Using calcium carbide residue to prepare ecological alkali activated slag composites: Effect of anion type
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Relating water permeability to electrical resistivity and chloride penetrability of concrete containing different supplementary cementitious materials10.1016/j.cemconcomp.2019.103491 ↗
2. Global warming potential of recycled aggregate concrete with supplementary cementitious materials
3. Upcycling of waste hydrated cement paste containing high-volume supplementary cementitious materials via CO2 pre-treatment
4. Ternary cements produced with non-calcined clay, limestone, and Portland clinker
5. Comparison of energy consumption and carbon emissions from clinker and recycled cement production10.1016/j.jclepro.2021.127277 ↗
6. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
7. Effect of recycled tyre polymer fibre on engineering properties of sustainable strain hardening geopolymer composites10.1016/j.cemconcomp.2021.104167 ↗
8. Global CO2 emissions from cement production10.5194/essd-11-1675-2019 ↗
9. A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production - a review part II10.1016/j.jclepro.2015.12.115 ↗
10. Supplementary cementitious materials origin from agricultural wastes - a review10.1016/j.conbuildmat.2014.10.010 ↗
11. Rheology of alkali-activated materials: a review10.1016/j.cemconcomp.2021.104061 ↗
12. Carbonation-induced corrosion of alkali-activated binary concrete based on natural volcanic pozzolan10.1016/j.conbuildmat.2019.117189 ↗
13. Effect of adding mineral additives to alkali-activated natural pozzolan paste10.1016/j.conbuildmat.2010.12.031 ↗
14. Synthesis of kaolin-based alkali-activated cement: carbon footprint, cost and energy assessment10.1016/j.jmrt.2020.05.116 ↗
15. Effects of kaolin characteristics on the mechanical properties of alkali-activated binders10.1016/j.conbuildmat.2021.126020 ↗
16. Strength properties and microstructural characteristics of clay treated with alkali activated mortar and fiber10.1016/j.conbuildmat.2022.127486 ↗
17. Durability of alkali activated cement produced from kaolinitic clay10.1016/j.clay.2014.11.037 ↗
18. Enhancing the performance of Alkali-Activated Slag-Fly ash blended concrete through hybrid steel fiber reinforcement10.1016/j.conbuildmat.2021.125313 ↗
19. Pore solution composition of alkali-activated slag/fly ash pastes10.1016/j.cemconres.2018.10.010 ↗
20. Effect of steel slag and curing temperature on the improvement in technological properties of biomass bottom ash based alkali-activated materials10.1016/j.conbuildmat.2021.124205 ↗
21. Shrinkage mechanisms and shrinkage-mitigating strategies of alkali-activated slag composites: a critical review10.1016/j.conbuildmat.2021.125993 ↗
22. Effect of of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars10.1016/j.cemconres.2018.07.005 ↗
23. Effect of calcium hydroxide on fresh state behavior of sodium carbonate activated blast furnace slag pastes10.1016/j.conbuildmat.2019.03.328 ↗
24. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
25. The effects of KCl and KF addition to KOH electrolyte on the electrochemical characteristics of Mg2Ni electrode
26. Geopolymers and other alkali activated materials: why, how, and what?10.1617/s11527-013-0211-5 ↗
27. Life cycle assessment of geopolymer concrete10.1016/j.conbuildmat.2018.09.123 ↗
28. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
29. Deep insight into mechanical behavior and microstructure mechanism of quicklime-activated ground granulated blast-furnace slag pastes10.1016/j.cemconcomp.2022.104767 ↗
30. Effect of Ca(OH)(2) on shrinkage characteristics and microstructures of alkali-activated slag concrete10.1016/j.conbuildmat.2018.04.180 ↗
31. Microanalysis of alkali-activated fly ash-CH pastes10.1016/S0008-8846(02)00734-2 ↗
32. Novel one-part fly ash alkali-activated cements for ambient applications10.1680/jadcr.21.00144 ↗
33. One-part alkali activated slag using Ca(OH)(2) and Na2CO3 instead of NaOH as activator: more excellent compressive strength and microstructure10.1088/2053-1591/ac16f4 ↗
34. Effects of anionic species of activators on the rheological properties and early gel characteristics of alkali-activated slag paste10.1016/j.cemconres.2022.106968 ↗
