Development of epoxy/rice straw-based cellulose nanowhiskers composite smart coating immobilized with rare-earth doped aluminate: Photoluminescence and anticorrosion properties for sustainability
Source abstract
Abstract
Abstract Novel epoxy resin (E)/CNW nanocomposite coatings were developed with different total contents of rare-earth doped aluminate nanoparticles (REA NPs). The produced epoxy-cellulose nanowhiskers-rare earth doped aluminate nanoparticles (E-CNW-REA) coatings were applied onto mild steel. The epoxy/CNW nanocomposite coatings were characterized by X-ray fluorescence analysis (XRF), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDXA), transmission electron microscope (TEM) and infrared spectra (FT-IR). Both colorimetric properties and transparency of the nanocomposite coatings were proved by exploring UV–Vis absorption spectroscopy and CIE Lab parameters. The hardness and superhydrophobic properties were also explored. The photoluminescent transparent coatings showed an excitation at 365 nm, and a bright green emission wavelength at 517 nm under UV light. The corrosion protection performance of the coated mild steel samples soaked in an aqueous solution of sodium chloride (3.5%) was investigated using electrochemical impedance spectroscopy (EIS). The coatings with CNW were found to have anti-corrosion properties. Moreover, the nanocomposite coating with CNW (1 w%) was monitored to exhibit the most pronounced long-persistent photoluminescence for 60 min in the dark. The photoluminescent coatings exhibited highly durable long-lasting phosphorescence. Thus, the current strategy can be considered as a simple promising technology for industrial production of anti-corrosive, superhydrophobic and long-persistent phosphorescent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Magnesium Oxide Properties and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Light‐responsive luminescent materials for information encryption against burst force attack10.1002/smll.202100377 ↗
2. Stimuli‐responsive lanthanide‐based smart luminescent materials for optical encoding and bio‐applications10.1002/cnma.201800212 ↗
3. From chromic switchable hydrazones to smart materials10.1016/j.matchemphys.2020.123456 ↗
4. Constructing multi‐stimuli‐responsive luminescent materials through outer sphere electron transfer in ion pairs10.1002/adom.201801657 ↗
5. Effect of sol–gel combustion temperature on the luminescent properties of trivalent Dy doped SrAl2O410.1016/j.ceramint.2015.01.012 ↗
6. Preparation of multifunctional long‐persistent photoluminescence cellulose fibres10.1002/bio.4123 ↗
7. Translucent and persistent luminescent SrAl2O4: Eu2+ Dy3+ ceramics10.1016/j.ceramint.2015.11.108 ↗
8. The boron effect on low temperature luminescence of SrAl2O4: Eu, Dy10.1016/j.ceramint.2020.01.208 ↗
9. Facile development of photochromic cellulose acetate transparent nanocomposite film immobilized with lanthanide‐doped pigment: ultraviolet blocking, superhydrophobic, and antimicrobial activity10.1002/bio.3974 ↗
10. Photoresponsive luminescent polymeric hydrogels for reversible information encryption and decryption10.1002/advs.201901529 ↗
11. An enhanced long-persistent red phosphor: CaS: Eu2+, Tm3+, Ce3+10.1149/1.2408995 ↗
12. Luminescence properties of Tb3+ doped Sr2SnO4 green phosphor in UV/VUV regions10.1002/bio.2401 ↗
13. Preparation of CaAl2O4: Eu2+, Nd3+ and SrAl2O4: Eu2+, Dy3+ long afterglow luminescent materials using oil shale ash10.1016/j.optmat.2017.03.052 ↗
14. Persistent luminescence in Eu2+-doped compounds: a review10.3390/ma3042536 ↗
15. Deep‐red photoluminescence and long persistent luminescence in double perovstkite‐type La2MgGeO6: Mn4+10.1111/jace.15312 ↗
16. Photoluminescent spray-coated paper sheet: write-in-the-dark10.1016/j.carbpol.2018.07.094 ↗
17. Development of photoluminescent, superhydrophobic, and electrically conductive cotton fibres10.1002/bio.4024 ↗
18. Sol–gel synthesis and investigation of un-doped and Ce-doped strontium aluminates10.1016/j.ceramint.2012.04.042 ↗
19. Development of electrospun nanofibrous-walled tubes for potential production of photoluminescent endoscopes10.1021/acs.iecr.1c01519 ↗
20. Structural, thermal and light emission properties of Eu, Sm, Dy, Er and Mn doped CaAl2O4 and SrAl2O410.1016/j.ceramint.2021.02.054 ↗
21. Study on characteristics and afterglow properties of luminous polypropylene/rare earth strontium aluminate fiber10.1007/s10854-017-6525-2 ↗
22. Phosphor polymer nanocomposite: SrAl2O4: Eu2+, Dy3+ embedded PMMA for solid-state applications
23. Dislocation density level induced divergence between stress-free afterglow and mechanoluminescence in SrAl2O4: Eu2+, Dy3+10.1016/j.ceramint.2018.10.066 ↗
24. MN and DY doped strontium aluminate’soptical properties-a comparative study
25. A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments10.1016/j.compstruct.2019.111372 ↗
26. A review on fundamentals and strategy of epoxy-resin-based anticorrosive coating materials
27. Nanostructured epoxy adhesives: a review10.1016/j.porgcoat.2019.06.028 ↗
28. Synthesis and application of thermal latent initiators of epoxy resins: a review10.1002/app.49592 ↗
29. A comprehensive review on chemical properties and applications of biopolymers and their composites10.1016/j.ijbiomac.2020.03.120 ↗
30. Commercial application of cellulose nano-composites–A review
31. Environmental remediation of heavy metal ions by novel-nanomaterials: a review10.1016/j.envpol.2018.12.076 ↗
32. Polylactic acid (PLA)/cellulose nanowhiskers (CNWs) composite nanofibers: microstructural and properties analysis10.3390/jcs2010004 ↗
33. Surface charge on chitosan/cellulose nanowhiskers composite via functionalized and untreated carbon nanotube10.1016/j.arabjc.2021.103022 ↗
34. Cellulose nanowhiskers improve the methylene blue adsorption capacity of chitosan-g-poly (acrylic acid) hydrogel10.1016/j.carbpol.2017.10.079 ↗
35. Preparation and characterization of reinforced poly (ε‐caprolactone) nanocomposites by cellulose nanowhiskers10.1002/pc.25393 ↗
36. Novel sandwiched structures in starch/cellulose nanowhiskers (CNWs) composite films10.1016/j.coco.2017.03.001 ↗
37. Photochromic and fluorescent ink using photoluminescent strontium aluminate pigment and screen printing towards anticounterfeiting documents10.1002/bio.3987 ↗
38. Tailoring the oxygen reduction activity of Pt nanoparticles through surface defects: a simple top-down approach10.1021/acscatal.9b04974 ↗
39. Novel halochromic cellulose nanowhiskers from rice straw: visual detection of urea10.1016/j.carbpol.2019.115740 ↗
40. Extraction of cellulose nanowhiskers from natural fibers and agricultural byproducts10.1007/s12221-013-1118-z ↗
41. Development of mechanically reliable and transparent photochromic film using solution blowing spinning technology for anti-counterfeiting applications10.1021/acsomega.1c04127 ↗
42. Development of long‐persistent photoluminescent epoxy resin immobilized with europium (II)‐doped strontium aluminate10.1002/bio.3752 ↗
43. Development of photoluminescent translucent wood toward photochromic smart window applications10.1021/acs.iecr.1c01603 ↗
44. Anticorrosion properties of epoxy/nanocellulose nanocomposite coating