High temperature resistant thin film thermocouple prepared based on inkjet printing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Scientific Measurement and Uncertainty Evaluation · Calibration and Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Additive manufacture of ceramics components by inkjet printing10.15302/J-ENG-2015014 ↗
2. 3D bioprinting: a novel Avenue for manufacturing tissues and organs10.1016/j.eng.2019.03.009 ↗
3. Analysis of the causes of the emergency shutdown of natural gas-fired water peak boilers at the large municipal combined heat and powerplant10.3390/en16176278 ↗
4. Innovative instrumented sliding bearings as a new approach to on-board bearing monitoring
5. A methodology for identifying the most suitable measurements for engine level and component level gas path diagnostics of a micro gas turbine
6. Stability and microstructure of indium tin oxynitride thin films10.1111/j.1551-2916.2011.04845.x ↗
7. Fabrication and calibration of pt-rh10/pt thin-film thermocouple10.3390/mi14010004 ↗
8. Preparation of t-type flexible thin film thermocouple by magnetron sputtering
9. Simulation, fabrication, and characteristics of high-temperature, quick-response tungsten-rhenium thin-film thermocouples probe sensor10.1088/1361-6501/ac750d ↗
10. A thin-film temperature sensor based on a flexible electrode and substrate10.1038/s41378-021-00271-0 ↗
11. La(ca)cro-filled sicn precursor thin film temperature sensor capable to measure up to 1100°c high temperature10.3390/mi14091719 ↗
12. Enhanced high-temperature stability of indium tin oxide-indium oxide thermocouples by two-step annealing10.1016/j.tsf.2023.139780 ↗
13. Conformal fabrication of functional polymer-derived ceramics thin films10.1016/j.surfcoat.2023.129536 ↗
14. High temperature protection performance of sandwich structure alo/sin/yalo multilayer films for pt-pt10%rh thin film thermocouples10.1016/j.ceramint.2022.07.343 ↗
15. Thin-film thermocouples of ni-joined thermoelectric ca3co4o910.1016/j.mssp.2022.107300 ↗
16. Temperature sensors by inkjet printing compatible with flexible substrates: a review10.1109/JSEN.2022.3213072 ↗
17. Organic thermoelectric devices based on a stable n-type nanocomposite printed on paper10.1039/C7SE00313G ↗
18. Inkjet-printed hydrogen peroxide sensor with sensitivity enhanced by plasma activated inorganic metal salt inks10.1109/JMEMS.2020.3010371 ↗
19. Defect-free metal deposition on 2d materials via inkjet printing technology
20. Device optimization and large-scale roll-to-roll manufacturability of flexible thin-film thermoelectric generators10.1002/ente.202001008 ↗
21. Flexible thermoelectric generators with inkjet-printed bismuth telluride nanowires and liquid metal contacts10.1039/C8NR09101C ↗
22. Reshapeable, rehealable and recyclable sensor fabricated by direct ink writing of conductive composites based on covalent adaptable network polymers10.1088/2631-7990/ac37f2 ↗
23. Chip-by-chip configurable interconnection using digital printing techniques10.1088/1361-6439/aa5ef3 ↗
24. Recent developments of inkjet-printed flexible sensing electronics for wearable device applications: a review10.1108/SR-08-2020-0190 ↗
25. Additive-free aqueous mxene inks for thermal inkjet printing on textiles10.1002/smll.202006376 ↗
26. Hybrid additive manufacturing of a piezopolymer-based inertial sensor
27. Sequential oxidation strategy for the fabrication of liquid metal electrothermal thin film with desired printing and functional property10.3390/mi12121539 ↗
28. Inkjet printing of perovskites for breaking performance-temperature tradeoffs in fabric-based thermistors
29. 10.1002/adfm.202006273.10.1002/adfm.202006273 ↗
30. Inkjet-printed temperature sensors characterized according to standards10.3390/s22218145 ↗
31. Thin-film temperature sensors with grid-type circuits for temperature distribution measurements10.1016/j.sna.2023.114903 ↗
32. Fully printed high-performance n-type metal oxide thin-film transistors utilizing coffee-ring effect10.1007/s40820-021-00694-4 ↗
33. Influence of alkane and perfluorocarbon vapors on adsorbed surface layers and spread insoluble monolayers of surfactants, proteins and lipids10.1016/j.cis.2015.11.004 ↗
34. Fabrication of ti sic-based pastes for screen printing on paper-derived alo substrates10.1016/j.ceramint.2018.01.256 ↗
35. Effect of annealing on the thermoelectricity of indium tin oxide thin film thermocouples10.1016/j.ceramint.2019.10.190 ↗
36. Polymer-derived ceramic thin-film thermocouples for high temperature measurements10.1016/j.ceramint.2023.07.072 ↗
37. Thermoelectricity and antivibration properties of screen-printed nanodoped in zno/ino thin-film thermocouples on alumina substrates10.1016/j.ceramint.2022.05.246 ↗
38. Flexible temperature sensor with high sensitivity ranging from liquid nitrogen temperature to 1200 °c10.1088/2631-7990/aca44d ↗
39. First-principles investigation of the significant anisotropy and ultrahigh thermoelectric efficiency of a novel two-dimensional gais at room temperature10.1088/2631-7990/ac5f0f ↗
40. Large area inkjet-printed oled fabrication with solution-processed tadf ink10.1038/s41467-023-43014-7 ↗
41. Diffusion-based 3d bioprinting strategies10.1002/advs.202306470 ↗
42. Additive manufacture of ceramics components by inkjet printing10.15302/J-ENG-2015014 ↗
43. Inkjet printing ceramics: from drops to solid10.1016/j.jeurceramsoc.2011.01.016 ↗
44. Inkjet printing of su-8 for polymer-based mems a case study for microlenses
45. Numerical-calculation of the fluid-dynamics of drop-on-demand jets10.1147/rd.283.0322 ↗
46. Ink jet deposition of ceramic suspensions: modelling and experiments of droplet formation
47. Ink-jet printing of polymer light-emitting devices10.1117/12.457460 ↗
48. An experimental investigation of fluid-flow resulting from the impact of a water drop with an unyielding dry surface
49. Paper-based bimodal sensor for electronic skin applications10.1021/acsami.7b05672 ↗
50. Inkjet-printed flexible organic thin-film thermoelectric devices based on p- and n-type poly(metal 1,1,2,2-ethenetetrathiolate)s/polymer composites through ball-milling
51. Vertically stacked nanocellulose tactile sensor10.1039/C7NR03685J ↗
52. Inkjet printing flexible thermoelectric devices using metal chalcogenide nanowires10.1002/adfm.202213564 ↗
53. Inkjet printed large-area flexible few-layer graphene thermoelectrics10.1002/adfm.201800480 ↗
54. Inkjet printing of single-crystalline bite thermoelectric nanowire networks10.1002/aelm.201600524 ↗
55. Fabrication of flexible thermoelectric thin film devices by inkjet printing10.1002/smll.201303126 ↗
56. High temporal resolution transparent thermoelectric temperature sensors for photothermal effect sensing10.1039/D2MH00813K ↗