High-entropy (Hf0.25Zr0.25Ti0.25Cr0.25)B2 ceramic incorporated SiC-Si composite coating to protect C/C composites against ablation above 2400 K
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Influence of material and process parameters on microstructure evolution during the fabrication of carbon–carbon composites: a review10.1007/s10853-021-06401-3 ↗
2. Investigation on the relationship between multilayer architecture and ablation behavior using an oxyacetylene torch10.1016/j.corsci.2022.110104 ↗
3. L. Han, C. Xiao, Q. Song, et al. Nano-interface effect of graphene on carbon nanotube reinforced carbon/carbon composites. Carbon 190 (2022), 422-429. 10.1016/j.carbon.2022.01.010.10.1016/j.carbon.2022.01.010 ↗
4. Novel one-step formed composite reinforcement of "Spider web like" SiCnw networks and "Z-pins like" SiC rods for ablation resistance improvement of C/C-ZrC-SiC10.1016/j.jeurceramsoc.2021.10.051 ↗
5. Advances in ablative composites of carbon based materials: a review10.1021/acs.iecr.9b04625 ↗
6. Advances in antioxidation coating materials for carbon/carbon composites10.1016/j.jallcom.2021.161143 ↗
7. Q. Fu, P. Zhang, L. Zhuang, et al. Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: take carbon/carbon composites and their coatings as the examples. J. Mater. Sci. Technol. 96 (2022), 31-68. 10.1016/j.jmst.2021.03.076.10.1016/j.jmst.2021.03.076 ↗
8. P. Wang, M. Zhang, W. Sun, et al. Oxidation protection of B4C modified HfB2-SiC coating for C/C composites at 1073–1473 K. Ceram. Int.. 48 (2022), 3206-3215. 10.1016/j.ceramint.2021.10.094.10.1016/j.ceramint.2021.10.094 ↗
9. Long-life ablation resistance ZrB2-SiC-TiSi2 ceramic coating for SiC coated C/C composites under oxidizing environments up to 2200 K10.1016/j.jallcom.2020.153934 ↗
10. Laser ablation behavior of SiO2-Nd2O3/Si-SiC-MoSi2 coated C/C composites repaired by laser cladding10.1016/j.corsci.2022.110132 ↗
11. Research progress in surface strengthening technology of carbide-based coating
12. Advances in ultra-high temperature ceramics, composites, and coatings10.1007/s40145-021-0550-6 ↗
13. X. Zhu, Y. Zhang, J. Zhang, et al. A compound glass coating with micro-pores to protect SiC-coated C/C composites against oxidation at 1773 K and 1973 K. Corrosion Sci.. 195 (2022), 109983. 10.1016/j.corsci.2021.109983.10.1016/j.corsci.2021.109983 ↗
14. Ablation behavior of (ZrC/SiC)3 alternate coating prepared on sharp leading edge C/C composites by CVD10.1016/j.jmst.2021.10.049 ↗
15. Stability, mechanical, and thermodynamic behaviors of (TiZrHfTaM)C (M = Nb, Mo, W, V, Cr) high-entropy carbide ceramics10.1016/j.jallcom.2022.163868 ↗
16. Wood-derived ultra-high temperature carbides and their composites: a review10.1016/j.ceramint.2019.11.104 ↗
17. Preparation of HfC-SiC ultra-high-temperature ceramics by the copolycondensation of HfC and SiC precursors10.1007/s10853-022-06934-1 ↗
18. Comprehensive oxidation mechanisms of heterogeneous laminated HfB2–SiC/Ti ceramics under oxyacetylene conditions10.1016/j.jeurceramsoc.2022.02.030 ↗
19. High-entropy ceramics: review of principles, production and applications10.1016/j.mser.2021.100644 ↗
20. A. Kirnbauer, A. Wagner, V. Moraes, et al. Thermal stability and mechanical properties of sputtered (Hf,Ta,V,W,Zr)-diborides. Acta Mater.. 200 (2020), 559-569. 10.1016/j.actamat.2020.09.018.10.1016/j.actamat.2020.09.018 ↗
21. Microstructure and oxidation mechanism of (Zr0.2Hf0.2Ta0.2Nb0.2Ti0.2)B2 high-entropy ceramic10.1016/j.jeurceramsoc.2021.12.036 ↗
22. Ablation behavior of single and alternate multilayered ZrC-SiC coatings under oxyacetylene torch10.1016/j.jeurceramsoc.2021.11.008 ↗
23. Development of SiC-ZrC-based ultra-high temperature ceramic coatings via composite method of polymer precursor pyrolysis plus gaseous reactive infiltration10.1016/j.surfcoat.2021.127996 ↗
24. Development of ultrahigh-entropy ceramics with tailored oxidation behavior10.1016/j.jeurceramsoc.2021.05.010 ↗
25. The role of multi-elements and interlayer on the oxidation behaviour of (Hf-Ta-Zr-Nb)C high entropy ceramics10.1016/j.corsci.2020.109019 ↗
