Preparation and characterization of organic-inorganic hybrid ZrOC/PF aerogel used as high-temperature insulator
Source abstract
Abstract
Abstract Organic-inorganic hybrid ZrOC/PF aerogel composite is successfully prepared via one sol-gel polymerization process, using PF and ZrOC sols as precursor, respectively. SEM, BET, FT-IR, and XPS measurements are used to investigate the effect of the mass ratio of ZrOC to PF on physical, microstructure, and thermal properties of the composite aerogels. Results show that the aerogels exhibit relative low density (0.258–0.332 g/cm3), relative high compressive strength (0.32–1.40 MPa), and low thermal conductivity (0.0466–0.0660 W/m·K). SEM images demonstrated that the particles are composed of the tangled clusters of the PF and ZrOC and the particle size ranges from a dozen nm to tens of nm, up to several microns. XPS results indicate that elements C, O, and Zr in the samples are based on C–C and Zr–O valences band binding, respectively. The ZrOC/PF aerogel with excellent physical property and potential high-temperature resistance may be used in aerospace in the near future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Advanced ceramic materials synthesis · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Double-negative-index ceramic aerogels for thermal super insulation10.1126/science.aav7304 ↗
2. Review of hydrogels and aerogels containing nanocellulose10.1021/acs.chemmater.7b00531 ↗
3. Fire-retardant and thermally insulating phenolic-silica aerogels
4. General and straightforward synthetic route to phenolic resin gels templated by chitosan networks10.1021/cm504036u ↗
5. Preparation of PR/SiO2 hybrid phenolic aerogel with bi-component gel networks
6. Preparation and characterization of polymer-derived Zr/Si/C multiphase ceramics and microspheres with electromagnetic wave absorbing capabilities10.1016/j.jeurceramsoc.2017.01.006 ↗
7. Densification, microstructure and mechanical properties of ZrB–SiCw ceramic composites10.1016/j.jeurceramsoc.2009.03.008 ↗
8. Oxidation and recession of plain weave carbon fiber reinforced ZrB2-SiC-ZrC in oxygen–hydrogen torch environment10.1016/j.jeurceramsoc.2019.03.010 ↗
9. 3D Cf/SiC-ZrC-ZrB2 composites fabricated via sol-gel process combined with reactive melt infiltration10.1016/j.jeurceramsoc.2016.04.011 ↗
10. Ablation behavior of three-dimensional Cf/SiC-ZrC-ZrB2 composites prepared by a joint process of sol-gel and reactive melt infiltration10.1016/j.corsci.2018.02.011 ↗
11. Novel self-reinforcing ZrO2-SiO2 aerogels with high mechanical strength and ultralow thermal conductivity10.1016/j.ceramint.2018.05.199 ↗
12. An ultralight silica-modified ZrO2-SiO2 aerogel composite with ultra-low thermal conductivity and enhanced mechanical strength10.1016/j.scriptamat.2017.09.028 ↗
13. Zirconia-based alumina compound aerogels with enhanced mesopore structure10.1016/j.ceramint.2018.03.081 ↗
14. A study on the properties of Zr-doped γ-Al2O3 xerogels hybridized with α-Al2O3 whiskers synthesized by solvothermal drying10.1016/j.surfcoat.2012.05.049 ↗
15. Synthesis of nanosized zirconium carbide powders by a combinational method of sol–gel and pulse current heating10.1016/j.jeurceramsoc.2013.07.003 ↗
16. Synthesis and pyrolysis evolution of glucose-derived hydrothermal precursor for nanosized zirconium carbide10.1016/j.ceramint.2016.03.171 ↗
17. In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: processing, microstructure, mechanical properties and oxidation behavior10.1016/j.jallcom.2019.151687 ↗
18. Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity10.1007/s10971-018-4638-6 ↗
19. Hyperbolically patterned 3D graphene metamaterial with negative Poisson's ratio and superelasticity10.1002/adma.201505409 ↗
20. Preparation of stable ZrC sol by sol-gel method
21. The chemistry of novolac resins: 3. 13 C and 15 N n.m.r. studies of curing with hexamethylenetetramine10.1016/S0032-3861(97)00141-9 ↗
22. Phase composition, microstructure and mechanical properties of ZrC coatings produced by chemical vapor deposition10.1016/j.ceramint.2013.06.059 ↗
23. Low-temperature synthesis of nanocrystalline ZrC coatings on flake graphite by molten salts10.1016/j.apsusc.2017.02.196 ↗
24. Bulk and surface properties of copper-containing oxides of the general formula LaZr1-xCuxO310.1006/jssc.1994.1047 ↗
25. Structurally designed synthesis of mechanically stable poly(benzoxazine-co-resol)-based porous carbon monoliths and their application as high-performance CO2 capture sorbents
26. Design and fabrication of hierarchically porous carbon with a template-free method10.1038/srep06349 ↗
27. Synthesis of biopolymer-derived zirconium carbide powder by facile one-pot reaction10.1111/jace.13321 ↗
28. Synthesis and pyrolysis behavior of a soluble polymer precursor for ultra-fine zirconium carbide powders10.1016/j.ceramint.2015.02.039 ↗
29. Gas pressure dependence of the heat transport in porous solids with pores smaller than 10 μm10.1007/s10765-009-0617-z ↗