In-situ synthesis of high-performance Al2O3-based ceramic cores reinforced with core-shell structures
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Gelcasting of alumina based ceramic cores containing yttria for single crystal and directional solidification blades10.1179/174367609X422045 ↗
2. Shrinkage and flexural strength improvement of silica-based composites for ceramic cores by colloidal alumina infiltration10.1016/j.ceramint.2016.02.137 ↗
3. Effect of silica sol on the properties of alumina-based ceramic core composites10.1016/j.msea.2008.12.016 ↗
4. Effect of sintering temperature in argon atmosphere on microstructure and properties of 3D printed alumina ceramic cores10.1007/s40145-020-0362-0 ↗
5. Enhanced thermal properties of silica-based ceramic cores prepared by coating alumina/mullite on the surface of fused silica powders10.1016/j.ceramint.2020.01.216 ↗
6. Dimensional changes and creep of silica core ceramics used in investment casting of superalloys10.1023/A:1020060508311 ↗
7. Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting10.1016/j.jmatprotec.2009.07.002 ↗
8. Effects of alumina on cristobalite crystallization and properties of silica-based ceramic cores10.1016/j.jmst.2016.02.012 ↗
9. Effect of in situ synthesised mullite whiskers on the high-temperature strength of Al2O3-based ceramic moulds for casting hollow turbine blades10.1016/j.ceramint.2016.09.031 ↗
10. Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration
11. Effect of sintering temperature on surface morphology and roughness of 3D-printed silicon ceramic cores10.15541/jim20210654 ↗
12. Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography10.1007/s40145-021-0513-y ↗
13. Effects of adding aluminum oxide or zirconium oxide fibers on ceramic molds for casting hollow turbine blades10.1007/s00170-014-5723-9 ↗
14. Dimensional variations of castings and moulds in the ceramic mould casting process10.1016/j.jmatprotec.2007.01.030 ↗
15. Improvement of ceramic core strength by combining 3D printing technology and an organic-inorganic conversion process using dual polymers10.1016/j.ceramint.2021.03.083 ↗
16. Balancing flexural strength and porosity in DLP-3D printing Al2O3 cores for hollow turbine blades10.1016/j.jmst.2021.05.077 ↗
17. Improved mechanical properties of silica ceramic cores prepared by 3D printing and sintering processes10.1016/j.scriptamat.2020.113665 ↗
18. Fused silica ceramic core based on network-structured zircon design via 3D printing10.1016/j.scriptamat.2021.114342 ↗
19. Dense ceramics with complex shape fabricated by 3D printing: a review10.1007/s40145-020-0444-z ↗
20. J. Liu, Q. Li, M. Huo, X. Zhang, X. Yue, J. Liang, J. Li, Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores, Ceram. Int. Doi: 10.1016/j.ceramint.2022.06.301.10.1016/j.ceramint.2022.06.301 ↗
21. Direct ink writing additive manufacturing of porous alumina-based ceramic cores modified with nanosized MgO10.1016/j.jeurceramsoc.2020.07.058 ↗
22. Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum10.1016/j.jeurceramsoc.2019.11.047 ↗
23. Effect of silicone resin as precursor and binder on the properties of alumina-based ceramic cores using ball-shaped powders10.1016/j.ceramint.2018.10.127 ↗
24. Effect of silica fiber on the mechanical and chemical behavior of alumina-based ceramic core material10.1016/j.jascer.2017.09.002 ↗
25. Fabrication and properties of porous alumina-based ceramic core10.3724/SP.J.1077.2012.00239 ↗
