On the substantial mechanical reinforcement of Polylactic Acid with Titanium Nitride ceramic nanofillers in material extrusion 3D printing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Ceramics for medical applications10.1039/b007852m ↗
2. Scaffolds in the microbial resistant era: fabrication, materials, properties and tissue engineering applications, Mater
3. Enhanced moderate electric field dielectric energy storage performance in (Bi0.5Na0.5)TiO3-based lead-free ceramics10.1016/j.ceramint.2022.08.272 ↗
4. Exceptional strain strengthening and tuning of mechanical properties of TiN
5. Characterization of titanium nitride thin films10.1016/0040-6090(90)90274-H ↗
6. A review of additive manufacturing10.5402/2012/208760 ↗
7. The role of additive manufacturing in the era of industry 4.010.1016/j.promfg.2017.07.148 ↗
8. Vidakis · 2022 · 1
9. Ceramic binder jetting additive manufacturing: particle coating for increasing powder sinterability and part strength10.1016/j.matlet.2018.09.118 ↗
10. Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing10.1016/j.msea.2020.139514 ↗
11. Sustainable additive manufacturing: mechanical response of acrylonitrile-butadiene-styrene over multiple recycling processes
12. Wear resistance investigation of titanium nitride-based coatings10.1016/j.ceramint.2015.04.152 ↗
13. Influence of nitrogen gas over microstructural, vibrational and mechanical properties of CVD Titanium nitride (TiN) thin film coating10.1016/j.ceramint.2021.02.254 ↗
14. Evaluation of thin film titanium nitride electrodes for electroanalytical applications10.1002/elan.200703832 ↗
15. Teber · 2022
16. In-situ oxide-free titanium nitride coating by conventional plasma spraying with improved properties10.1016/j.ceramint.2019.03.063 ↗
17. Preparation and characterization of nanostructured titanium nitride thin films at room temperature10.1016/j.ceramint.2016.01.164 ↗
18. Oxidation of vanadium nitride and titanium nitride coatings10.1016/j.susc.2006.12.010 ↗
19. Temperature-dependent optical properties of titanium nitride10.1063/1.4977840 ↗
20. Optical properties and plasmonic performance of titanium nitride10.3390/ma8063128 ↗
21. Broadband Purcell effect: radiative decay engineering with metamaterials10.1063/1.4710548 ↗
22. Plasma assists titanium nitride and surface modified titanium nitride nanoparticles from titanium scraps for magnetic properties and supercapacitor applications10.1016/j.ceramint.2022.06.317 ↗
23. Sputtered titanium nitride films on nanowires Si substrate as pseudocapacitive electrode for supercapacitors10.1016/j.ceramint.2021.06.084 ↗
24. Titanium-nitride coating of orthopaedic implants: a review of the literature10.1155/2015/485975 ↗
25. A comparative study of titanium nitride (TiN), titanium oxy nitride (TiON) and titanium aluminum nitride (TiAlN), as surface coatings for bio implants10.1016/j.surfcoat.2011.05.004 ↗
26. Titanium nitride coatings in clinical dentistry10.1016/0300-5712(92)90021-4 ↗
27. Nitrogen and sulfur co-doped MXene ink without additive for10.1016/j.cej.2022.138372 ↗
28. Silicon nitride 3D printed implants with improved material properties for bone defect repair10.1096/fasebj.2022.36.S1.R3649 ↗
29. Vidakis
30. On the thermal and mechanical performance of polycarbonate/titanium nitride nanocomposites in material extrusion additive manufacturing
31. Large-scale production, properties and commercial applications of poly lactic acid polymers10.1016/S0141-3910(97)00148-1 ↗
32. Three-Dimensional printed antimicrobial objects of polylactic acid (PLA)-Silver nanoparticle nanocomposite filaments produced by an in-situ reduction reactive melt mixing process10.3390/biomimetics5030042 ↗
33. Investigation of mechanical properties and applications of polylactic acids - a review10.1088/2053-1591/ab4648 ↗
34. Polylactic acid: synthesis and biomedical applications10.1111/jam.14290 ↗
35. Mechanical properties of 3D printed polylactic acid product for various infill design parameters: a review10.1088/1742-6596/1569/4/042010 ↗
36. Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing10.11113/jt.v78.6265 ↗
37. Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing10.1163/156856297X00588 ↗
38. Van Den Eynde · 2018 · 139
39. The effect of nozzle hole diameter of 3D printing on porosity and tensile strength parts using polylactic acid material10.1515/eng-2020-0083 ↗
40. A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations10.1016/j.compositesb.2019.01.025 ↗
41. On the strain rate sensitivity of fused filament fabrication (Fff) processed pla, abs, petg, pa6, and pp thermoplastic polymers10.3390/polym12122924 ↗
42. Waste office paper filled polylactic acid composite filaments for 3D printing10.1016/j.compositesb.2021.108998 ↗
43. Mechanical properties of specimens 3D printed with virgin and recycled polylactic acid10.1089/3dp.2016.0054 ↗
44. Developing a novel technique for the fabrication of PLA-graphite composite filaments using FDM 3D printing process
45. Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites10.1002/pc.24422 ↗
46. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing10.1016/j.jmatprotec.2016.07.025 ↗
47. Fused filament fabrication three-dimensional printing multi-functional of polylactic acid/carbon black nanocomposites
48. Rheological and electrical behaviour of nanocarbon/poly(lactic) acid for 3D printing applications10.1016/j.compositesb.2019.03.021 ↗
49. Morphological and electrical characterization of conductive polylactic acid based nanocomposite before and after FDM 3D printing10.1002/app.47040 ↗
50. Biomaterials: polylactic acid and 3D printing processes for orthosis and prosthesis10.37358/MP.17.1.4794 ↗
51. Fabrication of polylactic acid (PLA)-based porous scaffold through the combination of traditional bio-fabrication and 3D printing technology for bone regeneration10.1016/j.colsurfb.2020.111420 ↗
52. Vidakis
53. Effect of melt mixing time in internal mixer on mechanical properties and crystallization behavior of glycidyl methacrylate grafted poly (lactic acid)
54. Melt mixing of polycarbonate with multi-walled carbon nanotubes in miniature mixers10.1002/mame.200500335 ↗
55. The preparation of agglomerates containing solid dispersions of diazepam by melt agglomeration in a high shear mixer10.1016/S0378-5173(03)00228-X ↗
56. Melt pelletization in a high shear mixer. IX. Effects of binder particle size10.1016/0378-5173(96)04548-6 ↗
57. Cement-based additive manufacturing: experimental investigation of process quality10.1007/s00170-020-04978-8 ↗
58. Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy10.1002/pen.25568 ↗
59. Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy10.1007/s10973-009-0121-5 ↗
60. Kinetics of thermo-oxidative and thermal degradation of poy(D,L-lactide) (PDLLA) at processing temperature10.1016/j.polymdegradstab.2006.07.004 ↗
61. Study of the deposition of Ti/TiN multilayers by magnetron sputtering10.1002/sia.3299 ↗
62. Raman scattering in gray tin10.1103/PhysRevB.3.1243 ↗
63. Essential work of fracture studies of 3D Printed PEEK(Poly-ether-ether-ketone)polymer10.1016/j.engfracmech.2022.108656 ↗
64. Deformation characteristics of glass-filled epoxy composite under compression: role of filler shape and volume fraction10.1002/pc.25341 ↗
65. The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles10.1016/j.polymer.2013.06.009 ↗
66. Print parameter optimization and mechanical deformation analysis of alumina-nanoparticle doped photocurable nanocomposites fabricated using vat-photopolymerization based additive technology
67. Measurements of the mechanical response of unidirectional 3D-printed PLA10.1016/j.matdes.2017.03.051 ↗
68. Fracture behavior of 3D printed carbon fiber-reinforced polymer composites10.1016/j.compscitech.2021.108741 ↗
69. Bending fatigue behavior of fused filament fabrication 3D - printed ABS and PLA joints with rotary friction welding
70. Effects of porosity on the mechanical properties of additively manufactured components: a critical review10.1088/2053-1591/abcc5d ↗
71. Flexural properties and fracture behavior of CF/PEEK in orthogonal building orientation by FDM: microstructure and mechanism
72. Influence of the viscosity ratio in PC/SAN blends filled with MWCNTs on the morphological, electrical, and melt rheological properties10.1016/j.polymer.2013.10.040 ↗
73. All-aromatic SWCNT-Polyetherimide nanocomposites for thermal energy harvesting applications10.1016/j.compscitech.2017.12.030 ↗
74. Selective localization of multi-wall carbon nanotubes in homopolymer blends and a diblock copolymer. Rheological orientation studies of the final nanocomposites10.1016/j.polymer.2012.08.004 ↗
75. Mechanical properties of 3D-printed acrylonitrile–butadiene–styrene TiO2 and ATO nanocomposites
76. S.G. and N.V. Lazaros Tzounis, Markos Petousis, 3D Printed Thermoelectric Polyurethane/Multiwalled Carbon Nanotube Nanocomposites: A Novel Approach towards the Fabrication of Flexible and Stretchable Organic Thermoelectrics, (n.d.). https://doi.org/10.3390/ma13122879.10.3390/ma13122879 ↗
77. Reinforcing efficiency of nanoparticles: a simple comparison for polymer nanocomposites10.1016/j.compscitech.2007.10.033 ↗
78. 50th anniversary perspective: are polymer nanocomposites practical for applications?10.1021/acs.macromol.6b02330 ↗
79. Viscoelastic behavior and reinforcement mechanism in rubber nanocomposites in the vicinity of spherical nanoparticles10.1021/jp4039489 ↗
80. Interaction of silica nanoparticle/polymer nanocomposite cluster network structure: revisiting the reinforcement mechanism10.1021/jp400200s ↗
81. A guide for hydrodynamic reinforcement effect in nanoparticle-filled polymers10.1080/10408436.2015.1135415 ↗
82. Reinforcements in multi-scale polymer composites: processing, properties, and applications10.1016/j.compositesb.2017.11.028 ↗
83. Thermoplastic/thermoset multilayer composites: a way to improve the impact damage tolerance of thermosetting resin matrix composites10.1016/j.compstruct.2017.03.044 ↗
84. Molecular dynamics simulation for insight into microscopic mechanism of polymer reinforcement10.1039/C0CP00297F ↗