journal article·2016-05

Low-temperature synthesis of tantalum carbide by facile one-pot reaction

Jinming Jiang, Song Wang, Wei Li, Zhaohui Chen

Ceramics International· Volume 42· Issue 6
Publisher page

Abstract

Abstract Tantalum carbide (TaC) was synthesized by polycondensation and carbothermal reduction reactions from an inorganic hybrid. Tantalum pentachloride (TaCl 5 ) and phenolic resin were used as the sources of tantalum and carbon, respectively. FTIR of as-synthesized dried complexes revealed formation of Ta-O. Pyrolysis of the complexes at 800 °C/1 h under argon resulted in tantalum oxide which after heat treatment at 1000–1200 °C transformed to tantalum carbide. The mean crystallite size of the precursor-derived TaC ceramics was less than 40 nm and Ta and C elements were homogeneously distributed in the ceramic samples. Mechanism for formation of TaC ceramic was analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Oxidation-based materials selection for 2000 °C+ hypersonic aerosurfaces: theoretical considerations and historical experience10.1023/B:JMSC.0000041686.21788.77 ↗
2. Aerothermodynamic study of UHTC-based thermal protection systems10.1016/j.ast.2004.12.003 ↗
3. Spark plasma sintering and mechanical behavior of ZrC-based composites10.1016/j.scriptamat.2008.05.026 ↗
4. Preparation of carbon fiber reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature10.1016/j.scriptamat.2012.07.044 ↗
5. Microstructure and properties of W-ZrC composites prepared by the displacive compensation of porosity (DCP) method10.1016/j.jallcom.2011.05.105 ↗
6. Hot pressing of tantalum carbide with and without sintering additives10.1111/j.1551-2916.2006.01416.x ↗
7. Formation of NbC and TaC by solid-state reaction10.1007/BF01111945 ↗
8. Combustion synthesis of tantalum carbides TaC and Ta2C10.1016/j.jallcom.2005.07.058 ↗
9. Synthesis of nanosized zirconium carbide from preceramic polymers by the facile one-pot reaction10.1002/pat.1664 ↗
10. Pyrolysis synthesis and microstructure of zirconium carbide from new preceramic polymers10.1016/j.ceramint.2013.11.044 ↗
11. Synthesis of zirconium carbide powders using chitosan as carbon source10.1016/j.ceramint.2012.09.032 ↗
12. Synthesis of submicrometer zirconium carbide formed from inorganic–organic hybrid precursor pyrolysis10.1007/s10971-012-2854-z ↗
13. Morphology and formation mechanism of TaC made by liquid phase infiltration method in C/C composites
14. Synthesis, characterization and microstructure of tantalum carbide-based ceramics by liquid polymeric precursor method10.1016/j.ceramint.2015.06.023 ↗
15. Preparation of epoxy/zirconia hybrid materials via in situ polymerization using zirconium alkoxide coordinated with acid anhydride10.1016/j.matchemphys.2011.04.034 ↗
16. Spectroscopic studies of NbCl5 and TaCl5 in methanol solutions. An investigation of the alcoholysis and the formation of organic compounds10.1023/A:1018582406721 ↗
17. Zhang Yl. The effect of zirconium incorporation on the thermal stability and carbonized product of phenol-formaldehyde resin10.1016/j.polymdegradstab.2014.01.013 ↗
18. Carbothermal Synthesis of submicrometer zirconium carbide from polyzirconoxane and phenolic resin by the facile one-pot reaction10.1111/j.1551-2916.2012.05456.x ↗
19. Preparation of zirconia fibers cotton by centrifugal spinning of polyacetylacetonatozirconium spinning solution
20. Mechanisms of suboxide growth and etching in atomic layer deposition of tantalum oxide from TaCl5 and H2O10.1016/S0169-4332(96)00554-5 ↗
21. Formation of NbC and TaC from Gel-Derived Precursors10.1016/S0955-2219(97)00012-5 ↗
22. Studies on the carbothermal preparation of titanium carbide from different gel precursors10.1016/S0955-2219(98)00190-3 ↗
23. Microstructure and crystallization behaviour of TiO2 precursor prepared by the sol–gel method using metal alkoxide10.1007/BF00368935 ↗
24. Observations on zeta phase in the system Ta-C10.1111/j.1151-2916.1966.tb13223.x ↗
25. The variation of lattice parameter with carbon content of tantalum carbide10.1021/j100905a028 ↗
26. Storm · 1967
27. Synthesis and pyrolysis behavior of a soluble polymer precursor for ultra-fine zirconium carbide powders10.1016/j.ceramint.2015.02.039 ↗
28. Carbon-encapsulated Fe nanoparticles from detonation-induced pyrolysis of ferrocene10.1016/j.carbon.2004.09.020 ↗
29. Pyro-synthesis of functional nanocrystals10.1038/srep00946 ↗
30. Synthesis and thermal behavior of novel Si-B-C-N ceramic precursors10.1021/cm9910299 ↗