Rheology and thermomechanical evaluation of additively manufactured acrylonitrile butadiene styrene (ABS) with optimized tungsten carbide (WC) nano-ceramic content
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Polymer materials reinforced with silicon nitride particles for 3D printing10.1007/s11106-021-00189-2 ↗
2. Development of new metal/polymer materials for rapid tooling using Fused deposition modelling10.1016/j.matdes.2004.02.009 ↗
3. Enhanced moderate electric field dielectric energy storage performance in (Bi0.5Na0.5)TiO3-based lead-free ceramics10.1016/j.ceramint.2022.08.272 ↗
4. Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers10.1016/j.jeurceramsoc.2012.10.006 ↗
5. Fused filament fabrication of small ceramic components10.3390/ma11081463 ↗
6. Optimization of the cutting edge radius of PVD coated inserts in milling considering film fatigue failure mechanisms10.1016/S0257-8972(00)00971-3 ↗
7. Fatigue fracture investigation of cemented carbide tools in gear hobbing, Part 2: the effect of cutting parameters on the level of tool stresses—a quantitative parametric analysis10.1115/1.1511173 ↗
8. Characterization of mechanical properties of aluminium/tungsten carbide composites10.1016/j.measurement.2017.01.045 ↗
9. The wear behaviour of composite materials with epoxy matrix filled with hard powder10.1023/A:1011234301664 ↗
10. Erosive wear behaviour of WC filled glass epoxy composites10.1016/j.proeng.2013.12.241 ↗
11. Specific energy absorption during compression testing of ABS and FPU parts fabricated using LCD-SLA based 3D printer10.1108/RPJ-04-2021-0075 ↗
12. Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers10.1016/j.jmrt.2023.01.086 ↗
13. Mechanical reinforcement of ABS with optimized nano titanium nitride content for material extrusion 3D printing10.3390/nano13040669 ↗
14. Sustainable additive manufacturing: mechanical response of acrylonitrile-butadiene-styrene over multiple recycling processes10.3390/su12093568 ↗
15. Fused deposition modelling approach using 3D printing and recycled industrial materials for a sustainable environment: a review10.1007/s00170-022-10048-y ↗
16. The effect of printing orientation on the mechanical properties of FDM 3D printed parts BT - enabling
17. On the strain rate sensitivity of abs and abs plus fused deposition modeling parts10.1007/s11665-016-2198-x ↗
18. Tensile, creep, and fatigue behaviors of 3D-printed acrylonitrile butadiene styrene10.1007/s11665-017-2961-7 ↗
19. A statistical approach of the flexural strength of PLA and ABS 3D printed parts, engineering10.48084/etasr.4739 ↗
20. Can a black-box AI replace costly DMA testing?—a case study on prediction and optimization of dynamic mechanical properties of 3D printed acrylonitrile butadiene styrene10.3390/ma15082855 ↗
21. A parametric determination of bending and Charpy's impact strength of ABS and ABS-plus fused deposition modeling specimens10.1007/s40964-019-00092-8 ↗
22. Effect of reinforcements and 3-D printing parameters on the microstructure and mechanical properties of acrylonitrile butadiene styrene (ABS) polymer composites10.3390/polym14102105 ↗
23. Fully 3D printed rolled capacitor based on conductive ABS composite electrodes10.1016/j.elecom.2021.107178 ↗
24. Influence of short glass fibre reinforcement on mechanical properties of 3D printed ABS-based polymer composites10.3390/polym14061182 ↗
25. Effect of short glass fiber addition on flexural and impact behavior of 3D printed polymer composites10.1021/acsomega.2c07227 ↗
26. Mechanical and electrical properties investigation of 3D-printed acrylonitrile–butadiene–styrene graphene and carbon nanocomposites10.1007/s11665-020-04689-x ↗
27. 3D printing of ABS Nanocomposites. Comparison of processing and effects of multi-wall and single-wall carbon nanotubes on thermal, mechanical and electrical properties10.1016/j.jmst.2021.11.064 ↗
28. Mechanical properties of particulate filled polymers10.1002/pc.750080208 ↗
29. Advances in 3D printing of thermoplastic polymer composites and nanocomposites10.1016/j.progpolymsci.2019.101162 ↗
30. Vidakis · 2021
31. Reactive laser synthesis of ultra-high-temperature ceramics HfC, ZrC, TiC, HfN, ZrN, and TiN for additive manufacturing10.1016/j.ceramint.2022.11.319 ↗
32. Production of different metal oxide nanoparticle embedded polymer matrix composite structures by the additive manufacturing technology and investigation of their properties10.1002/pc.26894 ↗
33. Effect of zinc oxide concentration on the dielectric properties of 3D printed acrylonitrile butadiene styrene nanocomposites
34. Optimizing the rheological and thermomechanical response of acrylonitrile butadiene styrene/silicon nitride nanocomposites in material extrusion additive manufacturing10.3390/nano13101588 ↗
