Anti-ablation performance of La2O3-modified ZrB2 coating on SiC-coated carbon/carbon composites
Source abstract
Abstract
Abstract La2O3-modified ZrB2 coating was prepared on SiC-coated C/C composites by supersonic atmospheric plasma spraying (SAPS) with the aim of improving the anti-ablation performance of C/C composites. The effect of La2O3 contents on the anti-ablation performance were investigated. The results indicated that the 10 vol % La2O3–ZrB2 coating shows excellent anti-ablation performance. After ablation for 120 s under low heat flux oxyacetylene flame (2400 kW/m2), the linear ablation rate and mass ablation are only −0.0167 μm/s and −0.558 mg/s, respectively. After ablation for 30 s under high heat flux of oxyacetylene flame (4200 kW/m2), the coating still remains intact. The addition of 10 vol % La2O3 is capable of enhancing the anti-ablation performance of the ZrB2 coating. The La2O3 and La2Zr2O7 phases will be soften and melting during ablation, which can form a barrier to cover the surface and effectively prevent the erosion of oxyacetylene gas. Meanwhile, the generated ZrO2 particles play the role of pinning the molten layer, thus weakening the coating exfoliation by airflow erosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Inelastic deformation under indentation and scratch loads in a ZrB2-SiC composite10.1016/j.jeurceramsoc.2009.04.014 ↗
2. A review of design issues specific to hypersonic flight vehicles10.1016/j.paerosci.2016.04.001 ↗
3. Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: a review10.1016/j.pmatsci.2016.08.003 ↗
4. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites10.1016/j.jeurceramsoc.2017.08.013 ↗
5. Ablation mechanism of carbon/carbon composites modified by HfC-SiC in two conditions under oxyacetylene torch
6. Oxidation resistant carbon materials derived from boronated carbon-silicon alloys10.1016/j.carbon.2004.07.004 ↗
7. Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites10.1016/j.carbon.2009.09.035 ↗
8. Ablation mechanism of SiC coated C/C composites at 0° angle in two flame conditions under an oxyacetylene flame10.1016/j.corsci.2014.03.009 ↗
9. Effect of architecture on mechanical properties of carbon/carbon composites10.1016/j.compstruct.2007.04.003 ↗
10. Damage tolerance of carbon-carbon composites in aerospace application10.1016/j.carbon.2017.10.019 ↗
11. Reactive infiltration processing (RIP) of ultra high temperature ceramics (UHTC) into porous C/C composite tubes10.1016/j.jeurceramsoc.2010.10.013 ↗
12. Influence of HfC nanowires on the growth behavior, microstructure and ablation resistance of CVD-HfC coating10.1016/j.ceramint.2018.11.230 ↗
13. Preparation, ablation behavior and mechanism of C/C-ZrC-SiC and C/C-SiC composites10.1016/j.ceramint.2018.01.125 ↗
14. Preparation, ablation behavior and thermal retardant ability of C/C-HfB2-SiC composites10.1016/j.matdes.2017.07.041 ↗
15. Improving the flexural property and long-lasting anti-ablation performance of the CVD-HfC coating by in-situ growing HfC nanowires10.1016/j.ceramint.2019.08.143 ↗
16. Oxidation and ablation resistance of the ZrB2-CrSi2-Si/SiC coating for C/C composites at high temperature10.1016/j.jallcom.2015.12.011 ↗
17. Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites10.1016/j.ceramint.2020.01.006 ↗
18. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications: a review10.1016/j.jmst.2016.08.004 ↗
19. Material property requirements for analysis and design of UHTC components in hypersonic applications10.1016/j.jeurceramsoc.2010.01.026 ↗
20. Structural design and ablation performance of ZrB2/MoSi2 laminated coating for SiC coated carbon/carbon composites10.1016/j.jeurceramsoc.2019.09.046 ↗
21. Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites10.1016/j.ceramint.2020.01.006 ↗
22. Ablation mechanism and properties of SiO2 modified ZrB2-SiC coatings fabricated on C/C composites via plasma spraying technology10.1016/j.surfcoat.2019.125132 ↗
23. Oxidation mechanism and resistance of ZrB2-SiC composites10.1016/j.corsci.2009.07.005 ↗
24. Effect of monolithic LaB6 on the ablation resistance of ZrC/SiC coating prepared by supersonic plasma spraying for C/C composites10.1016/j.jmst.2016.06.019 ↗
25. Multiple ablation resistance of La2O3/Y2O3-doped C/SiC-ZrC composites10.1016/j.ceramint.2015.06.126 ↗
26. Effects of Re2O3 (Re = La, Nd, Y and Yb) addition in hot-pressed ZrB2-SiC ceramics10.1016/j.jeurceramsoc.2009.04.021 ↗
27. Microstructure and ablation properties of La2O3 modified C/C-SiC composites prepared via precursor infiltration pyrolysis10.1016/j.jeurceramsoc.2018.11.041 ↗
28. In situ formation of oxidation resistant refractory coatings on SiC-reinforced ZrB2 ultra high temperature ceramics10.1111/j.1551-2916.2011.05032.x ↗
29. Improved oxidation resistance of zirconium carbide at 1500° C by lanthanum hexaboride additions10.1111/j.1551-2916.2011.04830.x ↗
30. A ZrC-SiC/ZrC-LaB6/ZrC multilayer ablation resistance coating for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2016.12.010 ↗
31. Self-healing YSZ-La-Mo-Si heterogeneous coating fabricated by plasma spraying to protect carbon/carbon composites from oxidation10.1016/j.compositesb.2017.05.078 ↗
32. Effect of La2O3 addition on long-term oxidation kinetics of ZrB2-SiC and HfB2-SiC ultra-high temperature ceramics10.1016/j.jeurceramsoc.2014.06.004 ↗
33. La2O3-modified YSZ coatings: high-temperature stability and improved thermal barrier properties10.1016/j.surfcoat.2008.09.032 ↗
34. Evaluation of rare-earth modified ZrB2-SiC ablation resistance using an oxyacetylene torch10.1111/jace.12991 ↗
35. Thermal cycle behavior of plasma sprayed La2O3, Y2O3 stabilized ZrO2 coatings10.1016/j.scriptamat.2006.03.015 ↗
36. The addition of lanthanum hexaboride to zirconium diboride for improved oxidation resistance10.1016/j.scriptamat.2007.07.036 ↗
37. Ablation behavior of ZrC-La2O3 coating for SiC-coated carbon/carbon composites under an oxyacetylene torch10.1016/j.ceramint.2016.06.045 ↗
38. Oxidation and ablation protection of plasma sprayed LaB6-MoSi2-ZrB2 coating for carbon/carbon composites10.1016/j.corsci.2019.01.043 ↗
39. Ablation resistance of HfC-SiC coating prepared by supersonic atmospheric plasma spraying for SiC-coated C/C composites10.1016/j.ceramint.2015.11.161 ↗
40. High temperature oxidation resistance of La2O3-modified ZrB2-SiC coating for SiC-coated carbon/carbon composites10.1016/j.jallcom.2018.06.230 ↗
41. Effect of LaB6 content on the gas evolution and structure of ZrC coating for carbon/carbon composites during ablation10.1016/j.ceramint.2016.11.197 ↗
42. Fabrication of La2Zr2O7 ceramic fibers via electrospinning method using different La2O3 precursors10.1016/j.ceramint.2016.07.086 ↗