Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis
Source abstract
Abstract
Abstract The B4C–SiC–HfB2 nanocomposite was synthesized by mechanically activated self-propagating high-temperature synthesis. The starting materials, including B2O3, HfO2, Mg, Si and C, were mixed to form the composite with 1:1:1 and 5:4:1 molar ratio. The powders were synthesized in the tubular furnace at 900 °C and the spark plasma sintering (SPS) furnace at 575 °C. The XRD pattern of the synthesized sample according to form the composite with 1:1:1 molar ratio showed the presence of HfB2, MgO and HfO2. The phase and microstructural analyses verified that the leached sample contained SiC, HfB2 and HfO2. Thus, the B4C could not be successfully synthesized when the 1:1:1 M ratio was chosen. However, the B4C–SiC–HfB2 composite was successfully synthesized by choosing the 5:4:1 molar ratio with a combustion reaction after optimizing activation energy to 6h. The B4C–SiC–HfB2 nanocomposite could also be formed by SPS at 575 °C, but some graphite remained in the system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Development of B4C–HfB2 composites by reaction hot pressing10.1016/j.ijrmhm.2012.03.004 ↗
2. Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition10.1016/j.jeurceramsoc.2013.01.018 ↗
3. Boron carbide: structure, properties, and stability under stress10.1111/j.1551-2916.2011.04865.x ↗
4. Synthesis and consolidation of boron carbide: a review10.1179/095066009X12506721665211 ↗
5. A review of ceramics for armor applications
6. Study of fracture behavior of very fine-grained silicon carbide ceramics10.1111/j.1151-2916.1990.tb06720.x ↗
7. Simulation study of single event effects in the SiC LDMOS with a step compound drift region10.1016/j.microrel.2018.09.002 ↗
8. Preparation and thermoelectric characterization of SiC-B 4 C composites10.1007/s11664-010-1129-0 ↗
9. Pressureless densification and mechanical properties of hafnium diboride doped with B4C: from solid state sintering to liquid phase sintering10.1016/j.jeurceramsoc.2010.04.033 ↗
10. Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds10.1016/S0955-2219(99)00129-6 ↗
11. UHTCs: ultra-high temperature ceramic materials for extreme environment applications10.1149/2.F04074IF ↗
12. Densification behaviour and mechanical properties of B4C–SiC intergranular/intragranular nanocomposites fabricated through spark plasma sintering assisted by mechanochemistry10.1016/j.ceramint.2016.10.150 ↗
13. HfB2–SiC composite prepared by reactive spark plasma sintering10.1016/j.ceramint.2014.03.107 ↗
14. Microstructure and mechanical properties of B4C–HfB2–SiC ternary eutectic composites prepared by arc melting10.1016/j.jeurceramsoc.2015.11.044 ↗
15. The effect of B4C on the microstructure and thermo-mechanical properties of HfB2-based ceramics10.1016/j.jallcom.2008.05.093 ↗
16. Room-temperature mechanochemical synthesis and consolidation of nanocrystalline HfB2-HfO2 composite powders
17. Direct combustion synthesis of silicon carbide nanopowder from the elements10.1111/jace.12107 ↗
18. Influence of C addition on solid-state reaction of Ti-Si-C system10.1016/j.matchemphys.2018.07.003 ↗
19. Weimer · 2012
20. Combustion synthesis of advanced materials: Part I. reaction parameters10.1016/0079-6425(94)00011-5 ↗
21. Barin · 2013
22. Microstructure and mechanical properties of Ti5Si3 fabricated by spark plasma sintering10.1016/j.jallcom.2018.11.319 ↗
23. Microstructure and mechanical properties of an ultrafine grained Ti5Si3-TiC composite fabricated by spark plasma sintering10.1016/j.apt.2019.02.013 ↗
24. Effect of Mg/B2O3 molar ratio and furnace temperature on the phase evaluation and morphology of SiC–B4C nanocomposite prepared by MASHS method10.1016/j.matchemphys.2015.05.031 ↗
25. Effect of heating rate on the formation of intermetallics during SHS process10.12693/APhysPolA.128.561 ↗
26. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide
27. Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride
28. Aluminum nitride as an alternative ceramic for fabrication of microchannel heat exchangers: a numerical study10.1016/j.ceramint.2020.01.195 ↗
29. Heat transfer and pressure drop in a ZrB2 microchannel heat sink: a numerical approach
30. A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB210.1016/j.ceramint.2019.08.112 ↗
31. The effect of thermal contact resistance on the temperature distribution in a WC made cutting tool10.1016/j.ceramint.2019.07.241 ↗
32. Heat transfer, thermal stress and failure analyses in a TiB2 gas turbine stator blade10.1016/j.ceramint.2019.06.184 ↗
33. Numerical analyses of heat transfer and thermal stress in a ZrB2 gas turbine stator blade10.1016/j.ceramint.2019.05.344 ↗
34. TiB2–SiC-based ceramics as alternative efficient micro heat exchangers10.1016/j.ceramint.2019.06.150 ↗
35. Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites10.1016/j.ceramint.2020.01.192 ↗
36. Nano-diamond reinforced ZrB2–SiC composites10.1016/j.ceramint.2020.01.008 ↗
37. Triplet carbide composites of TiC, WC, and SiC
38. Influence of TiB2 content on the properties of TiC–SiCw composites
39. Influence of sintering temperature on microstructure and mechanical properties of Ti–Mo–B4C composites
40. Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics