Dielectric properties, microstructure and charge compensation of MnO2-doped BaTiO3-based ceramics in a reducing atmosphere
Source abstract
Abstract
Abstract Based on the relationship of dipole formation and charge compensation, we prepared BaTiO3-based (x%MnO2-0.05%Nb2O5–BaTiO3, x%Mn–Nb-BT) ceramics using a solid-phase reaction in air and a reducing atmosphere. The influences of MnO2 doping and sintering atmospheres on crystal structure, charge compensation and dielectric properties were comprehensively studied. The ion substitution mechanism, solid solubility, and crystallinity of x%Mn–Nb-BT ceramics in different atmospheres were resolved by X-ray diffraction (XRD) and electron paramagnetic resonance (EPR) spectroscopy. X-ray photoelectron spectroscopy (XPS) showed that the percentages of oxygen vacancy and Ti3+ in this system were both affected by MnO2 doping and the atmosphere due to the reducibility of Mn4+ and the reducing atmosphere. Thus, the influence of doped MnO2 and the atmosphere on dipole formation and charge compensation was deeply discussed. These results provide further insight into the important role of MnO2 in improving the anti-reduction performance of BT-based ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Enhanced dielectric properties of La-doped 0.75BaTiO3-0.25Bi(Mg0.5Ti0.5)O3 ceramics for X9R-MLCC application10.1016/j.ceramint.2020.10.009 ↗
2. Microstructural evolution of electrodes in sintering of multi-layer ceramic capacitors (MLCC) observed by synchrotron X-ray nano-CT10.1016/j.actamat.2020.116605 ↗
3. Superior temperature‐stable dielectrics for MLCC s based on Bi0.5Na0.5TiO3‐NaNbO3 system modified by CaZrO310.1111/jace.15519 ↗
4. Characterization of precipitates formed in X7R 0603 BME-MLCC during sintering10.1016/j.ceramint.2020.08.135 ↗
5. Application of chloride metallurgy and corona electrostatic separation for recycling waste multilayer ceramic capacitors10.1021/acssuschemeng.7b02190 ↗
6. Correlation between tetragonality (c/a) and direct current (dc) bias characteristics of BaTiO3-based multi-layer ceramic capacitors (MLCC)10.1039/D0TC02067B ↗
7. Novel approach of in-situ nickel capture technology to recycle silver and palladium from waste nickel-rich multilayer ceramic capacitors10.1016/j.jclepro.2020.125650 ↗
8. Dielectric and anti-reduction properties of (1-x)BaTiO3-xBi(Zn0.5Y0.5)O2.75 ceramics for BME-MLCC application10.1016/j.jallcom.2019.04.277 ↗
9. Temperature dependent, large electromechanical strain in Nd-doped BiFeO3-BaTiO3 lead-free ceramics10.1016/j.jeurceramsoc.2016.10.027 ↗
10. Improved strain and transduction values of low-temperature sintered CuO-doped PZT-PZNN soft piezoelectric materials for energy harvester applications10.1016/j.ceramint.2020.11.008 ↗
11. Structure, electrical and dielectric properties of Ca substituted BaTiO3 ceramics10.1016/j.ceramint.2018.03.111 ↗
12. Effects of addition of Sc2O3 on microstructure and dielectric properties of BaTiO3-based X8R MLCCs10.1016/j.jpcs.2018.11.019 ↗
13. Role of yttrium and magnesium in the formation of core-shell structure of BaTiO3 grains in MLCC10.1016/j.jeurceramsoc.2007.09.042 ↗
14. Base-metal electrode-multilayer ceramic capacitors: past, present and future perspectives10.1143/JJAP.42.1 ↗
15. Effects of grain size and temperature on the energy storage and dielectric tunability of non-reducible BaTiO3-based ceramics10.1016/j.jeurceramsoc.2018.11.034 ↗
16. High temperature stability and mechanical quality factor of donor-acceptor co-doped BaTiO3 piezoelectrics10.1016/j.actamat.2019.09.045 ↗
17. Ferroelectric properties of Li‐doped BaTiO3 ceramics10.1111/jace.15480 ↗
18. Fabrication, structure, and frequency-dependent electrical and dielectric properties of Sr-doped BaTiO3 ceramics10.1016/j.ceramint.2019.09.208 ↗
19. The effect of Sm and Nb on impedance spectroscopy and high frequency modulus, complex modulus, conductivity studies of BaTiO3-Li0.5Fe2.5O4 ceramics10.1016/j.matchemphys.2019.04.010 ↗