26. The effect of cristobalite seed on the crystallization of fused-silica based ceramic core-A kinetic study10.1016/0272-8842(95)90909-3 ↗
27. Silica strengthened alumina ceramic cores prepared by 3D printing10.1016/j.jeurceramsoc.2020.11.050 ↗
28. Enhanced 3D printed Al2O3 core via in-situ mullite
29. Effect of CaO and SiO2 on the properties of Y2O3-based ceramic core materials10.1080/21870764.2021.1939242 ↗
30. Thermal behavior of integral Al2O3-based ceramic molds for fabricating gas turbine blades
31. Influence of yttrium oxide addition and sintering temperature on properties of alumina-based ceramic cores10.1111/ijac.13426 ↗
32. Fabrication and characterization of Si3N4 reinforced Al2O3-based ceramic tool materials10.1016/j.ceramint.2015.06.115 ↗
33. Thermochemical stability of the Y2O3-SiO2 system10.1016/j.jeurceramsoc.2009.09.007 ↗
34. Application of Nd2O3-Al2O3-SiO2 glass solder for joining of silicon carbide components10.1016/j.jeurceramsoc.2016.01.020 ↗
35. Thermodynamic reassessment of the Y2O3-Al2O3-SiO2 system and its subsystems10.1016/j.calphad.2008.03.003 ↗
36. Liang · 1993
37. Fine lattice structural titanium dioxide ceramic produced by DLP 3D printing10.1016/j.ceramint.2019.07.346 ↗
38. Mechanical properties and microstructures of 3D printed bulk cordierite parts10.1016/j.ceramint.2019.06.174 ↗
39. Spherical red-emitting X-1-Y2SiO5:Eu and alpha-Y2Si2O7:Eu phosphors with high color purity: the evolution of morphology, phase and photoluminescence upon annealing10.1016/j.ceramint.2021.12.075 ↗
40. Sol-Gel synthesis and phase evolution studies of yttrium silicates10.1016/j.ceramint.2019.03.157 ↗
41. Preparation, characterization, and sinterability of well-defined silica/yttria powders10.1557/JMR.1994.0436 ↗
42. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
43. Effective diffusion coefficients in solid-state sintering10.1016/j.actamat.2004.02.042 ↗
44. Effect of dual liquid phase sintering aids on the densification and microstructure of low temperature sintered alumina ceramics10.1016/j.ceramint.2021.11.153 ↗
45. Liquid-phase redistribution during sintering of 8 mol% yttria-stabilized zirconia10.1016/S0955-2219(02)00151-6 ↗
46. Liquid phase sintering of SiC with additions of Y2O3, Al2O3 and SiO210.1016/j.jeurceramsoc.2003.09.002 ↗
47. Liquid phase sintering of Al2O3/SiC nanocomposites10.1016/S0955-2219(98)00252-0 ↗
48. Growth and luminescence characteristics of cerium-doped yttrium pyrosilicate single crystal10.1016/j.jallcom.2009.09.141 ↗
49. Fast relaxation intensity versus silica glass density: existence of sharp peculiarity10.1088/0953-8984/18/19/027 ↗
50. Quantitative relationship between the density and structural unit of alpha alumina prepared from gibbsite and boehmite10.1016/j.ceramint.2021.02.025 ↗
51. Producing ceramic foams with hollow spheres10.1111/j.1151-2916.2004.tb19965.x ↗
52. Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing
53. Effect of Zr doping on the high-temperature stability of SiO2 glass10.1016/j.commatsci.2018.01.051 ↗
54. Fabrication of CrSi2/MoSi2/SiC-Mo2C gradient composite coating on Mo substrate and the stabilizing effect of Cr on the coating's anti-oxidation properties10.1016/j.surfcoat.2015.10.015 ↗
55. A phase-inversion casting process for preparation of tubular porous alumina ceramic membranes10.1016/j.jeurceramsoc.2015.04.026 ↗
56. Fabrication of Y2Si2O7 coating and its oxidation protection for C/SiC composites10.1016/S1003-6326(17)60044-X ↗
57. Thermal shock resistance of gamma-Y2Si2O7/Y2O3-Al2O3-SiO2 coating for porous Si3N4 ceramics10.1016/j.surfcoat.2018.09.078 ↗