Influence of BaO and MgO on viscosity, crystalline phase, and structure of CaO–Al2O3–10%SiO2–20%CaF2-based system
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Kinetic analysis of alumina change in mold slag for high aluminum steel during continuous casting10.1007/s11663-011-9600-8 ↗
2. Effect of Al content on the reaction between Fe-10Mn-xAl (x = 0.035wt%, 0.5wt%, 1wt%, and 2wt%) steel and CaO-SiO2-Al2O3-MgO slag10.1007/s12613-021-2298-y ↗
3. Effect of CaF2 and CaO/Al2O3 on viscosity and structure of TiO2-bearing slag for electroslag remelting10.1007/s42243-021-00683-2 ↗
4. A comparison study on interfacial properties of fluorine-bearing and fluorine-free mold flux for casting advanced high-strength steels10.1007/s42243-021-00714-y ↗
5. Effect of Al2O3/Na2O ratio and MnO on high-temperature properties of mold flux for casting peritectic steel10.1007/s42243-021-00712-0 ↗
6. Effect of CaO/SiO2 mass ratio and Li2O on structure and phase precipitation behaviors of CaO-SiO2-MgO-Al2O3 oxide inclusions10.1016/j.jnoncrysol.2022.121911 ↗
7. Effect of CaF2 and Li2O on structure and viscosity of low-fluoride slag for electroslag remelting of rotor steel10.1016/j.jnoncrysol.2022.121914 ↗
8. Viscosity and structure evolution of molten vanadium slag during carbothermic reduction process10.1016/j.jnoncrysol.2022.121840 ↗
9. Effect of Al2O3 content on the viscosity and structure of CaO-SiO2-Cr2O3-Al2O3 slags10.1007/s12613-021-2306-2 ↗
10. Effect of Al2O3 and MgO on crystallization and structure of CaO-SiO2-B2O3-based fluorine-free mold flux10.1007/s42243-020-00439-4 ↗
11. Influence of Cr2O3 content on viscosity and rheological behavior of Cr2O3-containing slags10.1007/s42243-021-00679-y ↗
12. Effect of CaO/Al2O3 on structure, viscosity, and surface tension of electroslag remelting-type CeO2-bearing slag10.1007/s42243-022-00844-x ↗
13. Control of stringer shaped non‐metallic inclusions of CaO-Al2O3 system in API X80 linepipe steel plates10.1002/srin.201300044 ↗
14. Relationship between molten oxide structure and thermal conductivity in the CaO-SiO2-B2O3 system10.2355/isijinternational.54.2077 ↗
15. Effect of Al2O3 on the viscosity of CaO-SiO2-Al2O3-MgO-Cr2O3 slags10.1007/s12613-020-2187-9 ↗
16. Properties and structure of a new non-reactive mold flux for high-Al steel10.1007/s42243-021-00708-w ↗
17. Effect of MgO on physicochemical properties of non-reactive mold fluxes used for high Al steel
18. Experimental measurements and modelling of viscosity in CaO-Al2O3-MgO slag system10.1179/1743281210Y.0000000014 ↗
19. Effect of alkaline earth metal oxides on the viscosity and structure of the CaO-Al2O3 based mold flux for casting high-Al steels10.1016/j.jnoncrysol.2017.07.029 ↗
20. Effect of substituting CaO with BaO and CaO/Al2O3 ratio on the viscosity of CaO-BaO-Al2O3-CaF2-Li2O mold flux system10.3390/met9020142 ↗
21. Effects of MgO and BaO on the melting and crystallization behaviors of the mold flux in CaO-Al2O3 series
22. Effects of B2O3 and BaO on the crystallization behavior of CaO-Al2O3-Based mold flux for casting high-Al steels10.1007/s11663-014-0286-6 ↗
23. Effects of fluorine and BaO on the crystallization behavior of lime–alumina-based mold flux for casting high-Al steels10.1007/s11663-014-0285-7 ↗
24. Wang · 2010
25. Heat transfer across mold flux film in mold during initial solidification in continuous casting of steel10.2355/isijinternational.38.834 ↗
26. Effect of Na2O on crystallisation behaviour and heat transfer of high Al steel mould fluxes10.1179/1743281211Y.0000000011 ↗
