016/j.conbuildmat.2020.118129 ↗
25. Effect of waste glass addition on lightweight aggregates prepared from F-class coal fly ash10.1016/j.conbuildmat.2016.02.147 ↗
26. The properties of fly ash derived lightweight aggregates obtained using microwave radiation10.1016/j.conbuildmat.2019.116677 ↗
27. Novel glass ceramic foams materials based on polishing porcelain waste using the carbon ash waste as foaming agent10.1016/j.conbuildmat.2016.08.134 ↗
28. Lightweight aggregates produced by granulation of peat-wood fly ash with alkali activator10.1016/j.minpro.2016.02.006 ↗
29. Mechanical properties of oil palm waste lightweight aggregate concrete with fly ash as fine aggregate replacement
30. Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete10.1016/j.jclepro.2015.07.001 ↗
31. Microstructural and morphological evolution of fly ash based geopolymers10.1016/j.conbuildmat.2016.02.106 ↗
32. Synthesis of a foam ceramic based on ceramic tile polishing waste using SiC as foaming agent10.1016/j.ceramint.2018.02.211 ↗
33. Novel optical surface properties of Ca2+-doped MgO nanocrystals10.1021/nl0511418 ↗
34. Modelling and optimizing the liquid phase sintering of alumina/CaO–SiO2–Al2O3 ceramics using response surface methodology10.1016/j.ceramint.2020.09.153 ↗
35. Effect of the CaO content and decomposition of calcium-containing minerals on properties and microstructure of ceramic foams from fly ash10.1016/j.ceramint.2017.04.122 ↗
36. Bauxite residue (red mud) as a pulverised fuel ash substitute in the manufacture of lightweight aggregate10.1016/j.jclepro.2015.09.024 ↗
37. Using CaO as a modifier agent to optimize the pore structure of foamed ceramics from granite scrap
38. Liquid-phase sintering of SiC in presence of CaO10.1016/j.ceramint.2003.07.017 ↗
39. Low-temperature hot-press sintering of AlN ceramics with MgO–CaO–Al2O3–SiO2 glass additives for ceramic heater applications10.1016/j.ceramint.2022.05.284 ↗
40. High-porosity mullite ceramic foams prepared by selective laser sintering using fly ash hollow spheres as raw materials10.1016/j.jeurceramsoc.2018.05.031 ↗
41. Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology10.1016/j.jeurceramsoc.2021.06.012 ↗
42. Effects of SiO2/CaO ratio on viscosity, structure, and mechanical properties of blast furnace slag glass ceramics10.1016/j.matchemphys.2019.05.065 ↗
43. Mechanical behavior of cordierite and cordierite–mullite materials evaluated by indentation techniques10.1016/S0955-2219(00)00334-4 ↗