Improved corrosion resistance of AZ91D magnesium alloy coated by novel cold-sprayed Zn-HA/Zn double-layer coatings
Source abstract
Abstract
Abstract In order to improve the corrosion resistance and bioactivity of biodegradable Mg alloy substrate, novel Zn-HA/Zn double-layer coatings with different HA/Zn ratios in weight were deposited on AZ91D substrates by cold spraying. Phase compositions and microstructures of as-sprayed coatings and coatings after corrosion tests were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Electrochemical corrosion behaviors of both Zn-HA/Zn double-layer coatings were investigated in Hanks’ simulated body fluid using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Results showed that both the pure Zn coating and HA/Zn composite coatings presented the similar phase compositions with their primary powders in addition to Zn oxidizations. Zn powders were plastically deformed and partially oxidized due to its low melting point, while HA powders were mainly crashed into fragments and hill-like splats. Both Zn under layer and HA/Zn upper layer were well bonded and presented dense structures, differences in HA/Zn upper layers were related to the HA/Zn ratios. Potentiodynamic polarization and EIS measurements illustrated that the cold-sprayed Zn-HA/Zn double-layer coatings not only improve the corrosion resistance of Mg alloy substrates, but also enhance its bioactivity due to the HA existed in composite upper layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Biodegradable magnesium alloys for orthopaedic applications: a review on corrosion, biocompatibility and surface modifications10.1016/j.msec.2016.06.020 ↗
2. Review of magnesium-based biomaterials and their applications10.1016/j.jma.2018.02.003 ↗
3. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
4. Zinc alloys for biodegradable medical implants10.4028/www.scientific.net/MSF.782.457 ↗
5. Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation10.1016/j.actbio.2011.05.008 ↗
6. Considerations in estimates of requirements and critical intake of zinc. Adaption, availability and interactions10.1039/AN9952000913 ↗
7. The corrosion behavior of cold sprayed zinc coatings on mild steel substrate10.1007/s11666-013-9893-z ↗
8. Plasma-sprayed hydroxylapatite coatings as biocompatible intermediaries between inorganic implant surfaces and living tissue10.1007/s11666-018-0737-8 ↗
9. Microstructure and corrosion behavior of thermal-sprayed hydroxyapatite/magnesium composite coating on the surface of AZ91D magnesium alloy10.1007/s11666-018-0815-y ↗
10. Hydroxyapatite-coated magnesium-based biodegradable alloy: cold spray deposition and simulated body fluid studies10.1007/s11665-013-0589-9 ↗
11. Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coating10.1016/j.apsusc.2010.08.089 ↗
12. A novel bioactive Ta/hydroxyapatite composite coating fabricated by cold spraying10.1016/j.matlet.2019.04.123 ↗
13. Corrosion behavior of low pressure cold sprayed Zn-Ni composites coating10.1108/ACMM-11-2014-1470 ↗
14. Corrosion behavior of low pressure cold sprayed Zn-Ni composite coatings10.1016/j.jallcom.2017.05.134 ↗
15. Influence of cold spray parameters on the microstructures and residual stress of Zn coatings sprayed on mild steel10.1016/j.surfcoat.2017.03.062 ↗
16. Functionalized coatings by cold spray: an in vitro study of micro- and nanocrystalline hydroxyapatite compared to porous titanium10.1016/j.msec.2018.02.009 ↗
17. Optimization of multiple responses using overlaid contour plot and steepest methods analysis on hydroxyapatite coated magnesium via cold spray deposition10.1016/j.surfcoat.2015.09.006 ↗
18. Morphological, structural and mechanical characterization of cold sprayed hydroxyapatite coating10.1016/j.surfcoat.2018.10.056 ↗
19. Improved bonding strength of bioactive cermet cold gas spray coatings10.1016/j.msec.2014.08.053 ↗
20. Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks' solution10.1016/j.electacta.2012.01.018 ↗
21. Impact formation and microstructure characterization of thermal sprayed hydroxyapatite titania composite coatings10.1016/S0142-9612(02)00431-3 ↗
22. XPS characterization of biocompatible hydroxyapatite-polymer coatings10.1002/sia.1249 ↗
23. Scratch resistance and electrochemical corrosion behavior of hydroxyapatite coatings on Ti6Al4V in simulated physiological media10.1007/s10800-012-0504-3 ↗
24. Enhanced mechanical strength of hydroxyapatite nanorods reinforced with polyethylene10.1007/s11051-010-9932-3 ↗
25. Electrophoretic deposition of double-layer HA/Al composite coating on NiTi10.1016/j.msec.2015.09.035 ↗
26. Transformation of monetite to hydroxyapatite in bioactive coatings on titanium10.1016/S0257-8972(00)01125-7 ↗
27. Fabrication and characterization of ZnO@CdS core-shell nanostructure using acetate precursors: XRD, FESEM, DRS, FTIR studies and effects of cadmium ion concentration on band gap10.1016/j.saa.2014.04.110 ↗
28. Bonding mechanism in cold gas spraying10.1016/S1359-6454(03)00274-X ↗
29. Bonding features and associated mechanisms in kinetic sprayed titanium coatings10.1016/j.actamat.2009.07.061 ↗
30. Suitable concentration of ZnO nanoparticles enhanced biomaterial synthesis and plant cell protection10.4028/www.scientific.net/AMM.866.21 ↗
31. Thermal plasma spraying as a new approach for preparation of zinc biodegradable scaffolds: a complex material characterization10.1007/s11666-019-00849-1 ↗
32. Biodegradable Mg/HA/TiO2 nanocomposites coated with MgO and Si/MgO for orthopedic applications: a study on the corrosion, surface characterization, and biocompatability
33. Plasma-sprayed hydroxyapatite coating for improved corrosion resistance and bioactivity of magnesium alloy10.1007/s11666-018-0760-9 ↗
34. Microstructures and properties of warm-sprayed carbonated hydroxyapatite coatings10.1007/s11666-018-0735-x ↗