Co-reinforcing of ZrB2–SiC ceramics with optimized ZrC to Cf ratio
Source abstract
Abstract
Abstract Characteristics of ZrB2–SiC ultrahigh temperature ceramic matrix composites (UHTCMCs) reinforced with ZrC and carbon fiber (Cf) were investigated in this article. Spark plasma sintering (SPS) process was utilized to fabricate the samples at 1800 °C for 5 min under 30 MPa punch pressure and vacuumed atmosphere. In all samples, the volume ratio of ZrB2: SiC was equal to 4:1, and the summation of ZrC and Cf reinforcements was 7.5 vol% with different ZrC: Cf ratios. Field emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), densitometry, flexural strength, and hardness measurements were employed for characterization of the prepared samples. Microstructural inspection revealed the formation of SiC sheath around the carbon fibers due to several reactions in the surface SiO2 layers existed on the SiC particles. Optimal flexural strength (628.4 MPa) and hardness (20.8 GPa) values were achieved for the sample co-reinforced with 6.5 vol% ZrC and 1 vol% Cf, with a relative density of 97.7%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Influence of SiAlON addition on the microstructure development of hot-pressed ZrB2–SiC composites10.1016/j.ceramint.2020.04.258 ↗
2. A review on the Comsol Multiphysics studies of heat transfer in advanced ceramics
3. Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics10.1016/j.ceramint.2019.11.027 ↗
4. Solid solution formation during spark plasma sintering of ZrB2–TiC–graphite composites
5. A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB210.1016/j.ceramint.2019.08.112 ↗
6. The effect of thermal contact resistance on the temperature distribution in a WC made cutting tool10.1016/j.ceramint.2019.07.241 ↗
7. Spark plasma sintering of Al-doped ZrB2–SiC composite10.1016/j.ceramint.2018.11.098 ↗
8. Heat transfer and pressure drop in a ZrB2 microchannel heat sink: a numerical approach
9. Nano-diamond reinforced ZrB2–SiC composites10.1016/j.ceramint.2020.01.008 ↗
10. Numerical analyses of heat transfer and thermal stress in a ZrB2 gas turbine stator blade10.1016/j.ceramint.2019.05.344 ↗
11. TiB2–SiC-based ceramics as alternative efficient micro heat exchangers10.1016/j.ceramint.2019.06.150 ↗
12. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade10.1016/j.ceramint.2019.06.184 ↗
13. A numerical approach to the heat transfer in monolithic and SiC reinforced HfB2, ZrB2 and TiB2 ceramic cutting tools10.1016/j.ceramint.2019.05.095 ↗
14. Mechanical and thermal properties of bulk ZrB210.1016/j.jnucmat.2015.10.024 ↗
15. Microstructure and high-temperature strength of textured and non-textured ZrB2 ceramics10.1088/1468-6996/15/1/014202 ↗
16. Fabrication and mechanical properties of ZrB2-SiC composites toughened by interlocking microstructure and chopped carbon fiber10.15541/jim20180557 ↗
17. Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure10.1016/j.jallcom.2014.09.006 ↗
18. Mechanical, tribological and thermal properties of hot pressed ZrB2–SiC composite with SiC of different morphology10.1179/1743676114Y.0000000189 ↗
19. Effect of short carbon fiber addition on pressureless densification and mechanical properties of ZrB2–SiC–Csf nanocomposite10.1016/j.ijrmhm.2015.04.005 ↗
20. Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites10.1016/j.ceramint.2017.08.030 ↗
21. Fabrication and properties of ZrC–ZrB2–SiC composites by spark plasma sintering10.2109/jcersj2.123.607 ↗
22. Effect of composition on spark plasma sintering of ZrB2–SiC–ZrC nanocomposite synthesized by MASPSyn10.1016/j.ceramint.2016.09.118 ↗
23. Reactive spark plasma sintering and mechanical properties of ZrB2-SiC-ZrC composites from ZrC-B4C-Si system10.1016/j.ceramint.2018.02.035 ↗
24. Spark Plasma Sintering of ZrB2–SiC–ZrC ultra-high temperature ceramics at 1800°C10.1016/j.msea.2011.04.026 ↗
25. Reactive hot pressing of ZrB2-SiC-ZrC ultra high-temperature ceramics at 1800oC10.1111/j.1551-2916.2006.01145.x ↗