20. Enhanced dielectric properties of BaTiO3 based on ultrafine powders by two-step calcination10.1016/j.physb.2019.02.002 ↗
21. Colossal permittivity and dielectric relaxations in BaTi0.99(Nb0.5Ga0.5)0.02O3 ceramics10.1016/j.ceramint.2015.03.303 ↗
22. Influence of Gd/Nb on activation energy, relaxation response, impedance, Nyquist plots and dielectric studies at high frequency of BaTiO3-Li0.5Fe2.5O4 solid compounds10.1016/j.rinp.2020.103196 ↗
23. Colossal permittivity (Nb, Mg) co-doped BaTiO3 ceramics with excellent temperature stability and high insulation resistivity10.1016/j.ceramint.2020.12.154 ↗
24. Tuning electrical conductivity, charge transport, and ferroelectricity in epitaxial BaTiO3 films by Nb-doping10.1063/1.4982655 ↗
25. Size effect on structure and dielectric properties of Nb-doped barium titanate10.1016/S0924-0136(03)00371-6 ↗
26. Niobium doping effect on BaTiO3 structure and dielectric properties10.1016/j.ceramint.2019.12.043 ↗
27. Chemical nature of giant strain in Mn-doped 0.94(Na0.5Bi0.5)TiO3-0.06BaTiO3 lead-free ferroelectric single crystals10.1016/j.scriptamat.2013.11.017 ↗
28. Investigation of MnO2‐doped (Ba, Ca)TiO3 lead‐free ceramics for high power piezoelectric applications10.1111/jace.14894 ↗
29. Effect of MnO2 on the dielectric properties of Nb-doped BaTiO3-(Bi0.5Na0.5)TiO3 ceramics for X9R MLCC applications10.1111/jace.16157 ↗
30. Significantly enhanced dielectric breakdown strength and energy density of multilayer ceramic capacitors with high efficiency by electrodes structure design10.1063/1.5110527 ↗
31. The influence of Mn on the grain‐boundary potential barrier characteristics of donor‐doped BaTiO3 ceramics10.1063/1.345567 ↗
32. Decisive role of oxygen vacancy in ferroelectric versus ferromagnetic Mn-doped BaTiO3 thin films10.1063/1.3576125 ↗
33. Multifunctional BaTiO3-(Bi0.5Na0.5)TiO3-based MLCC with high-energy storage properties and temperature stability10.1111/jace.16292 ↗
34. Influences of annealing temperature on structural characterization and magnetic properties of Mn-doped BaTiO3 ceramics10.1063/1.4733691 ↗
35. Comparison of multi-valent manganese oxides (Mn4+, Mn3+, and Mn2+) doping in BiFeO3-BaTiO3 piezoelectric ceramics10.1016/j.jeurceramsoc.2019.07.013 ↗
36. Colossal permittivity of (Mg+Nb) co-doped TiO2 ceramics with low dielectric loss10.1039/C7TC01020F ↗
37. Resistive switching and redox process at the BaTiO3/(La, Sr)MnO3 multiferroic‐type interface10.1002/aelm.202000723 ↗
38. Grain growth control in Nb-doped BaTiO310.1016/j.jmatprotec.2005.02.246 ↗
39. Investigation of improved reliability in BaTiO3‐based ceramics via two‐step sintering by impedance spectroscopy and Schottky barrier model
40. High-performance flexible transparent p-CuI film by optimized solid iodization10.1016/j.vacuum.2020.109862 ↗
41. Atomic structure, electronic structure, and defect energetics in [001](310)Σ5 grain boundaries of SrTiO3 and BaTiO310.1103/PhysRevB.78.245320 ↗
42. The densification behavior of flash sintered BaTiO310.1016/j.scriptamat.2020.05.005 ↗
43. Colossal permittivity Ti1–x(Eu0.5Ta0.5)xO2 ceramics with excellent thermal stability10.1021/acsaelm.0c00240 ↗
44. Ionic to electronic transport in Ba3Ti3O6(BO3)2 under reducing atmosphere10.1021/acsaem.7b00124 ↗
45. Influence of sintering method on the PTCR effect and microstructures of Sm2O3-doped BaTiO3-based ceramics sintered in a reducing atmosphere10.1016/j.ceramint.2017.05.246 ↗
46. The effect of multivalent ions on BaTiO3-based ceramics with non-reducibility10.1016/j.matlet.2019.127191 ↗
47. Electrical properties, EPR analyses and defect chemistry of Mn-doped 0.675PMN-0.325PT piezoceramics10.1016/j.ceramint.2020.08.069 ↗
48. Structure and magnetic properties of Cr-doped tin monoxide prepared by hydrothermal method10.1016/j.ceramint.2020.02.114 ↗