35. Activator anion influences the nanostructure of alkali-activated slag cements10.1021/acs.jpcc.1c07328 ↗
36. Alkali activation of blast furnace slag using a carbonate-calcium carbide residue alkaline mixture to prepare cemented paste backfill10.1016/j.conbuildmat.2021.126234 ↗
37. Calcium carbide residue as auxiliary activator for one-part sodium carbonate-activated slag cements: compressive strength, phase assemblage and environmental benefits10.1016/j.conbuildmat.2021.125015 ↗
38. Low carbon cementitious composites: calcined quarry dust modified lime/sodium sulfate-activated slag
39. A novel method for the stabilization of soluble contaminants in electrolytic manganese residue: using low-cost phosphogypsum leachate and magnesia/calcium oxide10.1016/j.ecoenv.2020.110384 ↗
40. Chemical activation of binary slag cement with low carbon footprint10.1016/j.jclepro.2020.121455 ↗
41. Alkali activation of natural clay using a Ca(OH)(2)/Na2CO3 alkaline mixture10.1180/claymin.2017.052.4.06 ↗
42. The alkali-carbonate reaction and its reaction products an experience with Argentinean dolomite rocks10.1016/0008-8846(96)00140-8 ↗
43. Strength, fracture and durability characteristics of ambient cured alkali-activated mortars incorporating high calcium industrial wastes and powdered reagents10.3390/cryst11101167 ↗
44. Properties of alkali activated slag-fly ash blends with limestone addition10.1016/j.cemconcomp.2015.01.007 ↗
45. Influence of limestone content, fineness, and composition on the properties and microstructure of alkali-activated slag cement10.1016/j.cemconcomp.2016.06.015 ↗
46. Mechanical and microstructural characterization of an alkali-activated slag/limestone fine aggregate concrete10.1016/j.conbuildmat.2009.02.022 ↗
47. Toward clean cement technologies: a review on alkali-activated fly-ash cements incorporated with supplementary materials10.1016/j.jnoncrysol.2019.01.025 ↗
48. Properties and microstructural characteristics of alkali-activated slag-blended cements
49. An initial study on alkali activated limestone binders10.1016/j.cemconres.2019.04.002 ↗
50. Study of a binder based on alkaline activated limestone10.1016/j.conbuildmat.2021.125323 ↗
51. Reaction of calcium carbonate minerals in sodium silicate solution and its role in alkali-activated systems10.1016/j.mineng.2021.106849 ↗
52. Activation of gypsum anhydrite-slag mixtures10.1016/0008-8846(95)00018-6 ↗
53. Shrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement10.1016/j.conbuildmat.2020.118687 ↗
54. Effect of CaSO4 incorporation on pore structure and drying shrinkage of alkali-activated binders10.3390/ma12101673 ↗
55. The effect of activators on the dissolution characteristics and occurrence state of aluminum of alkali-activated metakaolin10.1016/j.conbuildmat.2019.117451 ↗
56. Chloride binding behaviors of metakaolin-lime hydrated blends: influence of gypsum and atmospheric carbonation10.1016/j.conbuildmat.2018.12.162 ↗
57. Investigation of novel waste glass and limestone binders using statistical methods10.1016/j.conbuildmat.2015.02.085 ↗
58. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
59. Hydration products and strength development of calcium hydroxide-based alkali-activated slag mortars10.1016/j.conbuildmat.2011.10.063 ↗
60. The role of CaO and MgO incorporation in chloride resistance of sodium carbonate-activated slag10.1016/j.cemconcomp.2022.104625 ↗
61. Novel procedure of CO2 capture of the CaO sorbent activator on the reaction of one-part alkali-activated slag10.1039/D1RA01353J ↗
62. Effects of gypsum and phosphoric acid on the properties of sodium silicate-based alkali-activated slag pastes10.1016/j.cemconcomp.2003.12.001 ↗
63. Alkali-activated binders based on ground granulated blast furnace slag and phosphogypsum10.1016/j.conbuildmat.2019.04.194 ↗
64. Drying shrinkage, strength and microstructure of alkali-activated high-calcium fly ash using FGD-gypsum and dolomite as expansive additive10.1016/j.cemconcomp.2020.103760 ↗
65. Effect of superabsorbent polymers and expansive additives on the shrinkage of alkali-activated slag10.1016/j.cemconcomp.2021.104218 ↗
