On the elastic deformation properties of porous ceramic materials obtained by pore-forming agent method
Source abstract
Abstract
Abstract The influence of the pore size distribution on the elastic modulus has been studied using an intermingled fractal model (IFU) capable to reproduce entirely pore size distribution of materials. The results obtained from IFU modelling are in good agreement with experimental ones. The model could be considered as a microstructure simulator to improve mechanical properties of porous ceramic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Injection Molding Process and Properties · Composite Material Mechanics · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Effect of starch addition on microstructure and properties of highly porous alumina ceramics10.1016/j.ceramint.2013.04.072 ↗
2. Porous silica ceramics with relatively high strength and novel bi-modal pore structure prepared by a TBA-based gel-casting method10.1016/j.ceramint.2011.09.013 ↗
3. Preparation of porous Y2SiO5 ceramics with relatively high compressive strength and ultra-low thermal conductivity by a TBA-based gel-casting method10.1016/j.ceramint.2012.07.014 ↗
4. Ceramic tiles with controlled porosity and low thermal conductivity by using pore-forming agents10.1016/j.ceramint.2014.03.163 ↗
5. Processing and microstructure characterization of porous corundum–spinel ceramics prepared by in situ decomposition pore-forming technique10.1016/j.ceramint.2007.03.018 ↗
6. A study on preparation of cordierite gradient pores porous ceramics from rectorite10.1016/j.solidstatesciences.2011.02.015 ↗
7. Humidity control porous ceramics prepared from waste and porous materials10.1016/j.matlet.2011.01.006 ↗
8. Regeneration of trabecular bone using porous ceramics10.1016/j.cossms.2003.09.012 ↗
9. Design and preparation of high permeability porous mullite support for membranes by in-situ reaction
10. Preparation and properties of reticulated porous γ-Y2Si2O7 ceramics with high porosity and relatively high strength10.1016/j.ceramint.2014.02.100 ↗
11. Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size10.1016/j.ceramint.2014.10.032 ↗
12. Porosity and oxide layer dependence of thermal shock behavior of porous silicon nitride ceramics10.1016/j.jmst.2014.11.004 ↗
13. Ceramics for oculo-orbital surgery10.1016/j.ceramint.2014.12.086 ↗
14. Effects of sintering behavior on piezoelectric properties of porous PZT ceramics10.1016/j.ceramint.2013.07.110 ↗
15. Acoustic and thermal performances of ceramic tiles and tiling systems10.1016/j.ceramint.2015.03.032 ↗
16. Low cost porous mullite-corundum ceramics by gelcasting10.1023/A:1017961414108 ↗
17. Al2O3 ceramics with well-oriented and hexagonally ordered pores: the formation of microstructures and the control of properties10.1016/j.jeurceramsoc.2012.04.013 ↗
18. A novel method of coating a particle-stabilized alumina foam on a porous alumina substrate10.1016/j.matlet.2012.08.007 ↗
19. Effect of polystyrene addition on freeze casting of ceramic/camphene slurry for ultra-high porosity ceramics with aligned pore channels10.1111/j.1551-2916.2006.01311.x ↗
20. Novel freeze-casting fabrication of aligned lamellar porous alumina with a centrosymmetric structure10.1016/j.jeurceramsoc.2014.05.040 ↗
21. High-strength porous Si3N4 ceramics prepared by freeze casting and silicon powder nitridation process10.1016/j.matlet.2014.06.176 ↗
22. Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents10.1016/j.ceramint.2014.03.182 ↗
23. Macroporous calcium phosphate glass-ceramic prepared by two-step pressing technique and using sucrose as a pore former10.1007/s10856-005-2611-8 ↗
24. Preparation and properties of porous alumina ceramics with oriented cylindrical pores produced by an extrusion method10.1016/j.jeurceramsoc.2004.11.015 ↗
25. Preparation of porous mullite–corundum ceramics with controlled pore size using bioactive yeast as pore-forming agent10.1016/j.matlet.2013.11.067 ↗
26. Fabrication of porous substrates: a review of processes using pore forming agents in the biomaterial field10.1002/jps.21059 ↗
27. Sago starch as binder and pore-forming agent for the fabrication of porcelain foam10.1016/j.ceramint.2013.09.023 ↗
28. Porous ceramics prepared using poppy seed as a pore-forming agent10.1016/j.ceramint.2006.05.019 ↗
29. Preparation and characterization of porous alumina ceramics through starch consolidation casting technique10.1016/j.ceramint.2012.02.057 ↗
