journal article·2016-12

High temperature mechanical properties of laminated ZrB2–SiC based ceramics

Chuncheng Wei, Xinchao Liu, Jinye Niu, Liu Feng, Hongzhi Yue

Ceramics International· Volume 42· Issue 16
Publisher page

Abstract

Abstract Two laminated ZrB 2 -SiC based ceramics were prepared by tape casting and subsequent hot pressing, with BN (LZB) and graphite (LZG ) as interface layers. The LZB specimen presents flexural strength of 381 MPa at room temperature and 111 MPa at 1500 °C; while the LZG specimen shows flexural strength of 414 MPa at room temperature and 377 MPa at 1500 °C. In addition, the flexural strength of LZG specimen is always higher than that of the LZB specimen in the temperature range from room temperature to 1500 °C. Such higher strength is attributed to the healing of surface microcracks and pores by the SiO 2 glass phase, producing less glass phase in graphite interface layers at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ablation in different heat fluxes of C/C composites modified by ZrB2-ZrC and ZrB2-ZrC-SiC particles10.1016/j.corsci.2013.04.038 ↗
2. Improved green strength and green machinability of ZrB2-SiC through gel casting based on a double gel network10.1111/jace.13076 ↗
3. Toughened ZrB2-based ceramics through SiC whisker or SiC chopped fiber additions10.1016/j.jeurceramsoc.2009.11.012 ↗
4. Properties of ZrB2–SiC ceramics by pressureless sintering10.1111/j.1551-2916.2009.03039.x ↗
5. Improving high temperature properties of hot pressed ZrB2-20vol% SiC ceramic using high purity powders10.1016/j.ceramint.2012.06.018 ↗
6. Strong ZrB2–SiC–WC ceramics at 1600°C10.1111/j.1551-2916.2011.05062.x ↗
7. High temperature fracture behavior of ZrB2–SiC–graphite composite in vacuum and air10.1016/j.jallcom.2014.08.255 ↗
8. Ultra-high-temperature tensile properties and fracture behavior of ZrB2-based ceramics in air above 1500°C10.1016/j.matdes.2013.05.045 ↗
9. The resistance to oxidation of an HfB2–SiC composite10.1016/j.jeurceramsoc.2004.05.009 ↗
10. Characterisation and high temperature mechanical properties of zirconium boride-based materials10.1016/S0955-2219(02)00114-0 ↗
11. Advances in microstructure and mechanical properties of zirconium diboride based ceramics10.1016/S0921-5093(02)00520-8 ↗
12. The fabrication and mechanical properties of bionic laminated ZrB2–SiC/BN ceramic prepared by tape casting and hot pressing10.1016/j.scriptamat.2011.07.031 ↗
13. Laminated ZrB2–SiC ceramic with improved strength and toughness10.1016/j.scriptamat.2010.10.005 ↗
14. Beneficial effects of an ultra-fine α-SiC incorporation on the sinterability and mechanical properties of ZrB210.1007/s00339-005-3327-9 ↗
15. Fabrication and properties of ZrB2–SiC–BN machinable ceramics10.1016/j.jeurceramsoc.2009.09.022 ↗
16. Flexural creep deformation of ZrB2/SiC ceramics in oxidizing atmosphere10.1111/j.1551-2916.2008.02370.x ↗
17. Oxidation behavior of ZrB2–MoSi2–SiC composites in air at 1500°C10.1016/j.ceramint.2010.09.034 ↗
18. Oxidation Behavior of ZrB2–SiC–TaC Ceramics10.1111/j.1551-2916.2011.04945.x ↗
19. Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500°C10.1016/j.jeurceramsoc.2006.10.012 ↗
20. Thermodynamic analysis of ZrB2–SiC oxidation: formation of a SiC-depleted region10.1111/j.1551-2916.2006.01329.x ↗
21. Effect of interlayer on the ablation properties of laminated HfC–SiC ceramics under oxyacetylene torch10.1016/j.corsci.2015.01.021 ↗
22. Multilayer ceramic composites with high failure resistance10.1016/j.jeurceramsoc.2006.04.030 ↗
23. Thermal shock of layered ceramic structures with crack-deflecting interfaces10.1111/j.1151-2916.2001.tb00615.x ↗
24. Biomimetic structure design–a possible approach to change the brittleness of ceramics in nature10.1016/S0928-4931(00)00133-8 ↗
25. Design and production of ceramic laminates with high mechanical resistance and reliability
26. Residual stresses, strength and toughness of laminates with different layer thickness ratios10.1016/j.actamat.2006.06.008 ↗