CVD synthesis of nanometer SiC coating on diamond particles
Source abstract
Abstract
Abstract Poor interfacial bonding between diamond and matrices has limited industrial applications of diamond-containing composites. Herein, continuous and dense nanometer SiC coatings were deposited on both large size (200 μm) and small size (1.0 μm) diamond particles to improve the wettability of diamond and protect it from oxidation and graphitization. Coating procedure consisted of first pretreating diamond particles followed by chemical vapor deposition (CVD) using methyltrichlorosilane (MTS: CH3SiCl3) as a precursor. Effects of deposition temperature, time, and gas flowing rate on microstructures of SiC coatings were all studied. Results showed that diamond surfaces were fully coated by SiC with thicknesses of 30 nm and 20 nm for large and small size diamond particles, respectively. Meanwhile, onset oxidation temperatures of large and small SiC-coated diamond particles increased by 250 and 130 °C, showing greatly enhanced oxidation resistance than that of raw diamond particles. The compressive fracture strength (CFS) of SiC-coated diamond (200 μm) is 226 N, improved by 8.5% compared with that of the raw diamond (201 N). In sum, CVD method is promising for the preparation of homogeneous nanometer SiC coatings on diamond particles for its modification and further application in composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructure and thermal properties of copper–diamond composites with tungsten carbide coating on diamond particles10.1016/j.matchar.2014.07.025 ↗
2. Progress to electrical properties of diamond-SiC composites under high pressure and high temperature10.1016/j.diamond.2019.03.012 ↗
3. Electrodeposition of nano-diamond/copper composite platings: improved interfacial adhesion between diamond and copper via formation of silicon carbide on diamond surface10.1016/j.surfcoat.2020.126322 ↗
4. Optimized thermal conductivity of diamond/Cu composite prepared with tungsten-copper-coated diamond particles by vacuum sintering technique10.1016/j.vacuum.2018.03.052 ↗
5. Enhanced thermal conductivity in diamond/aluminum composites: comparison between the methods of adding Ti into Al matrix and coating Ti onto diamond surface10.1016/j.surfcoat.2012.11.070 ↗
6. Enhanced thermal conductivity in Diamond/Aluminum composites with tungsten coatings on diamond particles prepared by magnetron sputtering method10.1016/j.jallcom.2017.08.055 ↗
7. Effects of dual-layer coatings on microstructure and thermal conductivity of diamond/Cu composites prepared by vacuum hot pressing10.1016/j.surfcoat.2015.07.059 ↗
8. Preparation of copper-diamond composites with chromium carbide coatings on diamond particles for heat sink applications10.1016/j.applthermaleng.2013.05.038 ↗
9. Mo2C coating on diamond: different effects on thermal conductivity of diamond/Al and diamond/Cu composites10.1016/j.apsusc.2017.01.078 ↗
10. Reactive coating of SiC on diamond particles10.1002/9780470294635.ch24 ↗
11. Growth mechanism of nanometer-sized SiC and oxidation resistance of SiC-coated diamond particles10.1111/j.1551-2916.2004.00809.x ↗
12. The influence of morphology and composition of metal-carbide coatings deposited on the diamond surface on the properties of copper-diamond composites10.1016/j.surfcoat.2020.126272 ↗
13. Interface characterization of a Cu-Ti-coated diamond system10.1016/j.surfcoat.2015.08.006 ↗
14. Sintering behavior and properties of diamond/cemented carbides10.1016/j.ijrmhm.2006.05.006 ↗
15. Microstructure and thermal properties of diamond/copper composites with Mo2C in-situ nano-coating10.1016/j.surfcoat.2018.12.116 ↗
16. Preparation of the gradient Mo layers on diamond grits by spark plasma sintering and their effect on Fe-based matrix diamond10.1016/j.jallcom.2016.10.172 ↗
17. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles10.1016/j.jallcom.2009.10.040 ↗
18. Study of Ti-coated diamond grits prepared by spark plasma coating10.1016/j.diamond.2017.06.004 ↗
19. Preparation of Ti-coated diamond particles by microwave heating10.1016/j.apsusc.2016.08.168 ↗
20. Tungsten-coated diamond powders prepared by microwave-heating salt-bath plating10.1016/j.powtec.2018.07.035 ↗
21. Tungsten carbide coating on diamond particles in molten mixture of Na2CO3 and NaCl10.1016/j.diamond.2014.11.008 ↗
22. Effect of molybdenum as interfacial element on the thermal conductivity of diamond/Cu composites10.1016/j.jallcom.2012.03.045 ↗
23. Boron carbide coatings on diamond particles10.1016/j.diamond.2010.08.013 ↗
24. Growth and properties of CVD-SiC layers using tetramethylsilane10.1016/0921-5107(92)90196-G ↗
25. Thermal expansion coefficient of Diamond/SiC composites prepared by silicon vapor infiltration in vacuum10.1016/j.vacuum.2018.11.008 ↗
26. Preparation and thermal conductivities of diamond/SiC composites10.1007/s00339-018-2232-y ↗
27. Synthesis of silicon carbide coating on diamond by microwave heating of diamond and silicon powder: a heteroepitaxial growth10.1016/j.scriptamat.2007.06.016 ↗
28. Electrodeposition of nano-diamond/copper composite platings: improved interfacial adhesion between diamond and copper via formation of silicon carbide on diamond surface10.1016/j.surfcoat.2020.126322 ↗
29. Preparation and microstructure of SiC coatings by chemical vapor deposition under different carbon matrix
30. Effects of deposition temperature on the microstructures of SiC coating by CVD
31. Fabrication of PyC/SiC compound coating on carbon fiber preform and its effect on the properties of Cf/Al composite, rare metal mat
32. A study of surface-coated SiC whiskers on carbon fiber substrates and their properties for diesel particulate filter applications10.1016/j.ceramint.2010.12.016 ↗
33. Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process10.1016/j.ceramint.2010.05.014 ↗
34. High-hardness diamond composite consolidated by spark plasma sintering10.1111/jace.14199 ↗
35. Fabrication of tungsten carbide–diamond composites using SiC-coated diamond10.1016/j.ijrmhm.2019.105053 ↗
36. Spark plasma sintering of SiC-coated large-size diamond powder
37. Passive-oxidation kinetics of high-purity silicon carbide from 800 °C to 1100 °C10.1111/j.1151-2916.1996.tb08724.x ↗
38. Effect of molybdenum carbide intermediate layers on thermal properties of copper-diamond composites10.1016/j.jallcom.2013.04.121 ↗
39. The study of the technics on CVD SiC compact coating
40. Microstructure and properties of Diamond/SiC composites via hot molding forming and CVI densifying10.1002/adem.201800640 ↗
41. Combining Cr pre-coating and Cr alloying to improve the thermal conductivity of diamond particles reinforced Cu matrix composites10.1016/j.jallcom.2018.03.241 ↗
42. Deposition of highly adhesive nanocrystalline diamond films on Ti substrates via diamond/SiC composite interlayers10.1016/j.diamond.2020.107928 ↗
43. Microstructure and mechanical property of high growth rate SiC via continuous hot-wire CVD10.1111/jace.16434 ↗
44. One-dimensional Au/SiC heterojunction nanocomposites with enhanced photocatalytic and photoelectrochemical performances Kinetics and mechanism insights10.1016/j.electacta.2018.02.070 ↗
45. Fabrication of new cemented carbide containing diamond coated with nanometer-sized SiC particles10.1111/j.1151-2916.2003.tb03280.x ↗