Effect of surfactants with different ionizing properties on dispersion stability and PCMP properties of CeO2 nanoparticle polishing slurry
Source abstract
Abstract
CeO 2 nanoparticles have small particle size, quantum size effect and surface effect, which make the particles easy to agglomerate. How to restrain the agglomeration of particles is the key to the preparation of high-quality CeO 2 polishing paste, and it is also a research hotspot in the field of fine powder . Therefore, this study is devoted to using different kinds of surfactants and their additives to improve the dispersion stability of Ce 0.96 Y 0.02 Pr 0.02 O 2 polishing solution and the performance of photocatalysis-assisted chemical mechanical polishing (PCMP), including cationic surfactant (Cetyl trimethyl ammonium bromide, CTAB), anionic surfactant (Sodium dodecyl benzene sulfonate, SDBS) and Nonionic surfactant (Polyvinylpyrrolidone, PVP). The results of dispersion stability show that compared with CTAB and SDBS, the polishing solution containing 2.5 wt% PVP has the advantages of slow settling rate and high absorbance, and the improvement effect of dispersion stability is the best. In addition, the polishing properties of different surfactants in quartz glass photocatalysis-assisted chemical mechanical polishing were analyzed. The polishing solution prepared with PVP as dispersant has lower surface roughness (Ra:0.13 nm). However, it is worth noting that the material removal rate decreases after the addition of surfactant, which may be related to the lubrication of surfactant in polishing slurry . Through the test of the friction coefficient , it can be seen that the introduction of surfactant does reduce the friction coefficient of the polishing slurry, and then affect the improvement of material removal rate. Finally, it is proposed that the dispersion mechanisms of CTAB, SDBS and PVP are electrostatic stability, electrostatic stability and steric hindrance stability, respectively. The dispersion mechanism of different surfactants can provide a theoretical basis for researchers to optimize the polishing process and provide guidance for the selection of suitable surfactants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Angstrom surface on copper induced by novel green chemical mechanical polishing using ceria and silica composite abrasives10.1016/j.apsusc.2023.158382 ↗
2. Influence of anionic polyelectrolyte addition on ceria dispersion behavior for quartz chemical mechanical polishing10.1016/j.colsurfa.2012.07.009 ↗
3. Development of carbon sphere/ceria (CS/CeO2) heterostructured particles and their applications to functional abrasives toward photochemical mechanical polishing10.1016/j.apsusc.2022.153449 ↗
4. Environment-friendly electrochemical mechanical polishing using solid polymer electrolyte/CeO2 composite pad for highly efficient finishing of 4H-SiC (0001) surface10.1016/j.apsusc.2023.157190 ↗
5. Scratch and wear resistance of hydrophobic CeO2-x coatings synthesized by reactive magnetron sputtering10.1016/j.ceramint.2019.08.237 ↗
6. Preparation of lanthanide-doped polystyrene/CeO2 abrasives and investigation of slurry stability and photochemical mechanical polishing performance10.1016/j.colsurfa.2022.130508 ↗
7. Insights into facet-dependent reactivity of CuO-CeO2 nanocubes and nanorods as catalysts for CO oxidation reaction10.1016/S1872-2067(20)63533-1 ↗
8. A novel thermophotocatalyst of mixed-phase cerium oxide (CeO2/Ce2O3) homocomposite nanostructure: role of interface and oxygen vacancies10.1016/j.solmat.2015.06.027 ↗
9. Synthesis and photocatalytic performance of yttrium-doped CeO2 with a hollow sphere structure10.1016/j.cattod.2016.06.049 ↗
10. Doping strategy on properties and chemical mechanical polishing performance of CeO2 Abrasives: a DFT assisted experimental study10.1016/j.apsusc.2023.156997 ↗
11. Enhancing the polishing efficiency of CeO2 abrasives on the SiO2 substrates by improving the Ce3+ concentration on their surface10.1021/acsaelm.2c01553 ↗
12. Defect generation and morphology transformation mechanism of CeO2 particles prepared by molten salt method10.1016/j.ceramint.2022.10.007 ↗