26. Spark plasma sintering of quadruplet ZrB2–SiC–ZrC–Cf composites
27. Triplet carbide composites of TiC, WC, and SiC10.1016/j.ceramint.2019.12.155 ↗
28. Characterization of spark plasma sintered TiC ceramics reinforced with graphene nano-platelets10.1016/j.ceramint.2020.04.189 ↗
29. Effect of B4C content on sintering behavior, microstructure and mechanical properties of Ti-based composites fabricated via spark plasma sintering10.1016/j.matchemphys.2020.123087 ↗
30. Microstructural and mechanical characterization of spark plasma sintered TiC ceramics with TiN additive10.1016/j.ceramint.2020.04.215 ↗
31. Influence of TiB2 content on the properties of TiC–SiCw composites10.1016/j.ceramint.2019.11.236 ↗
32. Role of nano-WC addition on microstructural, mechanical and thermal characteristics of TiC–SiCw composites10.1016/j.ijrmhm.2020.105248 ↗
33. A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics10.1016/j.ceramint.2020.03.148 ↗
34. Pressureless sintering of ZrB2 ceramics codoped with TiC and graphite10.1016/j.ijrmhm.2019.02.026 ↗
35. Hot pressing and oxidation behavior of ZrB2–SiC–TaC composites
36. Characterization of hot-pressed Ti3SiC2–SiC composites10.1016/j.ijrmhm.2020.105232 ↗
37. Investigation of hot pressed ZrB2–SiC–carbon black nanocomposite by scanning and transmission electron microscopy10.1016/j.ceramint.2019.05.211 ↗
38. Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: densification behavior10.1016/j.ceramint.2015.03.033 ↗
39. Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part II: mechanical behavior10.1016/j.ceramint.2015.10.166 ↗
40. Characterization of triplet Ti–TiB–TiC composites: comparison of in-situ formation and ex-situ addition of TiC10.1016/j.ceramint.2020.01.204 ↗
41. Influence of SPS temperature on the properties of TiC–SiCw composites
42. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide10.1016/j.ceramint.2019.11.262 ↗
43. Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition10.1016/j.ceramint.2020.01.291 ↗
44. Strengthening of novel TiC–AlN ceramic with in-situ synthesized Ti3Al intermetallic compound10.1016/j.ceramint.2020.02.213 ↗
45. Spark plasma sintering of TiAl–Ti3AlC2 composite10.1016/j.ceramint.2018.08.272 ↗
46. Densification behavior and microstructure development in TiB2 ceramics doped with h-BN10.1016/j.ceramint.2020.04.223 ↗
47. Hybrid Ti matrix composites with TiB2 and TiC compounds10.1016/j.mtcomm.2019.100576 ↗
48. Influence of TiN dopant on microstructure of TiB2 ceramic sintered by spark plasma
49. Influence of sintering temperature on microstructure and mechanical properties of Ti–Mo–B4C composites
50. Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
51. On the simulation of spark plasma sintered TiB2 ultra high temperature ceramics: a numerical approach10.1016/j.ceramint.2020.03.003 ↗
52. Role of nano-diamond addition on the characteristics of spark plasma sintered TiC ceramics10.1016/j.diamond.2020.107828 ↗
53. Spark plasma sintering of TiN ceramics codoped with SiC and CNT10.1016/j.ceramint.2018.10.223 ↗
54. Microstructure–mechanical properties correlation in spark plasma sintered Ti–4.8 wt.% TiB2 composites10.1016/j.matchemphys.2018.11.057 ↗
55. Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC10.1016/j.ceramint.2018.10.125 ↗
56. Thermal diffusivity and microstructure of spark plasma sintered TiB2-SiC-Ti composite10.1016/j.ceramint.2019.01.141 ↗
57. Experimental investigation of heat transfer and pressure drop in a minichannel heat sink using Al2O3 and TiO2–water nanofluids10.1007/s40430-020-02403-5 ↗
58. Characteristics of quadruplet Ti–Mo–TiB2–TiC composites prepared by spark plasma sintering10.1016/j.ceramint.2020.05.137 ↗
59. Numerical assessment of beryllium oxide as an alternative material for micro heat exchangers10.1016/j.ceramint.2020.04.263 ↗
60. Magnetic CoFe2O4 nanoparticles doped with metal ions: a review10.1016/j.ceramint.2020.04.202 ↗
61. Hydroxyapatite consolidated by zirconia: applications for dental implant
62. Synthesis and morphology optimization of electrospun SiBNC nanofibers