66. Effect of superplasticizerson properties of one-part Ca(OH)(2)/Na2SO4 activated geopolymer pastes10.1016/j.conbuildmat.2019.117990 ↗
67. The influence of calcium sulfate form on tee initial hydration of clinkers containing different alkali combinations10.1016/S0008-8846(97)00030-6 ↗
68. Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content10.1016/j.conbuildmat.2018.07.205 ↗
69. Influence of ground granulated blast furnace slag on the early hydration and microstructure of alkali-activated converter steel slag binder10.1007/s10973-020-10220-0 ↗
70. Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers10.1016/j.conbuildmat.2020.120985 ↗
71. Effect of reactive MgO on hydration and properties of alkali-activated slag pastes with different activators10.1016/j.conbuildmat.2020.121608 ↗
72. Internal curing of alkali-activated fly ash-slag pastes using superabsorbent polymer10.1016/j.cemconres.2018.11.018 ↗
73. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
74. Comparative study using Portland cement and calcium carbide residue as a promoter in bottom ash geopolymer mortar10.1016/j.conbuildmat.2016.12.046 ↗
75. Dynamic fracture behavior of alkali-activated mortars: effects of composition, curing time and loading rate10.1016/j.engfracmech.2019.01.017 ↗
76. Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive10.1016/j.conbuildmat.2017.12.034 ↗
77. Strength behavior and autogenous shrinkage of alkali-activated mortar made from low-calcium fly ash and calcium carbide residue mixture10.1016/j.conbuildmat.2021.125438 ↗
78. Effect of waste ceramic powder on properties of alkali-activated blast furnace slag paste and mortar10.3390/polym13162817 ↗
79. New observations on the mechanism of lithium nitrate against alkali silica reaction (ASR)10.1016/j.cemconres.2009.07.017 ↗
80. Relation between activator ratio, hydration products and mechanical properties of alkali-activated slag10.1016/j.conbuildmat.2020.120940 ↗
81. Phase evolution of C-(N)-A-S-H/N-A-S-H gel blends investigated via alkali-activation of synthetic calcium aluminosilicate precursors10.1016/j.cemconres.2016.08.010 ↗
82. Alkali uptake in calcium alumina silicate hydrate (C-A-S-H)10.1016/j.cemconres.2016.03.009 ↗
83. Solubility of ettringite (Ca-6[Al(OH)(6)](2)(SO4)(3) center dot 26H(2)O) at 5-75 degrees C10.1016/S0016-7037(99)00078-2 ↗
84. Acid and sulfate resistance of seawater based alkali activated fly ash: a sustainable and durable approach10.1016/j.conbuildmat.2021.122601 ↗
85. Development the properties of brick geopolymer pastes using concrete waste incorporating dolomite aggregate
86. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes10.1016/S0958-9465(02)00059-8 ↗
87. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
88. FTIR study of the sol-gel synthesis of cementitious gels: C-S-H and N-A-S-H10.1007/s10971-007-1643-6 ↗
89. Effects of the concentrated NH4NO3 solution on mechanical properties and structure of the fly ash based geopolymers10.1016/j.conbuildmat.2012.12.067 ↗
90. Effect of CFBC ash as partial replacement of PCC ash in alkali-activated material10.1016/j.conbuildmat.2020.118383 ↗
91. Effect of alkalis on fresh C-S-H gels. FTIR analysis10.1016/j.cemconres.2009.01.003 ↗
92. Pore structure in concrete exposed to acid deposit10.1016/j.conbuildmat.2013.08.075 ↗
93. Drying shrinkage in alkali-activated binders - a critical review10.1016/j.conbuildmat.2018.09.125 ↗
94. Evaluation of monomer ratio on performance of GGBFS-RHA alkali-activated concretes10.1016/j.conbuildmat.2019.03.026 ↗
95. Influence of different curing methods on mechanical and durability properties of alkali activated binders10.1016/j.conbuildmat.2021.123963 ↗
96. Cracking tendency of alkali-activated slag concrete subjected to restrained shrinkage10.1016/S0008-8846(00)00243-X ↗
97. Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature10.1016/j.proeng.2015.11.066 ↗
98. Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
99. Assessing the impacts of urbanization-associated green space on urban land surface temperature: a case study of Dalian, China10.1016/j.ufug.2017.01.002 ↗
100. Mechanical and microstructural properties of heat cured alkali-activated slag mortars10.1016/j.matdes.2011.10.005 ↗