Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids
Source abstract
Abstract
Abstract The grinding of Si 3 N 4 ceramics is difficult due to their inherent hardness, brittleness, and machining-induced damages. The effects of environmentally friendly mono and hybrid nanofluids are investigated on grinding forces, specific grinding energy, grinding force ratio, surface integrity and surface/sub-surface damages during grinding of Si 3 N 4 ceramics. The experimental results indicated superior lubrication properties of MoS 2 nanoparticles based nanofluids. The reduction in normal grinding force and specific grinding energy for MoS 2 – WS 2 hybrid nanofluids has been 27% and 39% respectively, compared to deionized water base fluid. The surface roughness and chipping layer depth of silicon nitride workpieces using MoS 2 – WS 2 hybrid nanofluid have been reduced by 41% and 86% in comparison to flood grinding. The thermally stable oxides on ground surface attributed to grindabilty improvement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions10.1016/j.ijmachtools.2017.06.003 ↗
2. Effects of grinding parameters on surface quality in silicon nitride grinding10.1016/j.ceramint.2016.10.135 ↗
3. Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics10.1016/j.jmapro.2013.02.004 ↗
4. Spark plasma sintering of biodegradable Si3N4 bioceramic with Sr, Mg and Si as sintering additives for spinal fusion10.1016/j.jeurceramsoc.2017.10.003 ↗
5. Evaluation of surface and sub-surface cracks of ground ceramic10.1016/S0924-0136(98)00403-8 ↗
6. Visualization of subsurface damage in silicon nitride from grinding by a plasma etching and dye impregnation method10.1111/j.1551-2916.2006.01115.x ↗
7. Grinding characteristics in high speed grinding of engineering ceramics with brazed diamond wheels10.1016/j.jmatprotec.2010.02.002 ↗
8. High speed grinding of silicon nitride with resin bond diamond wheels10.1016/S0924-0136(03)00284-X ↗
9. Experimental investigation on materials removal mechanism during grinding silicon carbide ceramics with single diamond grain10.1016/j.precisioneng.2017.08.019 ↗
10. Investigation on surface morphology model of Si3N4 ceramics for rotary ultrasonic grinding machining based on the neural network10.1016/j.apsusc.2016.11.044 ↗
11. Optimizing machining parameters to combine high productivity with high surface integrity in grinding silicon carbide ceramics10.1016/j.ceramint.2016.01.008 ↗
12. High throughput hybrid laser assisted machining of sintered reaction bonded silicon nitride10.1016/j.jmatprotec.2017.10.019 ↗
13. Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization10.1016/j.jeurceramsoc.2018.11.002 ↗
14. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics10.1016/j.ceramint.2016.11.066 ↗
15. Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review10.1007/s00170-017-0316-z ↗
16. Investigating the minimum quantity lubrication in grinding of Al2O3 engineering ceramic10.1016/j.jclepro.2013.11.018 ↗
17. Grinding performance improvement of silicon nitride ceramics by utilizing nanofluids10.1016/j.ceramint.2017.07.044 ↗
18. Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants10.1016/j.jmapro.2012.01.001 ↗
19. An experimental investigation on the effects of minimum quantity nano lubricant application in grinding process of Tungsten carbide10.1016/j.jmapro.2018.08.007 ↗
20. Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining10.1016/j.triboint.2017.09.016 ↗
21. Evaluation of hexagonal boron nitride nano-sheets as a lubricant additive in water10.1016/j.wear.2012.12.059 ↗
22. Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids10.1016/j.jclepro.2016.10.110 ↗
23. Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids10.1016/j.triboint.2016.03.023 ↗
24. Effect of particle concentration on tribological properties of ZnO nanofluids10.1080/10402004.2016.1154233 ↗
25. Effect of boron carbide nanoparticles on the fire reaction and fire resistance of carbon fiber/epoxy composites10.1016/j.polymer.2013.07.038 ↗
26. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants10.1016/j.wear.2007.11.013 ↗
27. Analyses of anti-wear and extreme pressure properties of castor oil with zinc oxide nano friction modifiers10.1016/j.apsusc.2017.12.131 ↗
28. Various MoS2-, WS2- and C-based micro- and nanoparticles in boundary lubrication10.1007/s11249-014-0296-1 ↗
29. Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding10.1016/j.ijmachtools.2015.09.003 ↗
30. Fabrication of GNS/MoS2 composite with different morphology and its tribological performance as a lubricant additive10.1016/j.apsusc.2018.10.266 ↗
31. Investigation of the effects of mixtures of WS2 and ZnO solid lubricants on the sliding friction and wear of M50 steel against silicon nitride at elevated temperatures10.1016/j.wear.2017.01.098 ↗
32. The tribology properties of alumina/silica composite nanoparticles as lubricant additives10.1016/j.apsusc.2011.01.084 ↗
33. Lubricating property of MQL grinding of Al2O3/SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation10.1016/j.precisioneng.2016.09.016 ↗
34. Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding10.1007/s00170-016-8453-3 ↗
35. Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids10.1016/j.ijmachtools.2014.10.005 ↗
36. Simple technique for observing subsurface damage in machining of ceramics10.1111/j.1151-2916.1994.tb05424.x ↗
37. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding10.1016/j.ijmachtools.2007.10.013 ↗
38. Grinding characteristics, material removal and damage formation mechanisms in high removal rate grinding of silicon carbide10.1016/j.ijmachtools.2010.08.008 ↗
39. Tribological performances of SiO2/graphene combinations as water-based lubricant additives for magnesium alloy rolling10.1016/j.apsusc.2019.01.062 ↗
40. Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy10.1016/j.jmatprotec.2016.01.031 ↗
41. Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processes10.1016/j.jclepro.2016.07.040 ↗
42. Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids10.1016/j.precisioneng.2017.05.012 ↗
43. Effect of natural attapulgite powders as lubrication additive on the friction and wear performance of a steel tribo-pair10.1016/j.apsusc.2014.03.170 ↗
44. Coolant pH control for optimum ceramic grinding Part II Influence of the rebinder effect on the surface grinding of aluminum oxide10.1023/A:1022819517624 ↗
45. Tribology of tungsten disulfide films in humid environments: the role of a tailored metal-matrix composite substrate10.1016/S0043-1648(99)00082-4 ↗
46. Tribological behaviour of modified jatropha oil by mixing hexagonal boron nitride nanoparticles as a bio-based lubricant for machining processes10.1016/j.jclepro.2017.01.086 ↗
47. Coolant pH control for optimum ceramic grinding. III. Rebinder Effect in silicon nitride10.1007/s10853-008-3230-9 ↗
48. Grinding of hard and brittle materials10.1016/S0007-8506(07)60748-3 ↗