Investigation of microstructure and mechanical properties of Cu/Ti–B–SiCp hybrid composites
Source abstract
Abstract
Abstract In this study, Cu/Ti–B-SiCp hybrid composite materials were produced by powder metallurgy method using three different sintering temperatures (950, 1000, 1050 °C). The optimum sintering temperature of Cu main matrix composites reinforced with Ti–B-SiCp reinforcement materials at 2-4-6-8 wt.% were determined and their microstructure and mechanical properties were investigated. As a result of microstructure studies, it was determined that reinforcement elements have a homogeneous interface in the main matrix. The hardness of the produced composites was determined by the Brinell hardness method. The highest hardness value (77.74 HB) was determined in the sample with 6 wt% reinforcement ratio. In the tensile and three point bending tests, maximum strength values (112.96 MPa, 37.76 MPa) were found in samples with a reinforcement ratio of 4 wt%. It was determined that increasing reinforcement ratios and sintering temperature made a positive contribution to the hybrid composite materials produced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Physical properties of copper based MMC strengthened with alumina10.2478/afe-2014-0042 ↗
2. Effect of high-pressure torsion processing on the microstructure evolution and mechanical properties of consolidated micro size Cu and Cu-SiC powders10.1016/j.apt.2017.05.020 ↗
3. Experimental study and analysis of machinability characteristics of metal matrix composites during drilling10.1016/j.compositesb.2019.02.023 ↗
4. Effect of particle size and volume fraction of the reinforcement on the microstructure and mechanical properties of friction welded MMC to AA 6061 aluminum alloy10.4149/km_2013_4_221 ↗
5. Different ratios CrC particle-reinforced Cu matrix composite materials and investigation of wear performance
6. Microstructural evolution of hybrid aluminum matrix composites reinforced with SiC nanoparticles and graphene/graphite prepared by powder metallurgy10.1016/j.pnsc.2020.01.024 ↗
7. Surface modification of AISI 304 stainless steel with NiBSi-SiC composite by TIG method10.1007/s11665-020-05378-5 ↗
8. Experimental analysis of Al-Cu-Si metal matrix composite by powder-metallurgy process10.1016/j.matpr.2020.08.643 ↗
9. Modeling adhesive wear resistance of Al-Si-Mg/SiCp P/M compacts fabricated by hot pressing process, by means of ANN10.1007/s00170-007-1000-5 ↗
10. Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in-situ tensile test and microstructure characterization10.1016/j.jallcom.2020.156555 ↗
11. Microstructural, tribological and compression behaviour of Copper matrix reinforced with Graphite-SiC hybrid composites10.1016/j.matchemphys.2020.123090 ↗
12. Microstructure and thermo-physical properties of Cu-Ti double-layer coated diamond/Cu composites fabricated by spark plasma sintering10.1016/j.diamond.2020.108041 ↗
13. Electrical conductivity, microstructure and wear properties of Cu-Mo coatings
14. Parametric optimization for improving the machining process of Cu/Mo-SiCp composites produced by powder metallurgy10.3390/ma14081921 ↗
15. Investigation of characteristics of Cu based, Co-CrC reinforced composites produced by powder metallurgy method10.1016/j.apt.2021.04.009 ↗
16. Enhanced electrical conductivity and hardness of Copper/Carbon Nanotubes composite by tuning the interface structure10.1016/j.matlet.2020.128564 ↗
17. Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles10.1016/j.msea.2013.01.010 ↗
18. Effect of Cr particulate reinforcements in different ratios on wear performance and mechanical properties of Cu matrix composites10.1007/s40430-018-1130-8 ↗
19. Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites10.1007/s00170-021-06889-8 ↗
20. Investigation of mechanical properties of Cu/Mo-SiCp composites produced with P/M, and their wear behaviour with the Taguchi method
21. Preparation, structure and properties of copper-based composites with additions of fullerenes and fullerene soot10.1007/s11041-020-00514-3 ↗
22. Tribological behavior of Cu matrix composites containing graphite and tungsten disulfide10.1080/10402004.2014.931499 ↗
23. Effect of post-heat treatment on microstructure and mechanical properties of Cu-Fe-Co powder alloy fabricated by hot pressing
24. Synthesis and properties of “reduced graphene oxide–copper” composites produced by the method of repeated pressing and sintering10.1007/s11041-019-00434-x ↗
25. Effect of nano Al2O3 coated Ag reinforced Cu matrix nanocomposites on mechanical and tribological behavior synthesis by P/M technique10.1177/0021998320934860 ↗
26. Microstructure, mechanical properties and wear performance of WC/brass composites produced by pressureless and spark plasma sintering processes10.1007/s12540-019-00564-0 ↗
27. The effect of porosity and Cu rate on microstructure and mechanical properties of Co alternative powder metallurgy compound10.2298/SOS1703225C ↗
28. Copper matrix composites reinforced by rGO-MoS2 hybrid: strengthening effect to enhancement of tribological properties10.1016/j.compositesb.2019.106931 ↗
