Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism
Source abstract
Abstract
Abstract SiC is a promising functional ceramic material with many great properties. High concentrated SiC slurry with excellent rheology and stability is required in some processes of ceramic forming. In this work, the dispersion of SiC powders was obviously improved by ternary modifiers: γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560), sodium humate and sodium dodecyl sulfate (SDS). Modified SiC slurry showed the lowest viscosity of 0.168 Pa s at a solid content of 50 vol%. The maximum absolute value of zeta potential of SiC increased from 47.3 to 61.6 mV by modification. Sedimentation experiments showed that a highly stable suspension of modified SiC was obtained at pH 10. SiC green body with high density of 2.643 g/cm3 was prepared with modified powders by slip casting. X-ray photoelectron spectra (XPS) and thermogravimetry (TG) measurements indicated the adsorption of modifiers on SiC surface. Therefore, modified SiC powders could stably disperse in aqueous media due to the increase of electrosteric repulsion between particles. The novel strategy used in this study could further improve the dispersion of SiC powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Superior B-doped SiC nanowire flexible field emitters: ultra-low turn-on fields and robust stabilities against harsh environments10.1021/acsami.7b07921 ↗
2. Processing and properties of microporous silicon carbide ceramics: a review10.1016/j.jascer.2013.07.003 ↗
3. Giant piezoresistance in B-doped SiC nanobelts with a gauge factor of - 180010.1021/acsami.0c13800 ↗
4. Mesoporous SiC with potential catalytic application by electrochemical dissolution of polycrystalline 3C-SiC10.1021/acsanm.8b00301 ↗
5. Preparation and characterization of SiC whisker-reinforced SiC porous ceramics for hot gas filtration10.1021/ie503626u ↗
6. Resistance to Thermal shock and to oxidation of metal diborides-SiC ceramics for aerospace application10.1111/j.1551-2916.2007.01589.x ↗
7. Enhanced piezoresistive behavior of SiC nanowire by coupling with piezoelectric effect10.1021/acsami.0c04111 ↗
8. Lateral enlargement growth mechanism of 3C-SiC on off-oriented 4H-SiC substrates10.1021/cg501424e ↗
9. Effect of removal of silicon on preparation of porous SiC ceramics following reaction bonding and recrystallization10.1016/j.msea.2012.04.071 ↗
10. Preparation of silicon carbide ceramics using chemical treated powder by DCC via dispersant reaction and liquid phase sintering10.1016/j.jeurceramsoc.2016.10.009 ↗
11. Additive manufacturing of advanced ceramic materials10.1016/j.pmatsci.2020.100736 ↗
12. Advanced ceramic components: materials, fabrication, and applications10.1016/j.jiec.2020.02.002 ↗
13. Cellular ceramics by slip casting of emulsified suspensions10.1016/j.jeurceramsoc.2020.04.002 ↗
14. Seventy ways to make ceramics10.1016/j.jeurceramsoc.2007.12.015 ↗
15. The influence of polyethylene imine on the gel casting of SiC with two different initiators10.1111/j.1551-2916.2007.01992.x ↗
16. Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering10.1007/s10853-006-4496-4 ↗
17. Aqueous gelcasting of solid-state-sintered SiC ceramics with the addition of the copolymer of isobutylene and maleic anhydride10.1016/j.jmatprotec.2019.03.022 ↗
18. Dispersion of silicon carbide in poly alpha olefins-6 and trimethylopropane trioleate10.1016/j.colsurfa.2016.09.003 ↗
19. Effect of organic additives on the zeta potential of PLZST and rheological properties of PLZST slurries10.1016/j.jeurceramsoc.2008.03.043 ↗
20. Preparation of SiC ceramics by aqueous gelcasting and pressureless sintering10.1016/j.msea.2006.08.047 ↗
21. Surface modification of SiC powder with sodium humate: adsorption kinetics, equilibrium, and mechanism10.1021/acs.langmuir.8b01696 ↗
22. Effect of citric acid on the adsorption behaviour of polyethylene imine (PEI) and the relevant stability of SiC slurries10.1016/j.colsurfa.2005.10.038 ↗
23. In situ surface modification of silicon carbide particles using Al3+ complexes and polyelectrolytes in aqueous suspensions10.1111/j.1151-2916.2002.tb00128.x ↗
24. Effects of dispersants on dispersibility of titanium carbide aqueous suspension10.1016/j.ijrmhm.2015.12.007 ↗
25. Effect of polyvinylpyrrolidone on rheology of aqueous SiC suspensions with polyethylene glycol as binder10.1016/j.colsurfa.2010.07.013 ↗
26. Poly(Vinyl Pyrrolidone) a dispersant for non-aqueous processing of silicon carbide10.1111/j.1551-2916.2005.00207.x ↗