35. Emmanouel Maravelakis, on the substantial mechanical reinforcement of Polylactic Acid with Titanium Nitride ceramic nanofillers in material extrusion 3D printing10.1016/j.ceramint.2023.02.001 ↗
36. Effect of WC and CeO2 on microstructure and properties of W–Cu electrical contact material10.1016/j.ijrmhm.2009.11.009 ↗
37. A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy10.1016/j.jallcom.2021.160645 ↗
38. The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials10.1016/0043-1648(74)90101-X ↗
39. Polypropylene–graft–maleic anhydride-nanocomposites: I—characterization and thermal stability of nanocomposites produced under nitrogen and in air10.1016/S0141-3910(03)00174-5 ↗
40. Raman spectroscopy of biological tissues10.1080/05704920701551530 ↗
41. Temperature studies of polycarbonate using Fourier transform Raman spectroscopy10.1007/BF00319235 ↗
42. Probing cellulose structures with vibrational spectroscopy10.1007/s10570-018-2199-z ↗
43. Raman spectroscopy from laboratory and proximal to remote sensing: a tool for the volcanological sciences
44. Raman and Photoluminescence spectroscopy of polycarbonate matrices irradiated with different energy 28Si+ ions10.1016/j.vacuum.2015.03.005 ↗
45. Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy10.1002/pen.25568 ↗
46. Nondestructive characterization of the polycarbonate - octadecylamine interface by surface enhanced Raman spectroscopy10.1016/j.polymertesting.2018.11.023 ↗
47. Diamond formation in carbonate-silicate-sulfide-carbon melts: Raman- and IR-microspectroscopy10.1127/0935-1221/2008/0020-1818 ↗
48. Influence of drinks on resin composite: evaluation of degree of cure and color change parameters10.1016/j.polymertesting.2006.12.005 ↗
49. Raman spectroscopy as spectral tool for assessing the degree of conversion after curing of two resin-based materials used in restorative dentistry10.3390/diagnostics12081993 ↗
50. Processability of poly(vinyl alcohol) based filaments with paracetamol prepared by hot-melt extrusion for additive manufacturing10.1016/j.xphs.2020.09.016 ↗
51. Study of nanoparticles aggregation/agglomeration in polymer particulate nanocomposites by mechanical properties10.1016/j.compositesa.2016.01.020 ↗
52. Effect of filler loading, geometry, dispersion and temperature on thermal conductivity of polymer nanocomposites10.1016/j.polymertesting.2016.11.015 ↗
53. Influence of nanoparticle size, loading, and shape on the mechanical properties of polymer nanocomposites10.1063/1.4767517 ↗
54. Rheology and applications of highly filled polymers: a review of current understanding10.1016/j.progpolymsci.2016.12.007 ↗
55. Strengthening acrylonitrile-butadiene-styrene (ABS) with nano-sized and micron-sized calcium carbonate10.1016/j.polymer.2004.11.001 ↗
56. Linear and nonlinear melt rheology and extrudate swell of acrylonitrile-butadiene-styrene and organoclay-filled acrylonitrile-butadiene-styrene nanocomposite10.1002/pen.21769 ↗
57. Rheology of rubber-modified polymer melts10.1002/pen.760210503 ↗
58. FDM printability of PLA based-materials: the key role of the rheological behavior10.3390/polym14091754 ↗
59. The effect of agglomeration on the electrical and mechanical properties of polymer matrix nanocomposites reinforced with carbon nanotubes10.3390/polym14091842 ↗
60. Influence of nanoparticles from waste materials on mechanical properties, durability and microstructure of UHPC10.3390/ma13204530 ↗
61. Tuning the agglomeration and combustion characteristics of aluminized propellants via a new functionalized fluoropolymer10.1016/j.cej.2019.122987 ↗
62. Creep performance of CNT polymer nanocomposites -An emphasis on viscoelastic interphase and CNT agglomeration10.1016/j.compositesb.2018.12.093 ↗
63. Effect of nano-clay de-agglomeration on mechanical properties of concrete10.1016/j.conbuildmat.2019.02.018 ↗
64. Nanocomposites derived from polymers and inorganic nanoparticles10.3390/ma3063654 ↗
65. Photo-oxidation of polymeric-inorganic nanocomposites: chemical, thermal stability and fire retardancy investigations10.1016/S0141-3910(01)00061-1 ↗
66. Significance of tungsten carbide filler reinforcement on ultimate tensile strength of basalt fiber epoxy composites
67. Evaluating the tribological and mechanical properties of filament wound composite incorporated with PTFE fibers and tungsten carbide filler applicable for self-lubricating bearings
68. Optimizing the rheological and thermomechanical response of acrylonitrile butadiene styrene/silicon nitride nanocomposites in material extrusion additive manufacturing10.3390/nano13101588 ↗
69. Chemically modified bamboo fiber/ABS composites for high-quality additive manufacturing10.1038/s41428-021-00540-9 ↗
70. Optimizing 3D printing performance of acrylonitrile-butadiene-styrene composites with cellulose nanocrystals/silica nanohybrids10.1002/pi.5824 ↗
71. Investigation of ABS-rice straw composite feedstock filament for FDM10.1108/RPJ-11-2017-0242 ↗