63. Mathematical modeling of absorption accompanied by a non-elementary reversible chemical reaction10.1016/j.cherd.2020.02.030 ↗
64. Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: a numerical study10.1016/j.ceramint.2020.01.195 ↗
65. Effects of carbon additives on the properties of ZrB2–based composites: a review10.1016/j.ceramint.2018.01.214 ↗
66. Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing10.1016/j.ceramint.2015.09.165 ↗
67. Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black10.1016/j.ceramint.2017.03.188 ↗
68. Monteverde · 2010 · 261
69. Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride
70. Spark plasma sintering of TiC–SiCw ceramics10.1016/j.ceramint.2019.06.236 ↗
71. Reactive spark plasma sintering of TiB2–SiC–TiN novel composite10.1016/j.ijrmhm.2019.02.022 ↗
72. Preparation of mullite-TiB2-CNTs hybrid composite through spark plasma sintering10.1016/j.ceramint.2019.05.154 ↗
73. Mechanical and physical behavior of spark plasma sintered ZrC–ZrB2–SiC composites10.1016/j.jeurceramsoc.2007.08.009 ↗
74. Effects of ZrB2 reinforcement on microstructure and mechanical properties of a spark plasma sintered mullite-CNT composite10.1016/j.ceramint.2019.05.113 ↗
75. Effect of TiB2 addition on the elevated temperature tribological behavior of spark plasma sintered Ti matrix composite10.1016/j.compositesb.2019.05.073 ↗
76. Particle rearrangement and pore space coarsening during solid-state sintering10.1111/j.1551-2916.2009.02978.x ↗
77. Co-reinforcing of mullite-TiN-CNT composites with ZrB2 and TiB2 compounds10.1016/j.ceramint.2019.07.072 ↗
78. Influence of vanadium content on the characteristics of spark plasma sintered ZrB2–SiC–V composites10.1016/j.jallcom.2019.07.117 ↗
79. Nanoindentation and nanostructural characterization of ZrB2–SiC composite doped with graphite nano-flakes10.1016/j.compositesb.2019.107153 ↗
80. Spark plasma sintering of ZrB2-based composites co-reinforced with SiC whiskers and pulverized carbon fibers10.1016/j.ijrmhm.2019.104989 ↗
81. Microstructural, thermal and mechanical characterization of TiB2–SiC composites doped with short carbon fibers10.1016/j.ijrmhm.2019.04.005 ↗
82. Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers10.1016/j.diamond.2020.107786 ↗
83. Advantages and disadvantages of graphite addition on the characteristics of hot-pressed ZrB2–SiC composites
84. Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I: densification behavior10.1016/j.ceramint.2015.11.139 ↗
85. Processing and characterization of Cf/ZrB2-SiC-ZrC composites produced at moderate pressure and temperature10.1016/j.ceramint.2016.11.073 ↗
86. The reduction of silica with carbon and silicon carbide10.1111/j.1151-2916.1979.tb19041.x ↗
87. Equilibrium phase relationship between SiC and a liquid phase in the Fe-Si-C system at 1523–1723 K10.2320/matertrans.MRA2008404 ↗
88. Barin · 1995
89. SiO 2 +SiC reaction at elevated temperatures. Part 1.—kinetics and mechanism10.1039/TF9666202499 ↗
90. Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites10.1016/j.ceramint.2020.01.192 ↗
91. SiO vapor pressure in an SiO2 glass/Si melt/SiO gas equilibrium system10.1143/JJAP.38.L1153 ↗
92. Vapor pressure of silicon monoxide10.1021/je800560b ↗
93. Calculated solubilities of oxygen in liquid and solid silicon10.1149/1.2109053 ↗
94. Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis10.1016/j.ceramint.2020.01.279 ↗
95. Phase transformation in spark plasma sintered ZrB2–V–C composites at different temperatures
96. Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part II: grain growth10.1016/j.ceramint.2016.08.205 ↗
97. Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2–SiC composite10.1016/j.ceramint.2020.04.292 ↗
98. A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering10.1016/j.msea.2018.06.008 ↗
99. Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives10.1016/j.ceramint.2020.02.156 ↗
100. A novel ZrB2–C3N4 composite with improved mechanical properties10.1016/j.ceramint.2019.07.144 ↗