27. Influence of substituting B2O3 with Li2O on the viscosity, structure and crystalline phase of low-reactivity mold flux10.1007/s12613-023-2621-x ↗
28. Estimation of the viscosities of binary metallic melts using Gibbs energies of mixing10.1007/BF02650079 ↗
29. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
30. Ca-Mg mixing in aluminosilicate glasses: an investigation using 17O MAS and 3QMAS and 27Al MAS NMR10.1016/j.jnoncrysol.2008.05.049 ↗
31. Cormier · 2021 · 496
32. Non-stoichiometric non-bridging oxygens and five-coordinated aluminum in alkaline earth aluminosilicate glasses: effect of modifier cation size10.1016/j.jnoncrysol.2012.05.022 ↗
33. Atomistic insights into the impact of charge balancing cations on the structure and properties of aluminosilicate glasses10.1103/PhysRevB.100.144109 ↗
34. The influence of structure on the physico-chemical properties of slags10.2355/isijinternational.33.148 ↗
35. Chemical order in mixed-cation silicate glasses and melts10.1103/PhysRevB.68.214206 ↗
36. Melting properties and viscosity of SiO2-CaO-Al2O3-B2O3 system10.1002/srin.201400353 ↗
37. The effect of MgO on the viscosity of the CaO-SiO2-20wt%Al2O3-MgO slag system10.1002/srin.201000019 ↗
38. Investigation of the viscosity and structural properties of CaO-SiO2-TiO2 slags10.1007/s11663-014-0053-8 ↗
39. A reaction between high Mn–high Al steel and CaO–SiO2-type molten mold flux: reaction mechanism change by high Al content ([pct Al]0 = 5.2) in the steel and accumulation of reaction product at the reaction interface10.2355/isijinternational.ISIJINT-2017-603 ↗
40. Study on properties of alumina-based mould fluxes for high-Al steel slab casting10.1002/srin.201200092 ↗
41. Effects of BaO on the viscosity and structure of a new fluorine-free CaO-Al2O3-TiO2-based mold flux for high titanium steel10.1007/s11663-020-01915-8 ↗
42. Structural investigation of CaO-Al2O3 and CaO-Al2O3-CaF2 slags via Fourier transform infrared spectra10.2355/isijinternational.42.38 ↗
43. Raman spectroscopy of calcium aluminate glasses and crystals10.1016/0022-3093(83)90672-5 ↗
44. Structure-viscosity relationship of low-silica calcium aluminosilicate melts10.2355/isijinternational.54.2031 ↗
45. Effects of Al2O3, B2O3, Na2O, and SiO2 on nepheline formation in borosilicate glasses: chemical and physical correlations10.1016/j.jnoncrysol.2003.08.082 ↗
46. Effects of fluorine on solidification, viscosity, structure, and heat transfer of CaO-Al2O3-based mold fluxes10.1007/s11663-019-01579-z ↗
47. Effect of Al speciation on the structure of high-Al steels mold fluxes containing fluoride10.1111/jace.14444 ↗
48. Effect of Al2O3 on the viscosity and structure of calcium silicate-based melts containing Na2O and CaF210.1016/j.jnoncrysol.2012.04.009 ↗
49. Structure and properties of lime alumino-borate glasses10.1016/j.chemgeo.2016.11.025 ↗
50. Site connectivities in sodium aluminoborate glasses: multinuclear and multiple quantum NMR results10.1016/j.ssnmr.2004.08.003 ↗
51. The structure of crystals, glasses, and melts along the CaO-Al2O3 join: results from Raman, Al L-and K-edge X-ray absorption, and 27Al NMR spectroscopy10.2138/am.2010.3465 ↗
52. Structural studies of silicate glasses and melts — applications and limitations of Raman spectroscopy
53. Structure and properties of fluorine-bearing aluminosilicate melts: the system Na2O-Al2O3-SiO2-F at 1 atm10.1007/BF00413348 ↗
54. Thermo-physical properties of B2O3-containing mold flux for high carbon steels in thin slab continuous casters: structure, viscosity, crystallization, and wettability10.1007/s11663-016-0720-z ↗