Advanced ceramics and coatings for wear and corrosion related applications in modern high-efficient coal production and processing: A technical review
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · Materials Engineering and Processing · Coal Combustion and Slurry Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Considering non-power generation uses of coal in the United States
2. Raask · 1985
3. Practical experience with wastage at elevated temperatures in coal combustion systems10.1016/0043-1648(95)07189-X ↗
4. Corrosion of mild steel by coal and iron ore10.1016/S0010-938X(02)00063-X ↗
5. Effect of coal slurry on the corrosion in coal mine equipment
6. Some corrosion and metallurgy issues in coal mines
7. Analysis on the localized corrosion of hydraulic support after short-term service in coal mine
8. Advances in the chemical leaching (Inorgano-Leaching), bio-leaching and desulphurisation of coals10.1007/s40789-019-0253-6 ↗
9. Review on chemical upgrading of coal: production processes, potential applications and recent developments10.1016/j.fuproc.2016.12.010 ↗
10. Demineralization and desulfurization process to generate clean coal
11. Effect of some operational parameters on desulphurization of high sulphur Indian coal by KOH leaching10.1177/0144598718768981 ↗
12. High-pressure HCl leaching of coal ash to extract Al into a chloride solution with further use as a coagulant for water treatment
13. High temperature corrosion issues in energy-related systems10.1590/S1516-14392004000100002 ↗
14. Properties and developments of combustion and gasification of coal and char in a CO2-rich and recycled flue gases atmosphere by rapid heating10.1155/2012/241587 ↗
15. Effects of plant additives on the concentration of sulfur and nitrogen oxides in the combustion products of coal-water slurries containing petrochemicals10.1016/j.envpol.2019.113682 ↗
16. Simulation study of the formation of corrosive gases in coal combustion in a entrained flow reactor10.3390/en13174523 ↗
17. Effect of flue gases' corrosive components on the degradation process of evaporator tubes10.3390/ma14143860 ↗
18. 2012
19. Materials challenges for advanced combustion and gasification fossil energy systems10.1007/s11661-011-0627-x ↗
20. Boiler materials for ultra-supercritical coal power plants – steamside oxidation10.1361/105994906X108756 ↗
21. Corrosion of type 316L stainless steel piping in synthetic gas plants10.5006/0759 ↗
22. Corrosion of stainless steel in coal gasification plant
23. Corrosion behavior 310 stainless steel in superheated steam10.1007/s11085-015-9591-y ↗
24. The oxidation behavior of metals and alloys at high temperatures in atmospheres containing water vapor: a review10.1016/j.pmatsci.2007.11.001 ↗
25. Shirzadi · 2014 · vol. 45
26. Hot corrosion of superalloys in boiler for ultra-supercritical power plants
27. Failure mechanisms in high chrome oxide gasifier refractories10.1007/s11661-011-0635-x ↗
28. Lai · 2007 · 259
29. Sulfidic corrosion in refineries – a review10.1515/CORRREV.2011.021 ↗
30. Investigation on the corrosion of the elbows in the flue gas cooler of a 600 MW coal-fired power plant10.1021/acsomega.0c04838 ↗
31. High temperature corrosion in gasifiers10.1590/S1516-14392004000100009 ↗
32. Bakker · 2000
33. Natesan · 2002
34. Materials challenges and gasifier choices in IGCC processes for clean and efficient energy conversion10.1179/143307511X13189528030870 ↗
35. High temperature degradation in power plants and refineries10.1590/S1516-14392004000100015 ↗
36. Fluidized bed combustion and gasification of fossil and renewable slurry fuels10.3390/en14227766 ↗
37. Burning properties of slurry based on coal and processing waste10.1021/acs.energyfuels.5b02881 ↗
38. Thermochemical biomass gasification: a review of the current status of the technology10.3390/en20300556 ↗
39. Mineral matter interactions during Co-pyrolysis of coal and biomass and their impact on intrinsic char Co-gasification reactivity10.1016/j.cej.2015.05.057 ↗
40. A critical review of mineral matter related issues during gasification of coal in fixed, fluidized, and entrained flow gasifiers10.3390/en80910430 ↗
41. Fluidized bed combustion of alternative solid fuels; status, successes and problems of the technology10.1016/0360-1285(95)00005-3 ↗
42. Research of the fluidized bed combustion in the laboratory for thermal engineering and energy. Part B: achievements in technology implementation10.2298/TSCI180725290G ↗
43. Initial study of metal dusting behavior of Fe-Cr and Fe-Ni-Cr alloys under a simulated blast furnace operating condition
44. Metal dusting10.1002/maco.200303729 ↗
45. Recent advances in understanding metal dusting: a review10.1002/maco.201005675 ↗
46. Erosion and hot corrosion phenomena in thermal power plant and their preventive methods: a study10.51983/arme-2018.7.1.2436 ↗
47. Evaluation and improvement of the coupled effect of high-temperature corrosion-erosion on water wall tubes10.1088/1755-1315/603/1/012016 ↗