29. Analysis of the micromechanical properties of copper-silicon carbide composites using nanoindentation measurements10.1016/j.ceramint.2019.01.257 ↗
30. The in-situ synthesis of TiC in Cu melts based on Ti–C–Si system and its mechanism10.1016/j.matdes.2019.108007 ↗
31. A novel mixing method for powder metallurgy copper‐carbon nanotube composites10.1002/mawe.201900149 ↗
32. Characterization of Cu–Ti powder metallurgical materials10.1007/s12613-017-1381-x ↗
33. Microstructure and mechanical effects of Co–Ti powder particles on Cu matrix composites10.3103/S1067821221010077 ↗
34. The effect of trace amount of Ti and W on the powder metallurgy process of Cu10.1016/j.jallcom.2015.11.140 ↗
35. The braking behaviors of Cu-Based powder metallurgy brake pads mated with C/C–SiC disk for high-speed train10.1016/j.wear.2020.203237 ↗
36. Microstructure and thermal properties of Cu-SiC composite materials depending on the sintering technique10.2298/SOS1701011C ↗
37. SiC content effect on the properties of Cu–SiC composites produced by mechanical alloying10.1016/j.jallcom.2015.01.298 ↗
38. The introduction of SiC into Cu melts based on Ti–SiC system and its transformation10.1016/j.jmrt.2020.01.039 ↗
39. Synergistic role of carbon nanotube and SiCn reinforcements on mechanical properties and corrosion behavior of Cu-based nanocomposite developed by flake powder metallurgy and spark plasma sintering process10.1016/j.msea.2020.139395 ↗
40. Effect of boron on the microstructure and properties of graphite flakes/copper composites fabricated by vacuum hot pressing10.1016/j.jallcom.2019.152425 ↗
41. Research on the properties of boron carbide particle-reinforced copper-matrix/graphite self-lubricating composite materials10.3103/S1067821219030167 ↗
42. Experimental investigation on the mechanical, structural and thermal properties of Cu–ZrO2 nanocomposites hybridized by graphene nanoplatelets10.1016/j.ceramint.2019.12.172 ↗
43. Effect of La addition on microstructures and properties of TiB2(-TiB)/Cu hybrid composites prepared by in situ reaction10.1016/j.msea.2020.139605 ↗
44. Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering10.1016/j.jallcom.2020.156120 ↗
45. Effect of temperature on morphology and wear of a Cu-Ti-TiC MMC sintered by abnormal glow discharge10.1088/2053-1591/ab6e3b ↗
46. Mechanosynthesıs of Mmc Cu-C doped wıth Ti for applıcatıon of Pantograph contact strıp (Pcs)
47. Tailoring interface structure and enhancing thermal conductivity of Cu/diamond composites by alloying boron to the Cu matrix10.1016/j.matchar.2019.04.015 ↗
48. Interphase layer characteristics and thermal conductivity of hot-forged Cu-B/diamond composites
49. Mechanical properties of Cu-B/diamond composites prepared by gas pressure infiltration10.1007/s11665-020-04790-1 ↗
50. Synergistic strengthening effect of carbon nanotubes (CNTs) and titanium diboride (TiB2) microparticles on mechanical properties of copper matrix composites10.1016/j.jmrt.2020.05.036 ↗
51. Effect of sintering temperature on grain growth and mechanical properties of copper/graphene nanosheet composite10.1016/j.diamond.2020.108111 ↗
52. Production and characterization of boron carbide and silicon carbide reinforced copper-nickel composites by powder metallurgy method10.1002/mawe.202000077 ↗
53. Microstructure and tribological properties of in-situ TiC-C/Cu nanocomposites synthesized using different carbon sources (graphite, carbon nanotube and graphene) in the Cu-Ti-C system10.1016/j.ceramint.2018.08.316 ↗
54. Comparative study on the mechanical, tribological, morphological and structural properties of vortex casting processed, Al–SiC–Cr hybrid metal matrix composites for high strength wear-resistant applications: fabrication and characterizations10.1016/j.jmrt.2020.10.001 ↗
55. Microstructure and mechanical properties of Cu matrix composites reinforced by TiB2/TiN ceramic reinforcements10.1007/s40195-020-01100-5 ↗
56. Slow strain rate tensile tests on notched specimens of as-cast pure Cu and Cu–Fe–Co alloys10.1016/j.jallcom.2020.153647 ↗
57. Evaluation of interface structure and high-temperature tensile behavior in Cu/Al8011/Al5052 trilayered composite10.1016/j.msea.2020.140129 ↗
58. Analysis of the influence of sulfur on the hot tensile fracture of C71500 Cu-Ni alloy10.1007/s11665-020-05381-w ↗
59. Microstructural and mechanical properties of Cu-based Co-Mo-reinforced composites produced by the powder metallurgy method10.1007/s11665-020-05309-4 ↗
60. Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite10.1016/j.msea.2019.138350 ↗
61. Microstructure and mechanical properties of Cu-12Al-6Ni with Ti addition prepared by powder metallurgy10.1016/j.msea.2020.140472 ↗
62. Enhancing mechanical properties of pure copper-based materials with CrxOy nanoparticles and CNT hybrid reinforcement10.1007/s10853-020-05440-6 ↗
63. Enhancing mechanical and combustion performance of boron/polymer composites via boron particle functionalization10.1021/acsami.1c06727 ↗
64. Microstructure and mechanical properties of vacuum brazed CBN abrasive segments with tungsten carbide reinforced Cu–Sn–Ti alloys10.1016/j.ceramint.2019.03.181 ↗
65. Effects of TiC content on transverse rupture strength (TRS) of Cu-TiC composites produced using powder metallurgy (P/M) technique