Investigations on mechanical behavior of hot rolled Al7075/TiO2/Gr hybrid composites
Source abstract
Abstract
Abstract In the present work, influence of titanium dioxide (TiO2) and graphite (Gr) hybrid reinforcement on microstructure and mechanical behavior of Al7075 alloy is studied. Al7075 and its hybrid composite samples were fabricated by using stir-casting and hot rolling technique. Hot rolling was carried out at a temperature of 450 °C with a reduction-ratio of 90%. Microstructure examination showed a good dispersion of titanium dioxide and graphite reinforcement particles with excellent bond with Al7075 matrix alloy. In case of hot rolling, both the reinforcements were found to be aligned in the direction of rolling. The microhardness and tensile strength of hybrid composites were remarkably improved in case of hot rolling compared to that of cast composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Structural characterization of Aluminum alloy 7075-graphite composites fabricated by mechanical alloying and hot extrusion10.1016/j.matdes.2013.08.005 ↗
2. Microstructure evolution in aluminium alloy 7050 during processing10.1016/j.msea.2004.05.006 ↗
3. Comparison of mechanical properties of RE-7075 Al alloys hot rolled sheet and cold rolled sheet10.4028/www.scientific.net/AMM.152-154.661 ↗
4. Mechanical and thermal properties of AA7075/TiO2/Fly ash hybrid composites obtained by hot forging10.1016/j.pnsc.2017.08.005 ↗
5. Study of characteristics of al + 5 wt.% TiO2 + 6 wt.% gr hybrid p/m composite powders prepared by ball milling process10.1007/s11003-016-9880-x ↗
6. “Microstructure and mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites”10.1016/j.msea.2008.10.012 ↗
7. Asthana · J. Mater. Sci. · 1998 · 33
8. Interface characterization of an SiC particulate/6061 aluminium alloy composite10.1016/0010-4361(94)90201-1 ↗
9. Preparation of nickel-coated powders as precursors to reinforce MMCs10.1023/A:1004860326071 ↗
10. The effect of forging on the properties and microstructure of saffil fibre reinforced aluminium10.1016/0266-3538(93)90055-L ↗
11. Elevated temperature mechanical properties of Al Alloy AA6063/SiCp MMCs
12. High strain rate response of aluminum 6092/B4C composites10.1016/j.msea.2004.05.027 ↗
13. Influence of hot rolling on microstructure and mechanical behaviour of Al6061-ZrB2 in-situ metal matrix composites10.1016/j.msea.2018.09.104 ↗
14. Investigation on mechanical Behavior of hot rolled Al7075-TiB2 in-situ metal matrix composite
15. Study on mechanical properties of graphite particulates reinforced aluminium matrix composite fabricated by stir casting technique
16. Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method10.1016/j.wear.2008.05.013 ↗
17. Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites10.1016/j.jmrt.2020.02.002 ↗
18. Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys – SiC fine particulates reinforced composites10.1016/j.jmatprotec.2011.10.016 ↗
19. Synthesis and analysis of mechanical and tribological behaviour of silicon carbide and graphite reinforced aluminium alloy hybrid composites
20. Effect of thermo-mechanical processing and heat treatment on the tribological characteristics of Al based MMC’s10.1088/1757-899X/149/1/012118 ↗
21. Mechanical characteristics of hot forged Al6061-Al2O3 composite10.4028/www.scientific.net/AMM.787.598 ↗
22. www.azom.com/article.aspx?ArticleID=1179-TiO2 Access date- 31-08-2020..
23. www.azom.com/article.aspx?ArticleID=1630 and 516 -Gr Access date- 31-08-2020..
24. https://www.azom.com/properties.aspx?ArticleID=516-Gr access date- 01-09-2020.
25. Fabrication of hybrid (Al+TiO2+Gr) metal matrix composites an Experimental Study
26. Synthesis of Al-TiO2 Composites through liquid powder metallurgy route
27. Study of hardness and tensile strength of Aluminium-7075 percentage varying reinforced with graphite and bagasse-ash composites
28. Shashi Prakash Dwivedi, Ajay Kumar, “Development of Graphite and Alumina Reinforced Aluminium Based Composite Material”, Received 9 May 2020, Accepted 16 May 2020, Available online 13 June 2020.
29. Experimental and numerical investigation of al 6061 alloys reinforced with SiC-TiO2