48. High temperature degradation by erosion-corrosion in bubbling fluidized bed combustors10.1590/S1516-14392004000100011 ↗
49. Characteristics of corrosion related to ash deposition on boiler heating surface during cofiring of coal and biomass10.1155/2020/2175795 ↗
50. Characterisation of the austenitic steels super 304H and HR3C after air and steam oxidation10.1080/09603409.2022.2056297 ↗
51. Simulated fireside corrosion of T91 in oxy-combustion systems with emphasis on coal/biomass environments10.1080/09603409.2019.1626612 ↗
52. A new approach for the classification of coal fly ash based on their origin, composition, properties and behaviour10.1016/j.fuel.2006.11.020 ↗
53. Numerical simulation of the blade aging process in an induced draft fan due to long time exposition to fly ash particles10.1115/1.4041127 ↗
54. Waste classification of slag generated in a pilot-scale entrained-flow gasifier10.4177/CCGP-D-11-00011.1 ↗
55. Degradation of gas turbine systems10.1115/1.1340629 ↗
56. Materials selection for wear resistance
57. 2005
58. Refractory ceramic coatings: processes, systems and wettability/adhesion10.1002/sia.1092 ↗
59. Wear map of ceramics10.1016/S0043-1648(96)07363-2 ↗
60. Budinski · 2021
61. A review on particulate slurry erosive wear of industrial materials: in context with pipeline transportation of mineral-slurry10.1080/02726351.2015.1131792 ↗
62. Hutchings · 2017
63. Wear and wear particles – some fundamentals
64. Rabinowicz · 2013
65. An influence of factors of flow condition, particle and material properties on slurry erosion resistance
66. Erosion-corrosion in single- and multiphase flow
67. Erosion–corrosion resistance of engineering materials in various test conditions10.1016/j.wear.2009.01.052 ↗
68. Practical estimation of erosion damage caused by solid particle impact. Part. 1: effect of impact parameters on a predictive equation10.1016/j.wear.2005.01.039 ↗
69. Advanced ceramics and coatings for erosion-related applications in mineral and oil and gas production: a technical review10.1111/ijac.14240 ↗
70. On the hardness and brittleness of ceramics10.4028/www.scientific.net/KEM.132-136.460 ↗
71. Erosion-corrosion in oil and gas production
72. Mapping erosion-corrosion of carbon steel in oil exploration conditions: some new approaches to characterizing mechanisms and synergies10.1016/j.triboint.2010.01.005 ↗
73. A critical review of the tribocorrosion of cemented and thermal spayed tungsten carbide10.1016/j.triboint.2017.10.006 ↗
74. Modelling the tribo-corrosion interaction in aqueous sliding conditions10.1016/S0301-679X(02)00058-0 ↗
75. Some views on the mapping of erosion coated composites in tidal turbine simulation condition10.1080/10402004.2019.1581313 ↗
76. Thermodynamics of the relationship between lattice energy and lattice enthalpy10.1021/ed082p950 ↗
77. Trolier-McKinstry · 2018
78. Chen · 2022
79. Ceramics in corrosive environments
80. Review of high entropy ceramics: design, synthesis, structure and properties10.1039/C9TA05698J ↗
81. Samsonov · 2012
82. Brittle solids: from physics and chemistry to material applications10.1146/annurev-matsci-070121-042249 ↗
83. Pihl · 2002 · 124
84. Ceramic science of crystal defect cores10.2109/jcersj2.22080 ↗
85. Structural reliability: a processing-dependent phenomenon10.1111/j.1151-2916.1982.tb10380.x ↗
86. Powder processing science and technology for increased reliability10.1111/j.1151-2916.1989.tb05945.x ↗
87. Influence of various consolidation techniques on the green microstructure and sintering behavior of alumina powders10.1111/j.1151-2916.1988.tb07567.x ↗
88. Influence of corrosion and mechanical loads on advanced ceramic components10.1016/j.ceramint.2012.09.040 ↗
89. Compaction of aggregated ceramic powders: from contact laws to fracture and yield stress10.1016/j.powtec.2009.11.013 ↗
90. Localized corrosion mechanisms of the multilayered coatings related to growth defects10.1016/S0257-8972(03)00939-3 ↗
91. Ceramic applications for wear protection of pipe lines and cyclones
92. Wear resistance of materials used for slurry transport10.1016/j.wear.2015.01.005 ↗
93. New processes or old: complex shape processing of advanced ceramics10.1179/174367605X16644 ↗
94. Progress in advanced ceramics research enabled by novel processing and materials technologies
95. Mechanical characteristics of fused cast basalt tube encased in steel pipe for protecting steel surface10.1016/S1003-6326(08)60381-7 ↗
96. Glass-ceramics obtained by the crystallization of basalt10.2298/SOS1003383C ↗
97. Basaltic glass-ceramics: a short review
98. Composite pipes inserted by fused cast basalt tube to prevent abrasion and corrosion of pipes in the desulfurization system
99. Mullite-based ceramics from mining waste: a review10.3390/min11030332 ↗
100. Strong structure formation of ceramic composites based on coal mining overburden rocks10.3390/jcs7050209 ↗