26. Entropy stabilized single-phase (Hf,Nb,Ta,Ti,Zr)B2 solid solution powders obtained via carbo/boro-thermal reduction10.1016/j.jallcom.2020.153930 ↗
27. Fabrication of textured (Hf0.2Zr0.2Ta0.2Cr0.2Ti0.2)B2 high-entropy ceramics10.1016/j.jeurceramsoc.2020.08.071 ↗
28. A. Nisar, T. Dolmetsch, T. Paul, et al. Unveiling enhanced oxidation resistance and mechanical integrity of multicomponent ultra‐high temperature carbides. J. Am. Ceram. Soc.. 105 (2022), 2500-2516. 10.1111/jace.18281.10.1111/jace.18281 ↗
29. Multiphase composite Hf0.8Ti0·2B2–SiC–Si coating providing oxidation and ablation protection for graphite under different high temperature oxygen-containing environments10.1016/j.ceramint.2020.09.019 ↗
30. A CrSi2-HfB2-SiC coating providing oxidation and ablation protection over 1973 K for SiC coated C/C composites10.1016/j.corsci.2020.108536 ↗
31. Exploring Hf-Ta-O precipitation upon ablation of Hf-Ta-Si-C coating on C/C composites10.1016/j.jeurceramsoc.2022.01.054 ↗
32. Multicomponent (Hf0.25Zr0.25Ti0.25Cr0.25)B2 ceramic modified SiC–Si composite coatings In-situ synthesis and high-temperature oxidation behavior10.1016/j.ceramint.2022.01.129 ↗
33. Oxidation behavior of SiC-HfB2-Si coating on C/C composites prepared by slurry dipping combined with gaseous Si infiltration10.1016/j.surfcoat.2020.125335 ↗
34. Microstructure evolution of in-situ SiC-HfB2-Si ternary coating and its corrosion behaviors at ultra-high temperatures10.1016/j.jeurceramsoc.2021.05.058 ↗
35. A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon-carbon composites against oxidation at 1773 K and 1973 K10.1016/j.corsci.2021.109331 ↗
36. Effect of TiB2 on the self-crack-healing ability of SiC-Si coating at 1300 °C10.1016/j.surfcoat.2021.127675 ↗
37. L. Zhou, J. Zhang, D. Hu, et al. High temperature oxidation and ablation behaviors of HfB2-SiC/SiC coatings for carbon/carbon composites fabricated by dipping-carbonization assisted pack cementation. J. Mater. Sci. Technol.. 111 (2022), 88-98. 10.1016/j.jmst.2021.08.092.10.1016/j.jmst.2021.08.092 ↗
38. Merging toughness and oxidation resistance in a light ZrB2 composite10.1016/j.matdes.2019.108078 ↗
39. Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C10.1016/j.corsci.2021.109385 ↗
40. Structural design and ablation performance of ZrB2/MoSi2 laminated coating for SiC coated carbon/carbon composites10.1016/j.jeurceramsoc.2019.09.046 ↗
41. 1996
42. Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C10.1038/ncomms15836 ↗
43. Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure10.1016/j.compositesb.2021.109040 ↗
44. N. Liu, L. Guo, G. Kou, et al. Ablation behavior of thin-blade co-deposited C/Cx-SiCy composites under the influence of the complex fluid conditions of the oxyacetylene torch. Ceram. Int.. 48 (2022), 16923-16932. 10.1016/j.ceramint.2022.02.247.10.1016/j.ceramint.2022.02.247 ↗
45. The influence of heat treatment on the ablation behavior of the C/Cx-SiCy composites tested by thin-blade under oxyacetylene torch
46. Long-time ablation behavior of the multilayer alternating CVD-(SiC/HfC)3 coating for carbon/carbon composites10.1016/j.corsci.2021.109586 ↗
47. Effects of PyC shell thickness on the microstructure, ablation resistance of SiCnws/PyC-C/C-ZrC-SiC composites10.1016/j.jmst.2020.08.047 ↗
48. Microstructure and ablation performance of HfC/PyC core-shell structure nanowire-reinforced Hf1-xZrxC coating10.1016/j.jeurceramsoc.2021.08.036 ↗
49. Ablation properties of HfB2 coatings prepared by supersonic atmospheric plasma spraying for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2018.09.060 ↗
50. Ablation resistance of HfB2-SiC coating prepared by in-situ reaction method for SiC coated C/C composites10.1016/j.ceramint.2017.06.052 ↗
51. UHTC coating reinforced by HfC nanowires against ablation for C/C composites10.1016/j.surfcoat.2017.01.014 ↗
52. Ablation resistance of ZrB2-SiC coating prepared by supersonic atmosphere plasma spraying for SiC-coated carbon/carbon composites10.1016/j.ceramint.2014.06.064 ↗
53. Characterization and ablation resistance of ZrB2-xSiC gradient coatings deposited with HPPS10.1016/j.ceramint.2020.02.280 ↗
