Digital light processing of zirconia prostheses with high strength and translucency for dental applications
Source abstract
Abstract
Abstract The present study describes the manufacturing of 4 mol% yttria partially stabilized zirconia (4Y-PSZ) prostheses with high mechanical properties and translucency using digital light processing (DLP). To formulate 4Y-PSZ suspensions with high solid loading and appropriate viscosity, as-received granules were calcined at 900 °C for 3 h and then crushed into fine particles. In addition, a mixture of low-viscosity hexanediol diacrylate (HDDA) monomer and decalin as the diluent was employed as the photopolymerizable medium. To achieve strong bonding between layers and high accuracy, the photocuring time during DLP process was optimized. 4Y-PSZ prostheses were almost fully densified after sintering at 1,500 °C for 2 h, which had a relative density of 99.4%. Also, no visible interfaces between the layers were noticed. The sintered 4Y-PSZ samples showed high flexural strength of 831 (±74) MPa and high optical transmittance of 30 (±1.2) %.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Zirconia as a ceramic biomaterial10.1016/S0142-9612(98)00010-6 ↗
2. State of the art of zirconia for dental applications10.1016/j.dental.2007.05.007 ↗
3. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience10.4012/dmj.28.44 ↗
4. Current status of zirconia restoration
5. Additive manufacturing of ceramic-based materials10.1002/adem.201400097 ↗
6. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
7. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization10.1146/annurev-matsci-070115-031841 ↗
8. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
9. Light curing strategies for lithography-based additive manufacturing of customized ceramics
10. Stereolithographic ceramic manufacturing of high strength bioactive glass10.1111/ijac.12325 ↗
11. Porous 45S5 Bioglass®-based scaffolds using stereolithography: effect of partial pre-sintering on structural and mechanical properties of scaffolds10.1016/j.msec.2017.03.001 ↗
12. 3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing10.1007/s10853-018-1992-2 ↗
13. Lithography-based additive manufacturing of cellular ceramic structures10.1002/adem.201200010 ↗
14. Additive manufacturing of ceramics for dental applications: a review10.1016/j.dental.2019.02.026 ↗
15. Fractography of zirconia-specimens made using additive manufacturing (LCM) technology10.1016/j.jeurceramsoc.2017.03.018 ↗
16. Comparative analysis of transmittance for different types of commercially available zirconia and lithium disilicate materials10.4047/jap.2014.6.6.456 ↗
17. Optical properties of translucent zirconia: a review of the literature10.2478/ebtj-2019-0005 ↗
18. Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing10.1016/j.dental.2019.02.001 ↗
19. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing10.1016/j.ceramint.2016.10.027 ↗
20. Porous calcium phosphate ceramic scaffolds with tailored pore orientations and mechanical properties using lithography-based ceramic 3D printing technique10.3390/ma11091711 ↗
21. Fabrication of complex-shaped zirconia ceramic parts via a DLP tereolithography-based 3D printing method10.1016/j.ceramint.2017.11.135 ↗
22. Printing system using dynamic mask projection for fabricating zirconia dental implants10.1080/10426914.2014.984208 ↗
23. Photocurable ceramic slurry using solid camphor as novel diluent for conventional digital light processing (DLP) process10.1016/j.jeurceramsoc.2019.05.069 ↗
24. Dispersion and properties of zirconia suspensions for stereolithography10.1111/ijac.13321 ↗
25. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing10.1016/j.ceramint.2018.09.152 ↗
26. Development of mask-less projection slurry stereolithography for the fabrication of zirconia dental coping10.1007/s12541-014-0608-2 ↗
27. Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing10.1016/j.ceramint.2019.03.024 ↗
28. Development of UV-curable ZrO2 slurries for additive manufacturing (LCMDLP) technology10.1016/j.jeurceramsoc.2019.05.023 ↗
29. Rheological and curing behavior of acrylate-based suspensions for the DLP 3D printing of complex zirconia parts10.3390/ma11122350 ↗
30. Evaluation of cure depth and geometrical overgrowth depending on zirconia volume fraction using digital light processing10.1166/jnn.2019.15971 ↗
31. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing10.1016/j.ceramint.2016.10.027 ↗
32. Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography10.1016/j.ceramint.2017.09.007 ↗
33. Fatigue behavior of 3%Y2O3‐doped ZrO2 ceramics10.1016/j.jmrt.2013.10.005 ↗
34. The clinical success of all-ceramic restorations
35. Novel zirconia materials in dentistry10.1177/0022034517737483 ↗
36. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations10.1016/j.actbio.2019.04.043 ↗
37. Modeling of the influence of chemical composition, sintering temperature, density, and thickness in the light transmittance of four zirconia dental prostheses10.3390/ma12162529 ↗