13. Size effect of CeO2 particle on nanoscale single-asperity sliding friction
14. Preparation of CeO2 abrasives by reducing atmosphere-assisted molten salt method for enhancing their chemical mechanical polishing performance on SiO2 substrates10.1016/j.jre.2022.10.011 ↗
15. Superparamagnetic colloids: controlled synthesis and niche applications10.1002/adma.200600674 ↗
16. Charged micelle halo mechanism for agglomeration reduction in metal oxide particle based polishing slurries10.1016/j.colsurfa.2014.01.061 ↗
17. Method for determining stability of CMP slurry10.1149/2.0241808jss ↗
18. Ultra-precision finishing of micro-aspheric mold using a magnetostrictive vibrating polisher10.1016/j.cirp.2012.03.141 ↗
19. Analysis of surface finish improvement during ultrasonic assisted magnetic abrasive finishing on chemically treated tungsten substrate10.1016/j.promfg.2017.07.040 ↗
20. Ultraprecision finishing of micro-aspheric surface by ultrasonic two-axis vibration assisted polishing10.1016/j.cirp.2010.03.117 ↗
21. Study on optimization of ultrasonic-vibration-assisted polishing process parameters10.1016/j.measurement.2018.12.008 ↗
22. Material removal mechanism in ultrasonic vibration assisted polishing of micro cylindrical surface on SiC10.1016/j.ijmachtools.2016.01.003 ↗
23. Improving the dispersion stability and chemical mechanical polishing performance of CeO2 slurries10.1149/2162-8777/accaa5 ↗
24. Development of Highly stable ceria slurry in acetic acid-ammonium acetate buffer Media for effective chemical mechanical polishing of silicon dioxide10.1016/j.mssp.2024.108411 ↗
25. Novel surface modification strategies for enhanced CeO2 nanoparticle dispersion and suspension stability
26. The influence of CeO2 abrasive size on the performance of photocatalytic assisted chemical-mechanical polishing by Y/Pr co-doping strategy10.1016/j.colsurfa.2023.133107 ↗
27. Enhancement mechanism of Y-doped Ce1-xYxO2 for photocatalytic-assisted chemical-mechanical polishing
28. Core/shell composites with polystyrene cores and meso-silica shells as abrasives for improved chemical mechanical polishing behavior10.1007/s11051-015-3172-5 ↗
29. Dispersion stability of CeO2 NanoParticles polishing agent and its properties in chemical mechanical polishing process
30. Zeta potential measurement10.1007/978-1-60327-198-1_6 ↗
31. Synthesis of CeO2 nanoparticles derived by urea condensation for chemical mechanical polishing10.1007/s13391-023-00427-2 ↗
32. Preparation of lanthanide-doped polystyrene/CeO2 abrasives and investigation of slurry stability and photochemical mechanical polishing performance10.1016/j.colsurfa.2022.130508 ↗
33. Development of carbon sphere/ceria (CS/CeO2) heterostructured particles and their applications to functional abrasives toward photochemical mechanical polishing10.1016/j.apsusc.2022.153449 ↗
34. Photo-oxidative degradation of polyacids derived ceria nanoparticle modulation for chemical mechanical polishing10.1038/s41598-021-03866-9 ↗
35. Development of Zr- and Gd-doped porous ceria (pCeO2) abrasives for achieving high-quality and high-efficiency oxide chemical mechanical polishing10.1016/j.ceramint.2022.01.289 ↗
36. Novel polystyrene/CeO2-TiO2 multicomponent core/shell abrasives for high-efficiency and high-quality photocatalytic-assisted chemical mechanical polishing of reaction-bonded silicon carbide10.1016/j.apsusc.2019.04.037 ↗
37. Core/shell structured PS/mSiO2 hybrid particles: controlled preparation, mechanical property, and their size-dependent CMP performance10.1016/j.jallcom.2018.11.314 ↗
38. Polymethylmethacrylate (PMMA)/CeO2 hybrid particles for enhanced chemical mechanical polishing performance10.1016/j.triboint.2014.10.013 ↗
39. Chemical mechanical polishing for SiO2 film using Polystyrene@ceria (PS@CeO2) core–shell nanocomposites10.1007/s10904-015-0253-y ↗
40. Polishing behavior of PS/CeO2 hybrid microspheres with controlled shell thickness on silicon dioxide CMP10.1016/j.apsusc.2011.05.047 ↗
41. Synthesis, characterization of CeO2@SiO2 nanoparticles and their oxide CMP behavior10.1016/j.mee.2009.09.012 ↗