27. Dispersion mechanisms of aqueous silicon nitride suspensions at high solid loading10.1016/j.msea.2006.12.059 ↗
28. Dispersion of mechanochemically activated SiC and Al2O3 powders10.1016/j.msea.2006.12.140 ↗
29. A thermochemical approach to enhance hydrophobicity of SiC/SiO2 powder using γ-methacryloxypropyl trimethoxy silane and octylphenol polyoxyethylene ether (7)10.1016/j.apsusc.2015.10.189 ↗
30. Fabrication and characterization of biodegradable KH560 crosslinked chitin hydrogels with high toughness and good biocompatibility10.1016/j.carbpol.2021.117707 ↗
31. Zeta potential and viscosity of colloidal silica suspensions: effect of seawater salts, pH, flocculant, and shear rate10.1016/j.colsurfa.2017.10.080 ↗
32. Study on fluorescence interaction between humic acid and PAHs based on two-dimensional correlation spectroscopy10.1016/j.molstruc.2020.128428 ↗
33. Sodium humate as an effective inhibitor of low-temperature coal oxidation10.1016/j.tca.2019.01.006 ↗
34. Analytical approach on surface active agents in the environment and challenges10.1016/j.teac.2019.e00061 ↗
35. Adsorption of sodium dodecyl sulfate (SDS) at ZnSe and a-Fe2O3 surfaces: combining infrared spectroscopy and batch uptake studies10.1016/j.jcis.2010.04.011 ↗
36. Interfacial ion specificity modulates hydrophobic interaction10.1016/j.jcis.2020.05.091 ↗
37. Influence of surface oxide layer of SiC powder on the rheological properties of its slurry10.1111/ijac.13385 ↗
38. Surface modification of ultrafine precipitated silica with 3-methacryloxypropyltrimethoxysilane in carbonization process10.1016/j.colsurfa.2012.11.057 ↗
39. Generality of shear thickening in dense suspensions10.1038/nmat2627 ↗
40. Surface modification of silicon carbide with silane coupling agent and hexadecyl iodiele10.1016/j.apsusc.2016.10.102 ↗
41. On the preparation of organosilanized silicon carbide aqueous suspension10.1016/j.ceramint.2019.09.154 ↗
42. The micelle thermodynamics and mixed properties of sulfobetaine-type zwitterionic gemini surfactant with nonionic and anionic surfactants10.1016/j.molliq.2019.112108 ↗
43. The effect of sol-gel process on the microstructure and particle size of ZrC-SiC composite powders10.1016/j.ceramint.2019.10.273 ↗
44. Effect of TMAH on rheological behavior of SiC aqueous suspension10.1016/j.jeurceramsoc.2003.12.023 ↗
45. Influence of TMAH and NaOH on the stability of SiC aqueous suspensions10.1016/j.ceramint.2020.01.142 ↗
46. Dispersion mechanisms in aqueous alumina suspensions at high solids loadings10.1016/j.colsurfa.2005.08.039 ↗
47. A synergistic strategy via the combination of multiple functional groups into membranes towards superior CO2 separation performances10.1016/j.memsci.2014.11.050 ↗
48. Investigation on the sulfur state and phase transformation of spent and regenerated S zorb sorbents using XPS and XRD10.1016/j.apsusc.2012.11.156 ↗
49. Influence of processing gases on the properties of cold atmospheric plasma SiOxCy coatings10.1016/j.apsusc.2013.12.108 ↗
50. Silicon oxycarbide formation on SiC surfaces and at the SiC/SiO2 interface10.1116/1.580951 ↗
51. XPS study of hydrogen permeation effect on SiC-C films10.1016/S0168-583X(03)00963-7 ↗
52. Surface modification of PVA hydrogel membranes with carboxybetaine methacrylate via PET-RAFT for anti-fouling10.1016/j.polymer.2018.12.026 ↗
53. Study of surface properties of aqueous solutions of sodium dodecyl sulfate in the presence of hydrochloric acid and heavy metal ions10.1016/j.molliq.2019.112170 ↗
54. Collodial processing of ceramics10.1111/j.1151-2916.2000.tb01560.x ↗
55. Aqueous and nonaqueous colloidal processing of difficult-to-densify ceramics: suspension rheology and particle packing10.1111/jace.13220 ↗
56. Magnetic slip casting for dense and textured ceramics: a review of current achievements and issues10.1016/j.jeurceramsoc.2020.08.030 ↗
57. Study on modification effect and mechanism of binary modifier co-modified silicon carbide powder
58. Highly concentrated aqueous suspension containing fine SiC particles10.1016/j.ceramint.2019.07.188 ↗
59. Highly concentrated aqueous SiC slurry containing fine SiC powder: a new approach for ultra‐dense green body10.1111/ijac.13398 ↗
60. Preparation of SiC porous ceramics by a novel gelcasting method assisted with surface modification10.1016/j.ceramint.2020.03.155 ↗
61. Study on gelcasting and properties of recrystallized silicon carbide10.1016/S0272-8842(01)00104-3 ↗