Effects of solid loading on stereolithographic additive manufactured ZrO2 ceramic: A quantitative defect study by X-ray computed tomography
Source abstract
Abstract
Abstract In this study, the effects of solid loading on the defects and mechanical performance of stereolithographic additive manufactured ZrO2 ceramic were studied by X-ray computed tomography (X-CT). ZrO2 ceramics were fabricated by stereolithographic additive manufacturing from suspensions with different solid loading. The geometrical features and distribution of the defects within the ceramic were quantitatively characterized, classified, and analyzed, the formation mechanism were discussed. The correlations between the defects and mechanical properties were also investigated, and the effects of solid loading on the performance of ZrO2 ceramic were revealed. The authors want to give a method, X-CT, for the defect characterization among stereolithographic additive manufactured ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
2. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
3. Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres10.1016/j.ceramint.2019.10.144 ↗
4. Additive manufacturing of functionally graded materials: a review10.1016/j.msea.2019.138209 ↗
5. The grinding force modeling and experimental study of ZrO2 ceramic materials in ultrasonic vibration assisted grinding10.1016/j.ceramint.2019.01.216 ↗
6. Microstructure and properties of 3D-printed alumina ceramics with different heating rates in vacuum debinding10.1007/s12598-020-01372-x ↗
7. Polymer-derived SiOC ceramic lattice with thick struts prepared by digital light processing
8. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing10.1016/j.ceramint.2018.09.152 ↗
9. Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology10.1016/j.ceramint.2020.01.152 ↗
10. Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing10.1016/j.msea.2019.138537 ↗
11. Stereolithography additive manufacturing of multi-ceramic triangle structures with tunable thermal expansion10.1016/j.jeurceramsoc.2020.11.033 ↗
12. Effects of fine grains and sintering additives on stereolithography additive manufactured Al2O3 ceramic10.1016/j.ceramint.2020.09.071 ↗
13. Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror10.1016/j.ceramint.2020.04.196 ↗
14. Stereolithography additive manufacturing and sintering approaches of SiC ceramics10.1016/j.oceram.2020.100046 ↗
15. Dispersion and stability of SiC ceramic slurry for stereolithography10.1016/j.ceramint.2019.10.203 ↗
16. Additive manufacturing of hydroxyapatite bioceramic scaffolds: dispersion, digital light processing, sintering, mechanical properties, and biocompatibility10.1007/s40145-020-0375-8 ↗
17. Flexural strength and Weibull analysis of Y-TZP fabricated by stereolithographic additive manufacturing and subtractive manufacturing10.1016/j.jeurceramsoc.2019.10.058 ↗
18. Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing10.1016/j.dental.2019.02.001 ↗
19. Fractography of zirconia-specimens made using additive manufacturing (LCM) technology10.1016/j.jeurceramsoc.2017.03.018 ↗
20. X-ray computed tomography for additive manufacturing: a review10.1088/0957-0233/27/7/072001 ↗
21. Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking10.1016/j.actamat.2013.10.014 ↗
22. Porosity quantification for ductility prediction in high pressure die casting AM60 alloy using 3D X-ray tomography10.1016/j.msea.2019.138781 ↗
23. In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography10.1016/j.scriptamat.2015.11.017 ↗
24. Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography10.1016/j.msea.2020.139981 ↗
25. In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PμSL) 3D printing technique: defects characterization and in-situ shear test10.1016/j.compstruct.2020.112710 ↗
26. In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials10.1007/s10853-015-9355-8 ↗
27. Stress field and damage evolution in C/SiC woven composites: image-based finite element analysis and in situ X-ray computed tomography tests10.1016/j.jeurceramsoc.2020.12.026 ↗
28. Detection of small delamination in mullite/Si/SiC model EBC system by pulse thermography10.1007/s40145-019-0327-3 ↗
29. In situ quantitative three-dimensional characterization of sub-indentation cracking in polycrystalline alumina10.1016/j.jeurceramsoc.2014.04.002 ↗
30. Bending fracture behavior of freestanding (Gd0.9Yb0.1) 2Zr2O7 coatings by using digital image correlation and FEM simulation with 3D geometrical reconstruction10.1007/s40145-019-0340-6 ↗
31. First direct 3D visualization of microstructural evolutions during sintering through X-ray computed microtomography10.1016/j.actamat.2004.09.027 ↗
32. X-ray tomography of additive-manufactured zirconia: processing defects - strength relations10.1016/j.jeurceramsoc.2019.04.010 ↗
33. Digital light processing of 3Y-TZP strengthened ZrO2 ceramics10.1016/j.msea.2019.138768 ↗
34. The DLVO theory in microbial adhesion10.1016/S0927-7765(99)00029-6 ↗
35. Adhesion of nano-sized particles to the surface of bacteria: mechanistic study with the extended DLVO theory10.1016/j.colsurfb.2012.04.031 ↗
36. Progress in stabilized dispersion of ceramic slurries
37. The influence of ingredients of silica suspensions and laser exposure on UV curing behavior of aqueous ceramic suspensions in stereolithography10.1007/s00170-010-2746-8 ↗
38. Properties of selective laser melted alumina-spodumene composite10.1016/j.ceramint.2018.07.144 ↗
39. Munz · 1999
40. X-ray microtomography investigations on the residual pore structure in silicon nitride bars manufactured by direct ink writing using different printing patterns10.1016/j.oceram.2020.100042 ↗