54. Effect of powder pre-oxidation on the microstructure and ablation resistance of ZrB2–SiC coating10.1016/j.jallcom.2020.154881 ↗
55. Oxidation and ablation resistance of the ZrB2–CrSi2–Si/SiC coating for C/C composites at high temperature10.1016/j.jallcom.2015.12.011 ↗
56. Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame10.1007/s11771-020-4479-7 ↗
57. Ablation mechanism and properties of SiO2 modified ZrB2-SiC coatings fabricated on C/C composites via plasma spraying technology10.1016/j.surfcoat.2019.125132 ↗
58. High-temperature oxidation of intermetallics formed by group iv transition metals with chromium10.1007/s11106-004-0011-0 ↗
59. High-temperature oxidation of AlN–TiCrB2 composites in air. II. Structure and phase composition of oxide layers formed on AlN–TiCrB2 Composites in air up to 1600°C10.1007/s11106-016-9753-8 ↗
60. Part II: experimental verification of computationally predicted preferential oxidation of refractory high entropy ultra-high temperature ceramics10.1016/j.actamat.2020.07.004 ↗
61. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
62. Ablation behaviors and mechanism of ultra‐thick anti‐oxidation layer coating on carbon‐bonded carbon fiber composites10.1111/jace.16617 ↗
63. Comparing oxidation behaviors at 1773 K and 1973 K of HfB2-MoSi2/SiC-Si coating prepared by a combination method of pack cementation, slurry painting and in-situ synthesis10.1016/j.surfcoat.2020.126418 ↗
64. Advances in zirconia science and technology
65. Phase Diagrams
66. The system HfO2-TiO210.1111/j.1151-2916.1987.tb05655.x ↗
67. Y. Wang, B. Zhang, C. Zhang, et al. Ablation behaviour of (Hf-Ta-Zr-Nb)C high entropy carbide ceramic at temperatures above 2,100 °C. J. Mater. Sci. Technol.. 113 (2022), 40-47. 10.1016/j.jmst.2021.09.064.10.1016/j.jmst.2021.09.064 ↗
68. T. Glechner, H.G. Oemer, T. Wojcik, et al. Influence of Si on the oxidation behavior of TM-Si-B2±z coatings (TM = Ti, Cr, Hf, Ta, W). Surf. Coating. Technol. 434 (2022), 128178.. 10.1016/j.surfcoat.2022.128178.10.1016/j.surfcoat.2022.128178 ↗
69. Formation and oxidation behavior of refractory high-entropy silicide (NbMoTaW)Si2 coating10.1016/j.corsci.2022.110134 ↗
70. High‐temperature oxidation behavior of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high‐entropy ceramics in air10.1111/jace.16725 ↗
71. Part I: theoretical predictions of preferential oxidation in refractory high entropy materials10.1016/j.actamat.2020.07.003 ↗
72. High-entropy fluorite oxides10.1016/j.jeurceramsoc.2018.04.010 ↗
73. High-entropy ceramics: present status, challenges, and a look forward10.1007/s40145-021-0477-y ↗
74. Phase relations of the Cr2O3-TiO2 system10.1016/0022-4596(78)90112-3 ↗
75. The system HfO2-TiO210.1111/j.1151-2916.1987.tb05655.x ↗
76. Ablation resistance of HfC(Si, O)-HfB2(Si, O) composites fabricated by one-step reactive spark plasma sintering10.1016/j.jeurceramsoc.2020.11.054 ↗
77. High-temperature phase composition, crystal stabilisation, and interfacial diffusion of (NbC-ZrC)/SiC double-layer coated C/C composites enduring the oxyacetylene flame10.1016/j.corsci.2021.109541 ↗
78. Integrative improvement on thermophysical properties and ablation resistance of laminated carbon/carbon composites modified by in situ grown HfC nanowires onto carbon fiber cloths10.1016/j.jeurceramsoc.2020.08.047 ↗
79. Thermodynamic assessment of the group IV, V and VI oxides for the design of oxidation resistant multi-principal component materials10.1016/j.jeurceramsoc.2018.11.004 ↗
80. New insight into the formation and oxygen barrier mechanism of carbonaceous oxide interlayer in a multicomponent carbide10.1111/jace.17143 ↗
81. Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air10.1007/s40145-021-0469-y ↗
82. Effects of Ti, Y, and Hf additions on the thermal properties of ZrB210.1016/j.jeurceramsoc.2020.04.011 ↗
83. Y. Jiang, S. Yin, M. Li, et al. Oxidation and ablation behaviour of multiphase ultra-high-temperature ceramic Ta0·5Zr0·5B2–Si–SiC protective coating for graphite. Ceram. Int.. 47 (2021), 11358-11371. 10.1016/j.ceramint.2020.12.262.10.1016/j.ceramint.2020.12.262 ↗