Dielectric and microwave absorption properties of CB doped SiO2f/PI double-layer composites
Source abstract
Abstract
Abstract Carbon black (CB) with contents of 5.5 wt% and 15 wt% filled quartz glass fiber reinforced polyimide (SiO 2f /PI) composite were designed and prepared. A double-layer absorbing material was designed using the two composites materials as a matching layer and an absorption layer, respectively. The microwave absorption property of single-layer and double-layer composites is calculated according to transmission line theory. The results show that the microwave absorbing property of double-layer composite is better than that of single-layer at the same thickness. When the 5.5 wt%CB doped SiO 2f /PI composite is used as the matching layer with a thickness of 0.7 mm and 15 wt%CB doped SiO 2f /PI composite is used as the absorption layer with a thickness of 0.9 mm, the RL (reflection loss) of the composite reaches a minimum value of −46.18 dB at 16.07 GHz. Meanwhile, the bandwidth of RL ≤ −5 dB is 5.87 GHz and the bandwidth of RL ≤ −10 dB is 3.95 GHz.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Microwave electromagnetic properties of carbonyl iron particles and Si/C/N nano-powder filled epoxy-silicone coating10.1016/j.physb.2009.11.032 ↗
2. Design of radar absorbing structures using glass/epoxy composite containing carbon black in X-band frequency ranges10.1016/j.compositesb.2003.08.011 ↗
3. Complex permittivity, complex permeability and microwave absorption properties of ferrite-polymer composite10.1016/j.jmmm.2006.06.006 ↗
4. Effect of carbon nanofibres dispersion on the microwave absorbing properties of CNF/epoxy composites10.1016/j.compscitech.2008.11.026 ↗
5. Gradient multilayer structural design of CNTs/SiO2 composites for improving microwave absorbing properties10.1016/j.matdes.2010.12.043 ↗
6. Effect of curing on activation energy and dielectric properties of carbon black-epoxy composites at different temperatures10.1016/j.jnoncrysol.2015.04.020 ↗
7. Microwave absorption properties of carbon black and tetrapod-like ZnO whiskers composites10.1016/j.apsusc.2013.08.078 ↗
8. Effect of carbon black content on electrical and microwave absorbing properties of polyaniline/carbon black nanocomposites10.1016/j.polymdegradstab.2007.11.009 ↗
9. Electromagnetic properties of carbon black and barium titanate composite materials10.1016/j.jallcom.2006.12.077 ↗
10. Lowly loaded carbon nanotubes induced high electrical conductivity and giant magneto resistance in ethylene/1-octene co-polymers10.1016/j.polymer.2016.09.056 ↗
11. Control of carbon nanotubes at the interface of a co-continuous immiscible polymer blend to fabricate conductive composites with ultralow percolation thresholds10.1016/j.carbon.2014.02.063 ↗
12. Parallel carbon nanotube stripes in polymer thin film with remarkable conductive anisotropy10.1021/am404758d ↗
13. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
14. Balanced electrical, thermal and mechanical properties of epoxy composites filled with chemically reduced graphene oxide and rubber nanoparticles10.1016/j.compscitech.2015.10.023 ↗
15. Design of electrical conductive composites: tuning the morphology to improve the electrical properties of graphene filled immiscible polymer blends10.1021/am301230q ↗
16. Balance the electrical properties and mechanical properties of carbon black filled immiscible polymer blends with a double percolation structure10.1016/j.compscitech.2016.12.029 ↗
17. A new triple-layered composite for high-performance broadband microwave absorption10.1016/j.compstruct.2014.11.020 ↗
18. Microwave absorption properties of a wave-absorbing coating employing carbonyl-iron powder and carbon black10.1016/j.apsusc.2010.07.078 ↗
19. Effects of carbon black (CB) and alumina oxide on the electromagnetic-and microwave-absorption properties of SiC fiber/aluminum phosphate matrix composites10.1016/j.ceramint.2014.07.113 ↗
20. Microwave-absorbing properties of Co-filled carbon nanotubes10.1016/j.materresbull.2007.10.016 ↗
21. Absorbing properties and structural design of microwave absorbers based on carbonyl iron and barium ferrite10.1016/j.jmmm.2007.04.012 ↗
22. microwave absorbers of two-layer composites laminate for wide oblique incidence angles10.1016/j.matdes.2009.09.054 ↗
23. Double-layer microwave absorber based on ferrite and short carbon fiber composites10.1016/j.matchemphys.2007.04.056 ↗
24. Absorbing properties and structural design of microwave absorbers based on carbonyl iron and barium ferrite10.1016/j.jmmm.2007.04.012 ↗
25. Optimization of electromagnetic matching of carbonyl iron/BaTiO3 composites for microwave absorption10.1016/j.jmmm.2010.10.021 ↗
26. Electromagnetic and microwave absorption properties of SiO2-coated Ti3SiC2 powders with higher oxidation resistance10.1016/j.jallcom.2017.04.301 ↗
27. Enhanced microwave absorbing properties of 2.5D SiCf/SiC composites fabricated by a modified precursor infiltration and pyrolysis process10.1016/j.jallcom.2015.03.031 ↗
28. Island-like nickel/carbon nanocomposites as potential microwave absorbers-Synthesis via in situ solid phase route and investigation of electromagnetic properties10.1016/j.jallcom.2015.04.198 ↗
29. Facile synthesis and microwave absorption properties of double loss Ti3SiC2/Co3Fe7 powders10.1016/j.ceramint.2017.10.144 ↗
30. Temperature-dependent dielectric and microwave absorption properties of SiCf/SiC-Al2O3 composites modified by thermal cross-linking procedure10.1016/j.jeurceramsoc.2015.04.016 ↗
31. Double-layer microwave absorber based on CoFe2O4 ferrite and carbonyl iron composites10.1016/j.jallcom.2013.09.049 ↗