High-temperature tribological behaviors of MoAlB ceramics sliding against Al2O3 and Inconel 718 alloy
Source abstract
Abstract
Abstract In this work, the friction and wear properties of layered MoAlB ceramics sliding against Al2O3 and Inconel 718 alloy (Inc718) from room temperature (RT) to 800 °C were studied. The tribological behaviors of MoAlB ceramics are found to be greatly influenced by the test temperature and the counterpart. From RT to 800 °C, the MoAlB/Al2O3 tribo-pairs exhibit a higher friction coefficient and wear rate compared with those of the MoAlB/Inc718 tribo-pairs. Irrespective of the laminate structure, the tribological properties of MoAlB ceramics are associated with the oxides that are induced by tribo-oxidation reactions. For the MoAlB/Al2O3 tribo-pairs, abrasive wear and adhesive wear are responsible for the poor friction and wear behaviors. However, the tribo-film, which consists of oxides of Ni, Cr and Fe, can provide a good lubrication effect when MoAlB slides against Inc718.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
2. Tribological characteristics of SiC ceramics sintered with a small amount of yttria10.1016/j.ceramint.2015.07.210 ↗
3. Fabrication of hydrophobic Ti3SiC2 surface with micro-grooved structures by wire electrical discharge machining10.1016/j.ceramint.2018.07.032 ↗
4. Elastic and mechanical properties of the MAX phases
5. The Mn+1AXn phases: materials science and thin-film processing10.1016/j.tsf.2009.07.184 ↗
6. Effect of counterface on the tribological behavior of Ti3AlC2 at ambient10.1007/s11249-013-0269-9 ↗
7. On the tribology of the MAX phases and their composites during dry sliding: a review10.1016/j.wear.2011.01.043 ↗
8. High temperature tribological properties of Ti3AlC2 ceramic against SiC under different atmospheres10.1016/j.matdes.2014.11.043 ↗
9. Strengthening of Ti3AlC2 by incorporation of Al2O310.1016/j.scriptamat.2003.12.002 ↗
10. Tribological properties of polycrystalline Ti3SiC2 and Al2O3-reinforced Ti3SiC2 Composites10.1111/j.1551-2916.2006.01253.x ↗
11. X-ray photoelectron spectroscopy of the MAB phases, MoAlB, M2AlB2 (M = Cr, Fe), Cr3AlB4 and their binary monoborides10.1016/j.jeurceramsoc.2019.09.040 ↗
12. A progress report on the MAB phases: atomically laminated, ternary transition metal borides
13. Synthesis and characterization of an alumina forming nanolaminated boride: MoAlB10.1038/srep26475 ↗
14. Synthesis, microstructure and properties of MoAlB ceramics10.1016/j.ceramint.2018.04.177 ↗
15. Compressive deformation of MoAlB up to 1100 oC
16. Thermal shock behavior of a nanolaminated ternary boride: MoAlB10.1016/j.ceramint.2018.08.071 ↗
17. Friction and wear properties of MoAlB against Al2O3 and 100Cr6 steel counterparts10.1016/j.jeurceramsoc.2018.10.026 ↗
18. Isothermal and cyclic oxidation of MoAlB in air from 1100 oC to 1400 oC10.1149/2.1891713jes ↗
19. Synthesis and oxidation resistance of MoAlB single crystals10.1016/j.ceramint.2018.10.170 ↗
20. A crystal-chemical approach to lubrication by solid oxides10.1023/A:1019183101329 ↗
21. Tribological behaviour of self-lubricating materials at high temperatures10.1080/09506608.2017.1410944 ↗
22. Single crystal growth of (MoXCr1−X)AlB and (MoXW1−X)AlB by metal Al solutions and properties of the crystals10.1006/jssc.1997.7313 ↗
23. Synthesis of MoAlB particulates and their porous derivatives by selective deintercalation of Al from MoAlB
24. Synthesis, microstructure and mechanical properties of a MoAlB ceramic Prepared by spark plasma sintering from elemental powders10.1016/j.ceramint.2019.08.060 ↗
25. Microstructure and mechanical properties of porous Ti3SiC210.1016/j.actamat.2005.05.034 ↗
26. Fabrication and high-temperature tribological properties of self-lubricating NiCr-BaMoO4 Composites10.1016/j.wear.2015.01.063 ↗
27. Ta2AlC and Cr2AlCAg-based composites - new solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina10.1016/j.wear.2007.01.028 ↗
28. Lubricating behavior of adaptive nickel alloy matrix composites with multiple solid lubricants from 25 oC to 700 oC10.1016/j.triboint.2016.12.030 ↗
29. Orthorhombic boron oxide under pressure: in situ study by X-ray diffraction and Raman scattering10.1063/1.4966658 ↗
30. Raman microspectroscopy of some iron oxides and oxyhydroxides10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
31. Raman spectroscopic study of magnetite (FeFe2O4): a new assignment for the vibrational spectrum10.1016/S0022-4596(03)00294-9 ↗
32. Oxide scale stress determination by Raman spectroscopy application to the NiCr/Cr2O3 system and influence of yttrium10.1016/S1359-6462(98)00079-7 ↗
33. Structural, optical and magnetic properties of NiO nanopowders10.1166/jnn.2018.15301 ↗