RETRACTED: Structural, linear/nonlinear optical characteristics and radiation shielding effectiveness of Cu4O3/Cu2O dual-phase thin films: Influence of oxygen flow rate in reactive sputtering process
Source abstract
Abstract
In the present work, we investigated the impact of oxygen flow rate on the structural, linear, and nonlinear optical characteristics while also evaluating the radiation shielding effectiveness during reactive radio frequency (rf) sputtering in the deposition of Cu4O3/Cu2O dual-phase thin films. Microstructural analysis revealed distinct changes with increased OFRs, switching from a Cu2O cubic structure phase to a Cu4O3 tetragonal structure phase. The XRD patterns revealed good crystallinity, and the crystallite size of the film reduced from 28 nm to 22 nm, and the microstrain exhibited an opposing trend as the oxygen flow rate increased. In contrast, investigating the optical properties of dual-phase Cu4O3 and Cu2O thin films using UV-Vis-NIR spectroscopy revealed intriguing trends in the absorbance spectra, absorption coefficient, and extension index. The apparent bandgap increases from 2.0 eV to 2.62 eV with increasing oxygen flow rates. In addition, nonlinear optical parameters, including the nonlinear refractive index n(2) linear, nonlinear sensitivity (chi(1) and chi(3)), and nonlinear absorption coefficient beta(c) were calculated to demonstrate the applicability of these materials. The dual-phase structure of the films enhances their potential for effective radiation shielding. Our findings provide valuable insights into the design of properties of Cu4O3/Cu2O dual-phase thin films for applications ranging from photoelectric and nonlinear optical devices to radiation shielding effectiveness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiation Shielding Materials Analysis · Polymer Nanocomposite Synthesis and Irradiation · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Recent advancements of copper oxide based nanomaterials for supercapacitor applications10.1016/j.est.2020.101995 ↗
2. Characterisation of Cu 2 O, Cu 4 O 3 , and CuO mixed phase thin films produced by microwave-activated reactive sputtering10.1016/j.vacuum.2017.08.005 ↗
3. Binary copper oxides as photovoltaic absorbers: recent progress in materials and applications
4. Research progress and prospect of copper oxide nanoparticles with controllable nanostructure, morphology, and function via green synthesis10.1016/j.mtsust.2023.100526 ↗
5. A comprehensive review of green synthesis of copper oxide nanoparticles and their diverse biomedical applications10.1016/j.inoche.2020.108369 ↗
6. Copper and copper-based nanoparticles in medicine-perspectives and challenges10.3390/molecules28186687 ↗
7. Synthesis and characterization of nanomaterials for application in cost-effective electrochemical devices10.3390/su151410891 ↗
8. Synthesis of Cu2O nanocrystallites and their adsorption and photocatalysis behavior10.1016/j.apt.2011.04.001 ↗
9. One-step solution combustion synthesis of CuO/Cu2O/C anode for long cycle life Li-ion batteries10.1016/j.carbon.2018.10.016 ↗
10. Fabrication of copper oxide-based dye-sensitized solar cell with high short-circuit current density (JSC) using flexible and binder-free porous photoelectrode10.1007/s10854-022-08888-1 ↗
11. Optimizing the structure and optoelectronic properties of cuprite thin films via a plasma focus device as a solar cell absorber layer10.1039/D3CE01237A ↗
12. Efficient low-cost materials for solar energy applications: roles of nanotechnology
13. Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges10.1039/D0MA00807A ↗
14. Cu(2)O/SnO(2) heterostructures: role of the synthesis procedure on PEC CO(2) conversion10.3390/ma16134497 ↗
15. Essential roles of defects in pure graphene/Cu2O photocatalyst10.1016/j.catcom.2015.12.013 ↗
16. Thermal conversion of Cu4O3 into CuO and Cu2O and the electrical properties of magnetron sputtered Cu4O3 thin films10.1007/s00339-018-1666-6 ↗
17. Tuning the structure and preferred orientation in reactively sputtered copper oxide thin films10.1016/j.apsusc.2015.02.028 ↗
18. Reactive magnetron sputtered AlN thin films: structural, linear and nonlinear optical characteristics10.1007/s10854-023-10459-x ↗
19. Reactive sputtering of aluminum nitride (002) thin films for piezoelectric applications: a review10.3390/s18061797 ↗
20. Sputtering plasma effect on zinc oxide thin films produced on photopolymer substrates10.3390/polym15102283 ↗
21. Charge dynamics of a CuO thin film on picosecond to microsecond timescales revealed by transient absorption spectroscopy10.1021/acsami.2c22595 ↗
22. Oxygen flow rate effect on copper oxide thin films deposited by radio frequency magnetron sputtering10.1016/j.tsf.2021.139013 ↗
23. Evaluation of the structural, optical, and γ-attenuation properties of Holmium Dolomite Glass for high-transmittance optical devices10.1016/j.optmat.2024.114938 ↗
24. Phy-X/PSD: development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry10.1016/j.radphyschem.2019.108496 ↗
25. Impact of air exposure on growth rate and electrical properties of SnO2 thin films by atmospheric pressure spatial atomic layer deposition
26. Role of oxygen flow rate on the structure and stoichiometry of cobalt oxide films deposited by reactive sputtering10.1116/6.0001418 ↗
27. Effect of oxygen flow rate on properties of Cu4O3 thin films fabricated by radio frequency magnetron sputtering
28. Exploring the impact of substrate placement on Cu3N thin films as a solar cell window layer: structural and optical attributes
29. Optimizing structural, morphological, optical, and photon attenuation properties of AZO nanocrystals for radiation shielding10.1016/j.optmat.2024.115600 ↗
