3D printing of porous scaffolds BaTiO3 piezoelectric ceramics and regulation of their mechanical and electrical properties
Source abstract
Abstract
Abstract A series of porous scaffolds of piezoelectric ceramic barium titanate (BaTiO3) were successfully fabricated by Digital Light Processing (DLP) 3D printing technology in this work. To obtain a high-precision and high-purity sample, the debinding sintering profile was explored and the optimal parameters were determined as 1425 °C for 2h. With the increase of scaffolds porosity from 10% to 90%, the compressive strength and piezoelectric coefficient (d33) decreased gradually. The empirical formulas about the mechanical and piezoelectric properties were obtained by adjusting BaTiO3 ceramics with different porosity. In addition, the distribution of potential and stress under 100 MPa pressure were studied by the finite element method (FEM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Co-sintered PZT ceramics for the piezoelectric transformers10.1016/j.ceramint.2015.03.274 ↗
2. Piezoelectric and ferroelectric materials and structures for energy harvesting applications10.1039/C3EE42454E ↗
3. Properties of piezoelectric ceramic with textured structure for energy harvesting10.1016/j.ceramint.2011.05.014 ↗
4. Improved activity of MC3T3-E1 cells by the exciting piezoelectric BaTiO3/TC4 using low-intensity pulsed ultrasound
5. Scaffold fabrication technologies and structure/function properties in bone tissue engineering
6. Lead-free piezoceramics
7. Multilayered ceramic composites – a review
8. Near-Net-Shaping methods for ceramic elements of (Body) armor systems10.1111/jace.13192 ↗
9. Modern approaches for the production of ceramic components10.1016/S0955-2219(96)00163-X ↗
10. Diameter prediction of removal particles in Al2O3 ceramic laser cutting based on vapor-to-melt ratio10.1016/j.jmatprotec.2017.08.011 ↗
11. Electrical and physical characterization of bulk ceramics and thick layers of barium titanate manufactured using nanopowders10.1007/s11665-007-9110-7 ↗
12. 3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing10.1007/s10853-018-1992-2 ↗
13. Fine lattice structural titanium dioxide ceramic produced by DLP 3D printing10.1016/j.ceramint.2019.07.346 ↗
14. Influence of bimodal particle distribution on material properties of BaTiO3 fabricated by paste extrusion 3D printing10.1016/j.ceramint.2021.03.171 ↗
15. 3D-printed flexible, Ag-coated PNN-PZT ceramic-polymer grid-composite for electromechanical energy conversion10.1016/j.nanoen.2020.104737 ↗
16. Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres10.1016/j.ceramint.2019.10.144 ↗
17. Porous mullite ceramics with enhanced mechanical properties prepared by SLS using MnO2 and phenolic resin coated double-shell powders10.1016/j.ceramint.2019.07.090 ↗
18. Preparation of porous Al2O3 ceramics with enhanced properties by SLS using Al2O3 poly-hollow microspheres (PHMs) coated with CaSiO3 sintering additive10.1016/j.ceramint.2020.07.165 ↗
19. A review of additive manufacturing of cermets
20. 3D printing of kaolinite clay ceramics using the Direct Ink Writing (DIW) technique10.1016/j.ceramint.2017.12.219 ↗
21. Preliminary 3D printing of large inclined-shaped alumina ceramic parts by direct ink writing10.1007/s40145-020-0369-6 ↗
22. Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics10.1007/s40145-020-0380-y ↗
23. Influence of bimodal particle distribution on material properties of BaTiO3 fabricated by paste extrusion 3D printing10.1016/j.ceramint.2021.03.171 ↗
24. Critical energy for photopolymerization of ceramic suspensions in acrylate monomers10.1016/j.jeurceramsoc.2010.08.003 ↗
25. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolitho graphymethod10.1016/j.ceramint.2018.11.116 ↗
26. Fabrication and properties of a high porosity h-BN-SiO2 ceramics fabricated by stereolithography-based 3D printing10.1016/j.matlet.2018.10.058 ↗
27. Investigation on 3D printing ZrO2 implant abutment and its fatigue performance simulation10.1016/j.ceramint.2020.08.221 ↗
28. 3D printing of TPMS structural ZnO ceramics with good mechanical properties10.1016/j.ceramint.2021.01.152 ↗
29. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology10.1016/j.jeurceramsoc.2018.06.046 ↗
30. Additive manufacturing of ceramics: issues, potentialities, and opportunities10.1111/jace.13700 ↗
31. Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method10.1016/j.ceramint.2017.11.135 ↗
32. Photopolymerizable resins for 3D-printing solid-cured tissue engineered implants10.2174/1389450120666190114122815 ↗
33. Preparation of broadband transparent Si3N4-SiO2 ceramics by digital light processing (DLP) 3D printing technology10.1016/j.jeurceramsoc.2021.04.045 ↗
34. Dense ceramics with complex shape fabricated by 3D printing: a review10.1007/s40145-020-0444-z ↗
35. Complex geometry strain sensors based on 3D printed nanocomposites: spring, three-column device and footstep-sensing platform10.3390/nano11051106 ↗
36. Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect
37. Effects of fine grains and sintering additives on stereolithography additive manufactured Al2O3 ceramic10.1016/j.ceramint.2020.09.071 ↗
38. Electrical properties of ZrB2-SiC ceramics with potential for heating element applications10.1016/j.ceramint.2014.02.029 ↗
39. Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior10.1016/j.jeurceramsoc.2020.12.004 ↗
40. 3D printing of ceramic cellular structures for potential nuclear fusion application
41. Mechanical properties and microstructures of 3D printed bulk cordierite parts10.1016/j.ceramint.2019.06.174 ↗
42. Photopolymerization-based additive manufacturing of ceramics: a systematic review10.1007/s40145-021-0468-z ↗
43. High-performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing10.1007/s40145-020-0415-4 ↗
44. Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer10.1016/j.jeurceramsoc.2021.04.044 ↗
45. 3D-printing piezoelectric composite with honeycomb structure for ultrasonic devices10.3390/mi11080713 ↗
46. Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response10.1038/s41563-018-0268-1 ↗
47. Stereolithography for the fabrication of ceramic three-dimensional parts10.1108/13552549810222867 ↗
48. Optimizing electrical poling for tetragonal, lead-free BZT–BCT piezoceramic alloys10.1016/j.jeurceramsoc.2013.05.032 ↗
49. Poling temperature-insensitive piezoelectric constant of high-performance potassium sodium niobate piezoceramics10.1111/jace.17135 ↗