Electrical properties and aging behavior of Na-doped Mn1.95Co0.21Ni0.84O4 NTC ceramics
Source abstract
Abstract
Abstract Negative temperature coefficient (NTC) thermistors based on Mn1.95-x Co0.21Ni0.84NaxO4 (x = 0, 0.03, 0.06, 0.09) were prepared by a co-precipitation method, in combination with a solid-state reaction. X-ray diffraction (XRD) showed that the ceramics were composed mainly of spinel NiMn2O4 with some Na0.7MnO2.05 for Na-doping with x = 0.06. The grain size and resistivity of the ceramic samples is seen to first decrease and then increase with Na ion content. Furthermore, the value of ρ298K, B298/323 constant, and Ea of the ceramic samples are 1602–3118 Ω cm, 3693–3820 K, and 0.3182–0.3292 eV, respectively. The relative resistivity shift is 0.05% for Na doped sample with x = 0.06 when compared to 0.3% for Na-free ceramics. It is demonstrated that Na-doping could be an efficient way to decrease the resistivity and improve electrical stability of Mn–Co–Ni– Na–O oxide based NTC ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective perspective10.1111/j.1551-2916.2009.02990.x ↗
2. Fabrication and electrical properties of the fast response Mn1.2Co1.5Ni0.3O4 miniature NTC chip thermistors10.1016/j.ceramint.2018.09.177 ↗
3. The effect of ZnO content and sintered temperature on the electrical properties of Cu-containing Mn1.95-xNi0.45Co0.15Cu0.45ZnxO4 NTC thermistors10.1016/j.jallcom.2008.07.076 ↗
4. Bismuth trioxide-tailored sintering temperature, microstructure and NTCR characteristics of Mn1.1Co1.5Fe0.4O4 ceramics10.1039/C9RA04676C ↗
5. Improvement of aging issue in Zn0.4Fe2.1Co2Mn1.5O8 thermistor films10.1016/j.jeurceramsoc.2019.05.068 ↗
6. Preparation and characterization of Fe3+-doped Ni0.9Co0.8Mn1.3-xFexO4 (0≤x≤0.7) negative temperature coefficient ceramic materials10.1016/j.mee.2011.04.023 ↗
7. Preparation and characterization of Ni-Co-Zn-Mn-O negative temperature coefficient thermistors with B2O3 addition10.1007/s10854-019-02093-3 ↗
8. Core-shell NTC materials with low thermal constant and high resistivity for wide–temperature thermistor ceramics10.1111/jace.16418 ↗
9. Preparation and electrical properties of sintered oxides composed of Mn1.5Co(0.25+x)Ni(1.25-x)O4(0≤x≤0.75) with a cubic spinel structure10.1007/s10853-006-1141-1 ↗
10. Aging of NTC ceramics in the system Mn–Ni–Fe–O10.1016/S0955-2219(01)00117-0 ↗
11. Sintering temperature and XPS analysis of Co2.77Mn1.71Fe1.10Zn0.42O8 NTC ceramics10.1016/j.matchemphys.2019.122098 ↗
12. An efficient way to improve the electrical stability of Ni0.6Si0.2Al0.6Mn1.6O4 NTC thermistor10.1016/j.ceramint.2011.03.061 ↗
13. Aging improvement in Cu-containing NTC ceramic prepared by co-precipitation method10.1016/j.jallcom.2013.08.014 ↗
14. Influence of copper substitution on structural, electrical and dielectric properties of Ni(1−x)CuxMn2O4 (0 ≤ x ≤ 1) ceramics10.1016/j.jallcom.2010.07.143 ↗
15. Electrical properties and temperature sensitivity of Li/Mg modified Ni0.7Zn0.3O based ceramics10.1016/j.jallcom.2018.05.210 ↗
16. Li/Fe modified Zn0.3Ni0.7ONTC thermistors with adjustable resistivities and temperature sensitivity10.1007/s10854-017-7922-2 ↗
17. NTC thermo-sensitive ceramics with low B value and high resistance at low temperature in Li-doped Mn0.6Ni0.9Co1.5O4 system10.1007/s10854-019-02654-6 ↗
18. Two-step sintering of submicro-grain Ni0.54Mn1.26Fe1.2O4 NTC ceramics with an excellent electrical performance10.1007/s10854-019-02388-5 ↗
19. Influence of B3+-and Na+-ions on electrical property and temperature sensitivity of NiO-based ceramics10.1007/s10854-018-00588-z ↗
20. Effect of Fe incorporation on cation distributions and hopping conductions in Ni-Mn-Co-O spinel oxides10.1016/j.jallcom.2017.10.216 ↗
21. Effects of Cu and Zn co-doping on the electrical properties of Ni0.5Mn2.5O4 NTC ceramics10.1016/j.jeurceramsoc.2007.06.007 ↗
22. Influence of grain interior and grain boundaries on transport properties of scandium-doped calcium zirconate10.1111/jace.16968 ↗
23. Increasing strength and ductility of a Mg–9Al alloy by dynamic precipitation assisted grain refinement during multi-directional forging10.1016/j.msea.2020.139192 ↗
24. Effect of polarization on Sr and Zr diffusion behavior in LSCF/GDC/YSZ system10.1016/j.ssi.2014.04.002 ↗
25. Rock salt-spinel structural transformation in anodically electrodeposited Mn-Co-O nanocrystals10.1021/cm703464p ↗