In situ characterization of high temperature elastic modulus and fracture toughness in air plasma sprayed thermal barrier coatings under bending by using digital image correlation
Source abstract
Abstract
Abstract The evolutions of elastic modulus and fracture toughness are the key factors affecting the failure mechanism and durability of thermal barrier coatings (TBCs). Combined the high temperature three-point bending with the digital image correlation (DIC) method, the variations of high temperature elastic modulus and fracture toughness of air plasma sprayed TBCs with temperature are determined. The surface and interfacial cracking information can be monitored real-time by DIC system. The results show that when the temperature rises from 30 °C to 800 °C, the elastic modulus and fracture toughness of TC decrease from 20.3 GPa to 13.1 GPa and from 1.31 MPa m1/2 to 1.16 MPa m1/2, respectively. And the interfacial fracture toughness increases from 83.7 J/m2 to 156.3 J/m2. These results are consistent with the available values determined in literatures, which ensures the validity of this method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Local stress evolution in thermal barrier coating system during isothermal growth of irregular oxide layer10.1016/j.surfcoat.2012.11.052 ↗
3. Mechanisms controlling the durability of thermal barrier coatings10.1016/S0079-6425(00)00020-7 ↗
4. Thermal cycling induced crack nucleation and propagation in thermal barrier coating system10.4028/www.scientific.net/KEM.462-463.383 ↗
5. Evolution of lamellar interface cracks during isothermal cyclic test of plasma-sprayed 8YSZ coating with a columnar-structured YSZ interlayer10.1007/s11666-013-9965-0 ↗
6. Investigation of interfacial properties of atmospheric plasma sprayed thermal barrier coatings with four-point bending and computed tomography technique10.1016/j.surfcoat.2012.05.099 ↗
7. Stress distribution in the vicinity of thermally grown oxide of thermal barrier coatings
8. High temperature indentation tests of YSZ coatings in air up to 1200°C10.1016/j.matlet.2017.07.091 ↗
9. Mechanics-based scaling laws for the durability of thermal barrier coatings10.1016/S0079-6425(00)00007-4 ↗
10. Microstructure and mechanical properties of yttria stabilized zirconia coatings prepared by plasma spray physical vapor deposition10.1016/j.ceramint.2015.02.141 ↗
11. Tensile test specimens with a circumferential precrack for evaluation of interfacial toughness of thermal-sprayed coatings10.1007/s11666-008-9168-2 ↗
12. Pull-off test in the assessment of adhesion at printed wiring board metallisation/epoxy interface10.1016/j.microrel.2004.01.001 ↗
13. Tensile fracture behavior of thermal barrier coatings on superalloy10.1016/j.surfcoat.2011.02.005 ↗
14. Effects of piezo-spectroscopic coefficients of 8 wt.% Y2O3 stabilized ZrO2 on residual stress measurement of thermal barrier coatings by Raman spectroscopy10.1016/j.surfcoat.2010.04.024 ↗
15. Determination of interfacial adhesion energies of thermal barrier coatings by compression test combined with a cohesive zone finite element model10.1016/j.ijplas.2014.08.003 ↗
16. Influence of high-temperature exposure on interfacial fracture toughness of thermal barrier coating10.1299/jmmp.1.1005 ↗
17. Quantitative characterization of the interfacial adhesion of Ni thin film on steel substrate: a compression-induced buckling delamination test10.1016/j.jmps.2014.09.012 ↗
18. Determination of interface fracture toughness in thermal barrier coating system by blister tests10.1115/1.1555658 ↗
19. Interfacial toughness measurements for thin films on substrates10.1016/S1359-6454(01)00354-8 ↗
20. Finite element simulation of surface micro-indentation behavior of yttria stabilized zirconia thermal barrier coatings with microstructural characteristic of columnar grains and sub-grains based on a nonlinear contact model10.1016/j.commatsci.2013.09.034 ↗
21. High temperature fracture toughness and residual stress in thermal barrier coatings evaluated by an in-situ indentation method10.1016/j.ceramint.2018.01.230 ↗
22. Effect of heat treatment on deformation and mechanical properties of 8 mol% yttria-stabilized zirconia by Berkovich nanoindentation10.1016/j.apsusc.2015.02.108 ↗
23. Three-point bend testing of HVOF Inconel 625 coating: FEM simulation and experimental investigation10.1016/j.surfcoat.2006.03.016 ↗
24. Fracture behavior under mixed-mode loading of ceramic plasma-sprayed thermal barrier coatings at ambient and elevated temperatures10.1016/j.engfracmech.2005.01.010 ↗
25. Investigation on interfacial fracture toughness of plasma-sprayed TBCs using a three-point bending method10.1016/j.surfcoat.2018.08.070 ↗
26. Experimental investigation of interface fracture characteristic of APS thermal barrier coating system under bending at 1000°C10.4028/www.scientific.net/KEM.353-358.239 ↗
27. Acoustic emission evaluation of fracture characteristics in thermal barrier coatings under bending10.1016/j.surfcoat.2013.06.085 ↗
28. Influence of transition metal on the mechanical and thermodynamic properties of IrAl thermal barrier coating10.1016/j.vacuum.2020.109203 ↗
29. Adjusting the correlation between the oxidation resistance and mechanical properties of Pt-based thermal barrier coating10.1016/j.vacuum.2019.109067 ↗
30. First-principles investigation of phonon dynamics and electrochemical performance of TiO2-x oxides lithium-ion batteries10.1016/j.ijhydene.2019.12.211 ↗
31. First-principles investigation of oxidation behavior of Mo5SiB210.1016/j.ceramint.2019.11.158 ↗
32. Hibbeler · 2008 · 254
33. Determination of mixed-mode interfacial fracture toughness for thermal barrier coatings10.1007/s11433-011-4278-0 ↗
34. Coupled effects of temperature gradient and oxidation on thermal stress in thermal barrier coating system10.1016/S0020-7683(00)00309-7 ↗
35. Elastic modulus determination of coating layers as applied to layered ceramic composites10.1016/0921-5093(91)90359-U ↗
36. A finite element assessment of influential factors in evaluating interfacial fracture toughness of thermal barrier coating10.1016/j.surfcoat.2017.01.052 ↗
37. Toughness anisotropy and damage behavior of plasma sprayed ZrO2 thermal barrier coatings10.1016/S0257-8972(99)00528-9 ↗
38. Temperature and exposure-dependent interfacial fracture toughness model for thermal barrier coatings10.1016/j.surfcoat.2018.11.087 ↗
39. Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners10.1016/j.msea.2005.05.099 ↗
40. Assessment of TBC systems failure mechanisms using a fracture mechanics approach10.1016/j.actamat.2005.06.003 ↗