30. Relation between microstructural features and mechanical properties in oxygen free high conductivity copper after Equal-Channel Angular Pressing
31. Role of particle size, grain size, microstrain and lattice distortion in improved dehydrogenation properties of the ball-milled Mg(AlH4)210.1016/j.ijhydene.2012.11.006 ↗
32. Runt · 2002
33. A close look at polymer degree of crystallinity versus polymer crystalline quality10.1002/pi.6508 ↗
34. Understanding and controlling the crystallization process in reconfigurable plasmonic superlattices10.1021/acsnano.0c09746 ↗
35. Effect of oxygen flow rate on surface morphology and optical properties of reactive DC magnetron sputtered TiO2 thin films10.4028/www.scientific.net/AMM.903.51 ↗
36. Regulating the energy band-gap, UV–Vis light absorption, electrical conductivity, microwave absorption, and electromagnetic shielding effectiveness by modulating doping agent10.1016/j.polymer.2020.122981 ↗
37. Correlation of structural and optical properties in as-prepared and annealed Bi2Se3 thin films10.1016/j.jmatprotec.2018.09.005 ↗
38. Near-infrared spectroscopy as an index of brain and tissue oxygenation10.1093/bja/aep299 ↗
39. Exploring the absorption spectra of an ultra-wideband metamaterial absorber in the visible and near-infrared regions10.3390/ma15207160 ↗
40. Light transmission characteristics and cytotoxicity within A dental composite color palette10.3390/ma16103773 ↗
41. Implantation of Cu onto ZnTe thin film using plasma focus device for optoelectronic applications10.1016/j.optmat.2021.111182 ↗
42. Conduction in non-crystalline systems V. Conductivity, optical absorption and photoconductivity in amorphous semiconductors10.1080/14786437008221061 ↗
43. Novel and promising material (CuInSn3S8) for photovoltaic and optoelectronic applications
44. Broadband transparent optical phase change materials for high-performance nonvolatile photonics
45. Narrowing band gap and enhanced visible-light absorption of metal-doped non-toxic CsSnCl(3) metal halides for potential optoelectronic applications10.1039/C9RA10407K ↗
46. Oxygen defect dependent variation of band gap, Urbach energy and luminescence property of anatase, anatase–rutile mixed phase and of rutile phases of TiO2 nanoparticles10.1016/j.physe.2013.10.014 ↗
47. Effect of S-doping toward the optical properties of WO3 nanoparticles10.1016/j.matchemphys.2018.11.012 ↗
48. States in the gap10.1016/0022-3093(72)90194-9 ↗
49. Kinetics and chemical analysis of photoinduced interdiffusion in nanolayered Se/As2S3 films10.1063/1.2973460 ↗
50. Growth and characterization of Cu2O and CuO thin films10.1007/s10854-022-08506-0 ↗
51. Cu2O thin films deposited by spray pyrolysis using diethanolamine and L-ascorbic acid as reducing agents
52. Cu2O thin films deposited by reactive direct current magnetron sputtering10.1016/j.tsf.2009.02.127 ↗
53. Quantum confinement effects on the optical properties of ion beam sputtered nickel oxide thin films10.1142/S0217979201003740 ↗
54. Optical constants of multilayered colloidal ZnSe nanoparticles10.1016/j.tsf.2023.139688 ↗
55. Heywang · 1959
56. Behavior of the electronic dielectric constant in covalent and ionic materials10.1103/PhysRevB.3.1338 ↗
57. In situ laser irradiation: the kinetics of the changes in the nonlinear/linear optical parameters of as 50 Se 40 Sb 10 thin films for photonic applications10.1039/D1RA02368C ↗
58. The effect of thickness on the structural and optical properties of nano Ge-Te-Cu films10.1016/j.rinp.2018.07.023 ↗
59. Linear and non-linear optical properties of boron carbide thin films10.1016/j.apsusc.2022.155101 ↗
60. The effect of long term aging on the structural and optical properties of nano metallo-tetraphenylporphine films10.1007/s10854-015-3017-0 ↗
61. The dielectric constant and quality factor calculation of the microwave dielectric ceramic solid solutions10.1016/j.ceramint.2017.02.092 ↗
62. Proton ion irradiation on As40Se50Sb10 thin films: fluence-dependent tuning of linear–nonlinear optical properties for photonic applications10.1021/acsaelm.1c01223 ↗
63. Annealing-induced phase transformation in In(10)Se(70)Te(20) thin films and its structural, optical and morphological changes for optoelectronic applications10.1039/D3RA03731B ↗
64. Investigation of optical nonlinearities in Bi-doped Se-Te chalcogenide thin films10.1007/s11664-014-3577-4 ↗
65. Experimental investigation of the nonlinear refractive index of various soft glasses dedicated for development of nonlinear photonic crystal fibers10.1364/OME.7.003471 ↗
66. Optical properties of amorphous As–Se and Ge–As–Se thin films10.1016/S0167-577X(98)00227-4 ↗
67. Increase in nonlinear susceptibility and refractive index in quaternary In15Sb10S15Se60 thin films upon annealing at different temperature for photonic applications10.1016/j.jallcom.2022.164143 ↗
68. Linear and nonlinear optical response dependency on the crystallite size of CdTe and its structural properties
69. Effect of transparent conducting substrates on the structure and optical properties of tin (II) oxide (SnO) thin films: comparative study10.1016/j.ceramint.2021.01.209 ↗
70. Influence of proton ion irradiation on the linear–nonlinear optoelectronic properties of Sb40Se20S40 thin films at different fluences for photonic devices10.1021/acsaom.2c00007 ↗
71. Phy-X/PSD: development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry10.1016/j.radphyschem.2019.108496 ↗
72. High density of tungsten gadolinium borate glasses for radiation shielding material: effect of WO3 concentration10.1016/j.radphyschem.2021.109926 ↗