30. The effects of the early carbonation curing on the mechanical and porosity properties of high initial strength Portland cement pastes10.1016/j.conbuildmat.2014.12.072 ↗
31. Thermal and mechanical properties of fibrous zirconia ceramics with ultra-high porosity10.1016/j.ceramint.2014.04.008 ↗
32. Influence of porosity on compressive and tensile strength of cement mortar10.1016/j.conbuildmat.2012.11.072 ↗
33. Influence of pore structures on the mechanical behavior of low-permeability sandstones: numerical reconstruction and analysis10.1007/s40789-014-0020-7 ↗
34. Fractal analysis and its impact factors on pore structure of artificial cores based on the images obtained using magnetic resonance imaging10.1016/j.jappgeo.2012.07.015 ↗
35. S.-C. Kou, C.-S. Poon, M. Etxeberria, Influence of recycled aggregates on long term mechanical properties and pore size distribution of concrete, Cem. Concr. Compos. 33 (2011) 286–291. 10.1016/j.cemconcomp.2010.10.003.10.1016/j.cemconcomp.2010.10.003 ↗
36. Elastic properties of model porous ceramics10.1111/j.1151-2916.2000.tb01680.x ↗
37. Performance simulation and quantitative analysis of cement-based materials subjected to leaching10.1016/j.commatsci.2010.08.002 ↗
38. A fuzzy model for classifying mechanical properties of vesicular basalt used in prehistoric buildings10.1016/j.matchar.2007.05.001 ↗
39. A generalized model for the effective thermal conductivity of unsaturated porous media based on self-similarity10.1615/JPorMedia.v10.i6.30 ↗
40. A generalized model for the effective thermal conductivity of porous media based on self-similarity10.1088/0022-3727/37/21/014 ↗
41. Predicting the initial rate of water absorption in clay bricks10.1016/j.conbuildmat.2009.01.009 ↗
42. An intermingled fractal units model to evaluate pore size distribution influence on thermal conductivity values in porous materials10.1016/j.applthermaleng.2014.01.037 ↗
43. B.B. Mandelbrot, The Fractal Geometry of Nature, (2004).
44. Falconer · 2003
45. Permeability from porosimetry measurements, derivation for a tortuous and fractal tubular bundle10.1016/j.petrol.2013.04.016 ↗
46. Prediction of relative permeability in unsaturated porous media with a fractal approach10.1016/j.ijheatmasstransfer.2013.05.003 ↗
47. Generalized modeling of spontaneous imbibition based on Hagen–Poiseuille flow in tortuous capillaries with variably shaped apertures10.1021/la5007204 ↗
48. A fractal streaming current model for charged microscale porous media10.1016/j.elstat.2014.08.005 ↗
49. Fractal modeling of capillary pressure curves for The Geysers rocks10.1016/j.geothermics.2006.02.001 ↗
50. Intermingled fractal units model and electrical equivalence fractal approach for prediction of thermal conductivity of porous materials10.1016/j.applthermaleng.2013.07.031 ↗
51. Case studies on the influence of microstructure voids on thermal conductivity in fractal porous media10.1016/j.csite.2013.10.001 ↗
52. An intermingled fractal units model and method to predict permeability in porous rock10.1016/j.ijengsci.2013.11.002 ↗
53. Assessment of steady state diffusion of volatile organic compounds in unsaturated building materials based on fractal diffusion model10.1016/j.buildenv.2014.11.016 ↗
54. Role of pore structure on liquid flow behaviors in porous media characterized by fractal geometry
55. Fractal and multifractal analysis on pore structure in cement paste10.1016/j.conbuildmat.2014.07.065 ↗
56. Mechanical properties of cermet composites with various geometrical tortuosity of metal phase: fractal characterization10.1016/j.msea.2014.04.001 ↗
57. Surface wear resistance of chemically or thermally stabilized earth-based materials10.1617/s11527-007-9278-1 ↗
58. Fractal modelling of medium–high porosity SiC ceramics10.1016/j.jeurceramsoc.2008.03.039 ↗
59. A geometrical fractal model for the porosity and thermal conductivity of insulating concrete10.1016/j.conbuildmat.2013.03.049 ↗
60. Porous ceramic materials by pore-forming agent method: an intermingled fractal units analysis and procedure to predict thermal conductivity10.1016/j.ceramint.2015.01.069 ↗
61. Mechanical properties, pore size distribution, and pore solution of fly ash–belite cement mortars10.1016/S0008-8846(99)00161-1 ↗
62. Fabrication and properties of cordierite–mullite bonded porous SiC ceramics10.1016/j.ceramint.2013.11.078 ↗